| Featured Products this Week . |
|
|
| 4-Port USB-Controlled Vector Network Analyzer from 300 kHz to 8.5 GHz | |
Vector Network Analyzer
from Bird
|
| The BNA1000-4P8G5 from Bird is a 4-port USB-Controlled Vector Network Analyzer (VNA) that operates from 300 kHz to 8.5 GHz. It is ideal for RF and manufacturing engineers who prioritize precision and versatility during design and production. This VNA uniquely combines the detailed analysis capabilities of a benchtop unit with the adaptability required for diverse manufacturing and R&D environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Port PXIe Vector Network Analyzer from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The PXIe-S5090 from Copper Mountain Technologies is a 2-Port Vector Network Analyzer (VNA) that operates from 300 kHz to 9 GHz. It can measure all S-parameters (S11, S21, S12, and S22) and has a measurement bandwidth from 1 Hz to 1 MHz. This analyzer delivers metrology-grade performance and speed to National Instruments’ PXI system. |
| |
Download Datasheet
Product Details | |
|
|
|
| Average, Peak & Pulse Power Sensor from 50 MHz to 8 GHz | |
RF Power Meter & Sensor
from LadyBug Technologies
|
| The LB480A is a 100 MHz to 8 GHz (Usable to 10 GHz) USB power sensor that can measure repetitive peak, pulse and average power signals. It has a measurement range from -60 to 20 dBm, video bandwidth of 10 MHz and a VSWR of 1.09:1. The LB480A is specifically targeted at those applications requiring the detailed analysis of pulse and other repetitive modulated formats. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 V Bias Tee from 160 kHz to 95 GHz | |
Bias Tee
from HYPERLABS
|
| The HL9448 from Hyperlabs is a Bias Tee that operates from 160 kHz to 95 GHz. It has a DC breakdown voltage of up to 30 V and a breakdown current of 175 mA. The bias tee has an insertion loss of less than 2.5 dB and a rise time of 3.7 ps. It has an amplitude match of ±0.1 dB and a phase match of ±4°. This bias tee is available in a module that measures 49.53 x 33.02 x 13.46 mm and has 1.0 mm jack/plug connector options. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wire-Wound Ceramic Chip Inductors from 0.45 to 24 nH | |
RF Inductor
from Coilcraft
|
| The 016008C Series from Coilcraft are Ceramic Chip Inductors with inductance values from 0.45 to 24 nH. These wire-wound inductors have a DC resistance of less than 1550 mOhms and can handle up to 550 mA of RMS current @ 25°C. They have a higher Q-factor than their thin-film counterparts, making them suitable for high-frequency applications in cell phones, wearable devices, and LTE or 5G IoT networks. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W GaN Instrumentation Power Amplifier from 18 to 26.5 GHz | |
RF Amplifier
from Maury Microwave
|
| The MPA-18G-26G5-100 from Maury Microwave is an Instrumentation Power Amplifier that operates from 18 to 26.5 GHz. It delivers a saturated output power of 100 W with a small signal gain of more than 51 dB. This amplifier is manufactured based on state-of-the-art GaN technology that exhibits high linearity for wideband communications testing purposes. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Low Noise Cryogenic Amplifier from 6 to 8.5 GHz | |
RF Amplifier
from AmpliTech
|
| The APTC3-06000850-2K00-D2-V from AmpliTech is a Low Noise Cryogenic Amplifier that operates from 6.0 to 8.5 GHz. It has been designed for cryogenic applications down to 4K, with an industry-low Noise Figure of 25K at +296K and 2K at 4K case temperatures across the band. It provides a more than 40 dB of gain with a noise figure of less than 0.029 dB (at 4 K) and has a P1dB of -6 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 9.18 GHz Combline Bandpass Filter | |
Band Pass Filter
from Quantic PMI (Planar Monolithics)
|
| The 5CL9D18G-180-CD-SFF from Quantic PMI is a Combline Band Pass Filter with a passband from 9.09 to 9.27 GHz. It has a passband insertion loss of less than 4.0 dB and provides more than 70 dBc of rejection below and 60 dBc of rejection above the passband. This BPF has a loss ripple of 0.5 dB and phase linearity of less than +/- 6º. It is available as a silver-plated module that measures 1.9 x 0.4 x 0.4 inch. |
