| Featured Products this Week . |
|
|
| 67 GHz Flexible, Colour-Coded VNA Test Cable Assemblies | |
RF Cable Assembly
from Maury Microwave
|
| The StabilityVNA™ (SV-Series) from Maury Microwave are 67 GHz Test Port VNA Cable Assemblies. They offer excellent amplitude and phase stability with flexure, thereby improving measurement accuracy while reducing measurement uncertainty. These cable assemblies have excellent flexibility and anti-skid bands to ensure the cables can be arbitrarily positioned without spring-back or stress on DUTs. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Mini Air-Core Inductors from 2.5 to 62 nH | |
RF Inductor
from Coilcraft
|
| The 1512SP Series from Coilcraft are Air-core inductors with inductance values from 2.5 to 62.0 nH. They have DC resistances from 1.0 to 15.5 mOhm and offer percentage tolerances of 1, 5, 2 and 10 %. The inductors have a Q-factor of more than 80 and have self-resonant frequencies ranging from 1.8 to 14.0 GHz. They can handle rms currents of up to 2.7-11.1 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| True-RMS RF Power Sensor from 1 MHz to 18 GHz | |
RF Power Meter & Sensor
from LadyBug Technologies
|
| The LB5918A from LadyBug Technologies is a True-RMS Power Sensor that operates from 1 MHz to 18 GHz. It can measure a continuous average power from -60 dBm to +26 dBm and peak input pulsed power of up to 2 W. This power sensor utilizes a highly accurate, thermally-stabilized, two path, RMS responding, square law diode detection scheme that accurately conducts measurements of any signal regardless of its modulation bandwidth. |
| |
Download Datasheet
Product Details | |
|
|
|
| 750 W Solid-State High-Power Amplifier from 80 to 1000 MHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2071A-LC from Exodus Advanced Communications is a solid-state high-power amplifier that operates from 80 to 1000 MHz. This class A/AB linear amplifier provides over 750 Watts of saturated power (600 W P1dB) with a power gain of over 60 dB. This LDMOS amplifier features built-in protection circuits and is suitable for all single channel modulation standards. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Port USB Vector Network Analyzer from 100 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The C1209 is a two port computer-controlled vector network analyzer that operates from 100 kHz to 9 GHz. It has a dynamic range of 148 dB and output power range from -60 dBm to 15 dBm. The VNA can measure all four S-Parameters, has a measurement speed of 10 microseconds and can measure up to 500,001 points.This “half rack” vector network analyzer with dimensions of 16.75 x 9.25 x 3.8 inches (425 x 235 x 96 mm) and a weight of just over 12 lbs. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Coaxial TEM Single Loop Couplers from 1 to 8 GHz | |
Directional Coupler
from Scientific Microwave Corporation
|
| The SMC-073TEM Series from Scientific Microwave Corporation are TEM Single Loop Couplers that operate from 1 to 8 GHz. They are available in 30, 40, 50, and 60 dB coupling options, with a coupling accuracy of ± 1 dB and a directivity of 14 dB. These couplers are available as connectorized modules with various coaxial connector options, and they are also customizable as pressurized and TVAC units. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 W LDMOS + GaN Doherty Power Amplifier from 3.4 to 3.8 GHz | |
RF Amplifier
from NXP Semiconductors
|
| The A5M36TG140-TC from NXP Semiconductors is a Doherty Power Amplifier that operates from 3400 to 3800 MHz. This amplifier has been designed for wireless infrastructure applications that demand high performance in the smallest footprint. The amplifier is ideal for applications in massive MIMO systems, outdoor small cells, and low-power remote radio heads. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Wi-Fi 7 (802.11be) Front End Module | |
Front End Module
from Qorvo
|
