| New Satellite & Space Products . |
|
|
|
|
|
|
|
| Electronically Scanned Array Antenna SATCOM Terminal from 17.7 to 31 GHz | |
Electronically Steerable Antenna
from ReQuTech AB
|
| The RESA L Ka from ReQuTech is an Electronically Scanned Phased Array Antenna Terminal that operates from 17.7 to 21.2 GHz (Rx) and 27.5 to 31 GHz (Tx). It features a fully integrated satellite terminal suitable for SATCOM-On-The-Move LEO/MEO/GEO communication. This lightweight terminal can be used either as a standalone product or in a mesh configuration with several RESA terminals. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Quad-Band PLL Low Noise Blocks from 17.2 to 21.2 GHz | |
Low Noise Block
from Norsat
|
| The 9000 Series from Norsat are a Quad-Band PLL Low Noise Blocks (LNB) that convert input RF frequencies from 17.2 to 21.2 GHz to output IF frequencies from 950 to 1950 MHz. They provide an output P1dB of more than +5 dBm and has LO frequencies of 16.25, 17.25, 18.25, and 19.25 GHz with a LO stability of ±10 kHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| C-Band Low Noise Block from 3.4 to 4.2 GHz | |
Low Noise Block
from Actox
|
| The ALS5X from Actox is a C-Band Low Noise Block that downconverts an input frequency of 3.4 to 4.2 GHz to an output frequency of 950 to 1750 MHz. It provides a conversion gain of 62 dB and has an output P1dB of more than +5 dBm. This LNB has a local oscillator frequency of 5.15 GHz and the option of an external reference. It has a stabilization and start-up time of less than 1 minute and a VSWR of less than 2.5:1 (input/output). |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact Block Up-Converter from 27.5 to 30/31 GHz | |
Block Up Converter
from Mission Microwave
|
| The Ka-Band Javelin from Mission Microwave is a Block Upconverter (BUC) that converts input frequencies from 950 to 2000 MHz to output frequencies from 27.5 to 30/31 GHz. It delivers an output power of up to 50 W (~47 dBm) with a gain of more than 60 dB and has a phase noise of -102 dBc/Hz (@1 MHz offset). This BUC has an inbuilt variable attenuator with an attenuation range of 31 dB, adjustable in steps of 0.25 dB. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Global MilSatCom 2024 | | |
|
|
|
|
|
|
|
| 200 W GaN-Based BUC/SSPA from 17.3 to 18.4 GHz | |
Block Up Converter
from TTI
|
| The GaN-DBS-SSPA-BUC-200W from TTI is a GaN SSPA/BUC that converts an input frequency of 950 MHz to 2050 MHz (IF) to an output frequency of 17.3 to 18.4 GHz (RF). It delivers a saturated output power of 53 dBm (~200 W) & a linear output power of 52 dBm (~158 W) with a gain of over 65 dB. This SSPA/BUC has a gain flatness of less than 4 dB p-p over the full band and a gain variation of ± 1.5 dB over the full operating range. |
| |
Download Datasheet
Product Details | |
|
|
|
| E-Band Waveguide Power Amplifier from 81 to 86 GHz | |
RF Amplifier
from Filtronic
|
| The Taurus 16 from Filtronic is a High-Power Amplifier (PA) that operates in the E-Band from 81 to 86 GHz. It delivers a saturated output power of 6.3 W (~38 dBm) with a small signal gain of 21 dB and has a bandwidth of 5 GHz. This amplifier includes two Cerus 8 E-Band amplifier modules, and each module contains eight Filtronic’s GaAs pHEMT PA MMICs. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ka-Band GaN MMIC Power Amplifier from 27.5 to 31.0 GHz | |
RF Amplifier
from Mitsubishi Electric US, Inc.