| |
Download Datasheet
Product Details | |
|
|
|
| Radio Wave Biomass Absorbers Up to 110 GHz | |
Microwave Absorber
from TDK RF Solutions
|
| The IS-BP Series from TDK Corporation are Biomass Radio Wave Absorbers that have a frequency range of up to 110 GHz. They incorporate biomass IS materials that cover a wide frequency range from microwaves to millimeter waves and sub-millimeter waves, exhibiting excellent radiowave absorption performance. These absorbers utilize foamed polyethylene as a base material along with ohmic loss of carbon. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 4x4 Butler Matrix from 2.4 to 8 GHz for Multi-Channel MIMO Testing | |
Butler Matrix
from Ranatec
|
| The RI 3041 from Ranatec is a 4x4 Butler Matrix that operates from 2.4 to 8 GHz. It can be used to control a beamforming network by switching the direction of beams to the desired beam port. In transmit mode, it delivers the full power of the transmitter to the beam, and in receive mode, it collects the signal from each of the beam directions with the full gain of the antenna array. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Front End Module for GPS Applications | |
Front End Module
from NuWaves RF Solutions
|
| The NW-RF-GPS-FE from NuWaves is an RF Front End Module for GPS applications with a transmit (Tx) frequency from 1626.5 to 1675 MHz and a receive (Rx) frequency from 1518 to 1559 MHz. It delivers more than 20 W of saturated output power with a transmit gain of 43 dB and a receive gain of 47 dB. The module can handle up to 12 dBm of input power and operates on 27-32 VDC supply while consuming 3.25 A (typical) of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE Cat M1/NB2 Module for Global Operations | |
Cellular Module
from Telit Communications
|
| The ME310M1 from Telit is an LTE Cat M1/NB2 Module that covers LTE UE Cat M1 (1.4 MHz) and NB2 (200 kHz) bands. It delivers an uplink data rate of up to 1 Mbps (LTE Cat M1) & 160 Kbps (LTE Cat NB2) and a downlink data rate of up to 588 Kbps (LTE Cat M1) & 120 Kbps (LTE Cat NB2). This module has a global SKU with future support for non-terrestrial networks (NTN). |
| |
Download Datasheet
Product Details | |
|
|
|
| Rack-Mount, 16-Way Active GPS Splitter from 1.1 to 1.7 GHz | |
Power Divider
from GPS Networking
|
| The CRMALDCBS1X16 from GPS Networking is an Active 16-Way GPS Power Splitter that operates from 1.1 to 1.7 GHz. It has been designed to accept signals in the L-band, covering all major GNSS constellations, and provides multiple devices with the signal from a single antenna. In the standard configuration, the J1 port will pass DC voltage from a connected device and pass this power to the antenna or other devices upline from the splitter through the antenna port. |
| |
Download Datasheet
Product Details | |
|
|
|
| Integrated Tx/Rx Front-End Module for 3G/4G/5G Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58101-11 from Skyworks is a Front-End Module that covers 2G, 3G, 4G and 5G bands. It consists of a low-band 3G/4G/5G PA block, low-band and high-band 2G PA blocks, a silicon controller consisting of the MIPI RFFE interface, RF band switches, antenna switches, a bi-directional coupler, integrated filters for Bands 8, 12, 20, 26, 28A, and 29, and low noise amplifier (LNA). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2 W Microstrip Isolator from 34.5 to 35.6 GHz for Radar Applications | |
RF & Microwave Isolator
from JQL Electronics
|
| The JIS34K5T35K6G0C from JQL Technologies is a Microstrip Isolator that operates from 34.5 to 35.6 GHz. It can handle a CW input power of 2 W, provides more than 19 dB of isolation and has an insertion loss of less than 1.2 dB. This Ka-band isolator is extremely stable over the temperature range of -40°C to +70°C. It is available in a surface-mount package that measures 5.0 x 5.0 x 1.2 mm and is ideal for radar applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Chip, Multi-Band System-in-Package for 5G Massive IoT Platforms | |