| The QPF4239 from Qorvo is a Wi-Fi 7 (802.11be) Front-End Module (FEM) that operates from 2412 to 2484 MHz. It consists of a 2.4 GHz power amplifier (PA), single pole two throw switch (SP2T), and by-passable low noise amplifier (LNA). This FEM also has an RF output coupler and a broad-range, constant slope voltage logarithmic power detector for application feedback. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 dB Bi-Directional Coupler from 800 to 2500 MHz | |
Bi-Directional Coupler
from Innovative Power Products
|
| The IPP-8029 from Innovative Power Products is a Bi-Directional Coupler that operates from 800 to 2500 MHz. It provides 20 dB of coupling with a directivity of more than 20 dB and an insertion loss of less than 0.25 dB. The coupler can handle an input power of 150 W and has a VSWR of less than 1.25:1. It is available in a surface mount package that measures 25.40 x 12.70 x 1.55 mm with matte Tin or Nickel Gold finishes that are RoHS-compliant. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space-Qualified Double-Balanced Mixer MMIC from 18 to 46 GHz | |
RF Mixer
from Teledyne e2v HiRel Electronics
|
| The TDMX011037 from Teledyne e2v HiRel is a Double-Balanced Passive Diode Mixer MMIC with an RF/LO frequency from 18 to 46 GHz and an IF frequency from DC to 20 GHz. It is qualified for use in space environments and offers low conversion loss and high linearity. The mixer has a P1dB of 12 dBm and a conversion loss of 6.5 dB. It has an LO drive of 15 dBm and provides LO-RF isolation of 35 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 GHz Bias Tee with High Isolation | |
Bias Tee
from Atlantic Microwave
|
| The ABT Series of Bias Tees from AltanTecRF is a range of 3-port devices that operate up to 50 GHz. They can be used in transmission systems to deliver DC power and RF signal to amplifiers and frequency converters using only one coaxial cable. The Bias Tees have an insertion loss of under 4 dB, an isolation over 50 dB and a VSWR of 2.0:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Microminiature BMMA Connectors from DC to 28 GHz | |
RF Connector
from Delta Electronics Manufacturing Corp.
|
| The BMMA Series from Delta are Microminiature Connectors that operate from DC to 28 GHz. They are sub-miniature versions of the BMA connectors and have a blind mate connection interface. These connectors have a dielectric withstanding voltage of 675 V RMS, an insulation resistance of 5,000 megohms and a VSWR of 1.05. |
| |
Download Datasheet
Product Details | |
|
|
|
| Suspended Stripline High Pass Filter from 18 to 40 GHz | |
RF High Pass Filter
from Anatech Electronics
|
| The AE18000SSH6615 from Anatech Electronics is a Suspended Stripline High Pass Filter with a cutoff frequency of 18 GHz and a passband from 18 to 40 GHz. The filter has an insertion loss of less than 2 dB with a rejection of more than 50 dB at 15 GHz. It can handle an input power of up to 15 W. This high pass filter is available in a module that measures 12.7 x 12.7 x 10.0 mm with SMA female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Sine-Wave/CMOS VCXOs from 80 to 125 MHz | |
VCXO
from NEL Frequency Controls
|
| The AB-X32APXXX20-X Series from NEL Frequency Controls are Voltage Controlled Crystal Oscillators (VCXOs) that operate from 80 to 125 MHz. They provide extremely low phase noise and jitter with sine-wave or CMOS outputs. These oscillators have an SSB phase noise of -155 dBc/Hz@ 10 kHz offset and a G-sensitivity of 0.2 ppb/G. The oscillators have spurious levels of better than -80 dBc and harmonics of -30 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Band Active GNSS Antenna with RTK Support for cm-level Accuracy | |
GNSS Module
from Taoglas
|
| The EL20A from Taoglas is a Multi-Band Active GNSS Antenna solution that operates from 1200 to 1610 MHz. It combines a GNSS antenna, RF electronics, and u-blox ZED-F9P GNSS receiver to enable cm-level positioning. This solution is an energy-efficient platform that provides high-precision GNSS location for large scale, niche navigation, and autonomous applications in an off-the-shelf, compact form factor. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Real-Time Spectrum Analyzers from 9 kHz to 3.0 or 7.5 GHz | |
RF Spectrum Analyzer
from Tektronix, Inc.
