| New RF and Microwave Products . |
|
|
| True-RMS Thermal RF Power Sensor from 9 kHz to 54 GHz | |
RF Power Meter & Sensor
from LadyBug Technologies
|
| The LB5954L from LadyBug Technologies is a True-RMS Power Sensor that operates from 9 kHz to 54 GHz. It can measure average continuous power from -60 dBm to +26 dBm (~400 mW) and peak input pulsed power of up to 2 W. This sensor utilizes a high accuracy, thermally stabilized, two-path, RMS responding, square law diode detection scheme that can accurately measure any signal regardless of modulation bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 24 GHz 5G Band Pass Filter | |
Band Pass Filter
from Knowles
|
| The 943504 from Knowles is a 5G Bandpass Filter with a passband from 23.80 to 24.20 GHz and a center frequency of 24 GHz. It has a passband insertion loss of 2.6 dB and has a quality factor of 59.672. This bandpass filter is available as a module that measures 51.31 x 12.70 x 10.80 mm and comes with SMA or K-Type field replaceable connector options. |
| |
Download Datasheet
Product Details | |
|
|
|
| 39.5 dBm GaN Power Amplifier from 0.3 to 6 GHz | |
RF Amplifier
from Analog Devices
|
| The ADPA1116 from Analog Devices is a GaN Power Amplifier that operates from 0.3 to 6 GHz. It delivers a saturated output power of 39.5 dBm (~8.9 W) with a small signal gain of 33.5 dB and a power-added efficiency (PAE) of 40%. This amplifier has internally matched RF input and output ports with AC coupling and an integrated drain bias inductor. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W GaN Power Amplifier from 2 to 6 GHz | |
RF Amplifier
from RFHIC
|
| The RWP2060080-50 from RFHIC is a GaN Power Amplifier that operates from 2 to 6 GHz. It provides an output power of 100 W with up to 50 dB of gain and has an average efficiency of 22%. This Class AB amplifier requires a 40 V supply voltage. It is available in a rugged module with SMA/N-Type connectors and has excellent thermal properties. |
| |
Download Datasheet
Product Details | |
|
|
|
| 9kW Solid State Power Amplifier from 1.0 to 2.0 GHz | |
RF Amplifier
from Advanced Amplifiers
|
| The AA-12G-8KWP from Advanced Amplifiers is a Solid State Power Amplifier that operates from 1.0 to 2.0 GHz. It delivers a peak pulse output power of 9.0 KW and a power gain of more than 69 dB. This class AB linear amplifier provides instantaneous L-Band octave bandwidth and has an input return loss of less than -10 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 4-Port USB-Controlled Vector Network Analyzer from 300 kHz to 6.5 GHz | |
Vector Network Analyzer
from Bird
|
| The BNA1000-4P6G5 from Bird is a 4-Port USB-Controlled Vector Network Analyzer (VNA) that operates from 300 kHz to 6.5 GHz. This VNA is designed for RF and manufacturing engineers who prioritize precision and versatility during design and production stages. It combines the detailed analysis capabilities of a benchtop unit with the adaptability required for diverse manufacturing and R&D environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Port USB Controlled Lab Grade VNA from 300 kHz to 6.5 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SC5065 from Copper Mountain Technologies is a modular 2-port compact lab grade VNA that operates from 300 kHz to 6.5 GHz. This small USB Controlled lab grade VNA has high speeds, a wide dynamic range, and high output power, with features like time domain and gating conversion, segmented frequency sweeps, linear/ logarithmic sweeps, power sweeps, multiple trace formats, 16 channels max. with up to 16 traces each, marker math, and limit tests. |
| |
Download Datasheet
Product Details | |
|
|
|
| WRD650 Double Ridge Bandpass Filter with Passband from 6 to 18 GHz | |
Waveguide Filter
from Scientific Microwave Corporation
|
| The WRD650 Bandpass Filter from Scientific Microwave Corporation is a Double Ridge Waveguide Bandpass Filter with a passband from 6 to 18 GHz. It has a passband insertion loss of 1.2 dB and provides a rejection of more than 45 dB above and below the passband. This double ridge BPF has a VSWR of 1.50:1 at the waveguide port and a VSWR of 1.60:1 at the coaxial port. |
| |
Download Datasheet
Product Details | |
|
|
|
| Design & Simulate Flexible Printed Circuit Boards | |
Software
from Remcom
|
| The XFdtd software from Remcom is ideal for simulating flexible PCBs because leading layout tools produce a flat design. Without efficient simulation software, manually adding multiple bends is a painstakingly slow process. To replicate the physical model, XF’s wrapping capability supports full, multi-layer flexible PCBs during import, eliminating the need to wrap individual layers and parts manually. |
| |
Download Datasheet
Product Details | |
|
|
|
| 64x4 Digital Matrix Attenuator from 600 to 7250 MHz | |
Attenuator Matrix
from Vaunix
|
| The VMA-64X4-8110 from Vaunix is a 64x4 Digital Matrix Attenuator that operates from 600 to 7250 MHz. It has 64 input and 4 output bidirectional channels that provide an attenuation of 120 dB in 0.1 dB steps on all 64 possible path combinations. This non-blocking attenuator matrix has an insertion loss of 20 to 25 dB and a switching speed of 2 µs. |
| |
Download Datasheet
Product Details | |
|
|
|
| High Mechanical Strength Miniature OCXO from 8 to 100 MHz | |
OCXO
from Dynamic Engineers
|
| The OCXO3315C from Dynamic Engineers is a High-Strength Mechanical Strength OCXO that operates from 8 to 100 MHz. It produces an HCMOS (TTL) output of over 2.4 V or 3.7 V and a sinewave output of +4 dBm or +7 dBm. This low-power OCXO has a phase noise of less than -170 dBc/Hz, warm-up time of 60 s, and a frequency stability of up to ± 10 ppb from -40°C to 85°C. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3GPP Rel-12 LTE Cat 6 Module | |
Cellular Module
from Quectel
|
| The EM060K from Quectel is an LTE Cat 6 Module that supports global LTE-A and UMTS/HSPA+ coverage. It is based on 3GPP Release 12 technology and delivers a downlink data rate of 300 Mbps and an uplink data rate of 50 Mbps. This module supports DL 2 Carrier Aggregation and 64QAM modulation scheme. It supports MIMO technology to meet demands for data rate and link reliability in modem wireless communication systems. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Dual-band GNSS Receiver for Automotive OEM/Tier 1 Applications | |
GNSS Module
from FURUNO Electric Co., Ltd.