Cellular Module
from Sequans Communications
|
| The Monarch 2 from Sequans Communications is a Multi-Chip, Multi-Band System-in-Package (SiP) that supports 5G massive IoT (LTE-M/NB-IoT) platforms. It is based on the 2nd generation of Sequans’ Monarch LTE Cat M1/NB1/NB2 chipsets and consists of an entire front-end, transceiver, power management, RAM memory, crystals, and baseband modem for an LTE multi-band radio operating from 699 to 2200 MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 GHz Fixed Wireless Subscriber Module for PMP and PTP Deployments | |
Microwave Backhaul Radio Links
from Cambium Networks
|
| The ePMP Force 4625 Series from Cambium Networks is a Fixed Wireless Subscriber Module that operates from 5925 to 7125 MHz. It supports channel bandwidths of 20, 40, 80 and 160 MHz, and has configurable channel spacing in 5 MHz increments. This module supports MCS 0 (BPSK) to MCS 11 (1024 QAM-5/6) modulation levels and meets the demand for high performance and low latency across both PMP and PTP deployments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Channel Software-Defined Radio from 30 to 2500 MHz for Military Applications | |
Software Defined Radio
from Collins Aerospace
|
| The TRUNET AN/PRC-162(V)1 from Collins Aerospace is a Dual-Channel Networking Radio. It operates from 30-88 MHz, 1188-137 MHz, 225-450 MHz, 1250-1450 MHz, and 1755-1850 MHz, with the capability to extend coverage up to 2500 MHz in 1.25 kHz steps.This radio is a versatile software-defined radio (SDR) receiver-transmitter for ground systems and is part of the TruNet networked communications solution family. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| RF Record and Playback System from 30 MHz to 26.5 GHz | |
RF Spectrum Recording and Playback System
from Spectra Lab
|
| The Model 3863 from Spectra Lab is an RF Record and Playback Instrument that can capture and reproduce RF signals from 30 MHz to 26.5 GHz. It features two RF channels that enable the simultaneous recording and playback of two RF input/output channels. This instrument has an instantaneous bandwidth (IBW) of 1 GHz and supports 1 GHz/channel continuous IQ streaming & 2 GHz/channel short-duration IQ capture/generation. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP-67 Rated Dual Band Active GNSS Antenna | |
GPS/GNSS Antenna
from Amphenol RF
|
| The ST0326-41-001-A from Amphenol RF is an Active GNSS Antenna that operates up to 1.61 GHz. This dual-band antenna supports GLONASS, GNSS and GPS constellations and can handle an input power of 2 W. It has an integrated LNA that makes this antenna ideal for applications where the receiver is close to the antenna and in environments where signal strength is strong, such as open areas with a clear line-of-sight. |
| |
Download Datasheet
Product Details | |
|
|
|
| GaAs Non-Reflective SPDT Switch MMIC from 26.5 to 40 GHz | |
Waveguide Switch
from Renaissance Electronics Corporation
|
| The HSWM22801-351 from Renaissance Electronics Corporation is a Non-Reflective SPDT Switch MMIC that operates from 26.5 to 40 GHz. It can handle an input power of up to 10 W (~40 dBm) and has an insertion loss of less than 3.1 dB. The switch supports TTL control, has a switching speed of 30 ns and provides more than 38 dB of isolation. |
| |
Download Datasheet
Product Details | |
|
|
|
| UHF RAIN RFID Tags from 865 to 928 MHz with Anti-Collision Technology | |
RFID Tag
from HID Global Corporation
|
| The IronTag from HID Global are RAIN RFID Tags that operate in the UHF Band from 865-868 MHz (ETSI) and 865-928 MHz (Global). They are based on Impinj’s Monza X chip that has a user memory of 8192 bits, an EPC memory of 128 bits, and a TID memory of 96 bits. These UHF transponders deliver excellent performance on metal surfaces, and are built to withstand vibration, shock, chemical exposure, and fluctuating temperatures. |
| |
Download Datasheet
Product Details | |
|