|
| The RSA600A Series from Tektronix are Real-Time Laboratory Spectrum Analyzers that cover a frequency range of 9 kHz to 3.0 or 7.5 GHz. They have an acquisition bandwidth of 40 MHz and deliver a real-time IF acquisition data rate of 112 Ms/s (16-bit integer samples) with a sweep speed of up to 24.7 GHz/sec. These RTSAs have an attenuation range of 0 to 51 dB (in 1 dB steps) and a DANL of less than -164 dBm/Hz with 3rd Order Inter-modulation distortion level of -80 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 W V-Band TWTA for Satellite Uplink Applications | |
SATCOM Amplifier System
from Communications & Power Industries
|
| The TL02VO-A1 from Communications & Power Industries (CPI) is a Traveling Wave Tube Amplifier (TWTA) that operates in the V-band from 47.2 to 52.4 GHz. It delivers a TWT output power of 250 W and a flange output power of 200 W, with a gain of over 60 dB. Mounted at the antenna, it enhances performance by reducing IFL losses and cutting system design costs making it ideal for fixed earth station applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| UHF Short Range RFID Reader for Industrial Applications | |
RFID Reader
from IdTronic
|
| The BLUEBOX from iDtronic is a short-range RFID reader that operates at frequencies from 865 to 868 MHz (ETSI) and 902 to 928 MHz (FCC). It can read tags up to a distance of 3 meters and has an integrated antenna with a gain of 3.4 dBic. The reader can transmit up to 27 dBm (0.5 W) and operates on a DC supply of 10 to 36 V. |
| |
Download Datasheet
Product Details | |
|
|
|
| E-Band mmWave Radio Link from 71 - 76 GHz and 81 - 86 GHz | |
Microwave Backhaul Radio Links
from Vubiq
|
| The HaulPass E10G from Vubiq Networks is a Millimeter Wave Radio Link that operates in the E-Band from 71 to 76 GHz and 81 to 86 GHz. It has a programmable channel bandwidth from 100 MHz to 2 GHz (baud rate, coding, and modulation programmable) with a step size of 31.25 MHz. This radio link incorporates Vubiq Networks’ patented modular integrated waveguide technology and adaptive code modulation and baud (ACMB) technology that instantly sets code rate, modulation and baud in real time, resulting in a hitless adjustment to link conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Tri-Radio SoC Integrating Wi-Fi 6, Bluetooth 5.3 and IEEE 802.15.4 | |
Wireless Chipset
from Qualcomm
|
| The QCC740 from Qualcomm is a 2.4 GHz Tri-Radio SoC that integrates Wi-Fi 6, Bluetooth 5.3 and IEEE 802.15.4 (Zigbee and Thread) protocols. It has a 32-bit RISC-V 325 MHz microcontroller and is Bluetooth 5.3 qualified supporting dual mode (BR/EDR and LE with coded PHY) and 2.4 GHz Wi-Fi 802.11b/g/n/ax. This SoC operates in hostless mode and is capable of running both the protocol stack to the application level as well as IoT applications without requiring an external MCU. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| D-Band External Frequency Extension Frontend from 110 to 170 GHz | |
Signal Generator Extender
from Rohde & Schwarz
|
| The R&S FE170ST from Rohde & Schwarz is an External Frequency Extension Frontend with output frequency in the D-Band from 110 to 170 GHz. It can extend the frequency range of various test and measurement products such as the R&S FSW signal and spectrum analyzer, R&S RTP oscilloscope, R&S SMW200A, and R&S SMM100A vector signal generators for wideband signal generation and analysis. |
| |
Download Datasheet
Product Details | |
|