|
| The ePV9000B from Furuno is a Dual-band GNSS Receiver that supports GPS L1CA/L5, Galileo E1/E5a, BDS B1I/B1C/B2a, GLONASS L1OF, QZSS L1CA/L1CB/L5, and SBAS L1/L5 bands. This GNSS receiver has 62 channels for GNSS reception and an update rate of up to 10 Hz providing a position accuracy of 0.5 m DRMS (63%) enabling lane-level navigation in automotive applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Miniature Signal Generator from 10 MHz to 15 GHz | |
Signal Generator
from Atlantic Microwave
|
| The SG15-840002 from ETL Systems is a Miniature Signal Generator that operates from 10 to 15000 MHz covering L, S, and C frequency bands. It delivers an output power up to 13 dBm in 0.5 dB steps and has a frequency step size of 1 to 10 Hz. This signal generator has spurious levels of less than -70 dBc and harmonics of -25 dBc with a phase noise of less than -120 dBc/Hz (@100 KHz offset). |
| |
Download Datasheet
Product Details | |
|
|
|
| Wi-Fi 6/6E/7 RF Front-End Modules for Computing Applications | |
Front End Module
from Qualcomm
|
| The QXM109X from Qualcomm are Wi-Fi RF Front-End (RFFE) Modules that operate in the 2.4 GHz, 5 GHz, and 6 GHz bands. They support Wi-Fi 6, Wi-Fi 6E, and Wi-Fi 7 over a bandwidth of 320 MHz using 4K-QAM modulation. These modules have integrated active and passive components that cover a wide breadth of IEEE 802.11b/g/ac/ax/be applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Wi-Fi 7 (802.11be) Front End Module | |
Front End Module
from Qorvo
|
| The QPF4239 from Qorvo is a Wi-Fi 7 (802.11be) Front-End Module (FEM) that operates from 2412 to 2484 MHz. It consists of a 2.4 GHz power amplifier (PA), single pole two throw switch (SP2T), and by-passable low noise amplifier (LNA). This FEM also has an RF output coupler and a broad-range, constant slope voltage logarithmic power detector for application feedback. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Package for MMICs from DC to 95 GHz | |
RF Package
from Nuvotronics, Inc.
|
| The PSP1028108 from Nuvotronics, Inc. is an RF Package for MMICs from DC to 95 GHz. It has an insertion loss of less than 0.5 dB and a return loss of 20 dB. This RF package has a solid copper construction for exceptional thermal performance. It measures 1.6 x 1.6 x 0.7 mm and is chip interface compatible with automated Au wire bonding or can be surface mounted to a PCB using standard SMT processes. |
| |
Download Datasheet
Product Details | |
|
|
|
| Fixed Waveguide Attenuators from 26.5 to 110 GHz | |
Waveguide Attenuator
from Pasternack Enterprises Inc
|
| The PEWAT1007 Series from Pasternack are Fixed Waveguide Attenuators that operate from 26.5 to 110 GHz. They are available in attenuation values of 3, 6, 10, 20, and 30 dB and can handle an input power of up to 5 W with a VSWR of 1.15:1. These attenuators are housed in a gold-plated aluminum enclosure that measures 2 x 0.75 x 0.92 inches and are available with WR-10, WR-12, WR-15, WR-19, WR-22, and WR-28 waveguide size options, each with UG-599/U cover flange. |
| |
Download Datasheet
Product Details | |
|
|
|
| Omnidirectional 5G-NR Pole/Screw Mount Antenna from 617 to 5925 MHz | |
Antenna
from 2J Antennas
|
| The 2J7A83JB-B16J from 2J Antennas is a 5G-NR Antenna that operates from 617-960 MHz, 1427-2690 MHz, 3300-5000 MHz, and 5150-5925 MHz. This linearly polarized antenna provides a peak gain of 3.6 dBi with an efficiency of 56.3% and has a VSWR of 1.7:1. It supports 5G-NR, 4G LTE, FirstNet, CBRS, LPWA, CAT-X, CAT-Mx, CAT-NBx, NB-IoT, 3G, and 2G, providing backward compatibility with the existing networks. |
| |
Download Datasheet
Product Details | |
|