|
| The MGFGC5H3103 from Mitsubishi Electric is a Ka-Band GaN MMIC Power Amplifier that operates from 27.5 to 31.0 GHz. It delivers a saturated output power of 41.5 dBm (~14 W) with a gain of 20 dB. This amplifier supports various types of Ka-band satellite communication services, including satellite news gathering (SNG) and SATCOM emergency systems, in addition to the usual SATCOM applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Block Up Converter Power Amplifiers from 28.5 to 29.5 GHz | |
Block Up Converter
from EM Research
|
| The BUCPA Series from EM Research are Block Up Converter Power Amplifiers that convert input frequencies from 1 – 2 GHz to output frequencies (RF) from 28.5 – 29.5 GHz. They deliver an output power of 10 W (~40 dBm) with a gain of 62 dB. These converters have spurious levels of less than -60 dBc and phase noise of -77 dBc/Hz (at 1 kHz offset). |
| |
Download Datasheet
Product Details | |
|
|
|
| 5.5 W Two-stage GaN Power Amplifier from 27.5 to 31 GHz | |
RF Amplifier
from CML Microcircuits
|
| The CMX90A705 from CML Microcircuits is a Two-Stage GaN Power Amplifier that operates from 27.5 to 31 GHz. It delivers a saturated output power of 5.5 W (~37.4 dBm) with a small signal gain of 16.5 dB and PAE of 22%. This Ka-Band amplifier is fabricated using a state-of-the-art 0.15 µm gate length GaN-on-SiC process. It requires a DC supply of 22 to 28 V and consumes 860 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Purpose, Multi-Band VSAT Terminal from 13.75 to 31 GHz | |
SATCOM Terminal
from Orbit Communication Systems
|
| The MPT 87 from Orbit Communication Systems is a Multi-Purpose VSAT Terminal that operates in Ku-Band from 13.75-14.5 GHz (Tx)/10.95-12.75 GHz (Rx) and in the Ka-Band from 29-31 GHz (Tx)/19.2-21.2 GHz (Rx). It delivers high-quality broadband communications via satellite across a range of airborne platforms. This terminal provides excellent RF performance and dynamic response anytime and anywhere for military and government airborne SATCOM markets. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz Space-Qualified OCXO | |
OCXO
from Safran Electronics & Defense
|
| The MO from Safran is a Space-Qualified Oven Controlled Crystal Oscillator (OCXO) that operates at 10 MHz (frequencies from 5 to 15 MHz available on request). It provides an output signal level of 4.5 dBm with an SSB phase noise of -160 dBc/Hz at 10 kHz offset. This oscillator has a frequency stability of 1 ppb over a wide temperature range and a standard warm-up time of 20 minutes. It is ideal for SAR, FGU, MRO, and navigation applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space-Qualified OCXO from 130 to 400 MHz for LEO/MEO Applications | |
OCXO
from AXTAL
|
| The AXIOM75SHM from AXTAL is a Space COTS Oven-Controlled Crystal Oscillator (OCXO) that operates from 130 to 400 MHz. It provides a sinewave output waveforms with a phase noise of -150 dBc/Hz (at 1 kHz offset) and a frequency stability of ±50 ppb (vs. temperature). This space-qualified OCXO is manufactured according to MIL-PRF-55310 Level S requirements for high reliability and can withstand a total ionizing dose of 40 krad (Si). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| MMIC Low Noise Amplifier from 300 MHz to 4 GHz | |
RF Amplifier
from Teledyne e2v HiRel Electronics
|
| The TDLNA0840SEP from Teledyne e2v HiRel Electronics is a Low-Noise Amplifier (LNA) that operates from 0.3 to 4 GHz. It provides a gain of 29 dB with a noise figure of less than 1.5 dB. This unconditionally-stable LNA is developed on a 150 nm, enhancement mode, pHEMT process and is ideal for use in high-reliability applications where ultra-low power consumption, low noise figure, and small package footprint are critical. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 W V-Band TWTA for Satellite Uplink Applications | |
SATCOM Amplifier System
from Communications & Power Industries
|
| The TL02VO-A1 from Communications & Power Industries (CPI) is a Traveling Wave Tube Amplifier (TWTA) that operates in the V-band from 47.2 to 52.4 GHz. It delivers a TWT output power of 250 W and a flange output power of 200 W, with a gain of over 60 dB. Mounted at the antenna, it enhances performance by reducing IFL losses and cutting system design costs making it ideal for fixed earth station applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Radiation-Tolerant Space Data Link from 969 to 1206 MHz for LEO Operations | |
Data Link
from Collins Aerospace
|
| The SDL-1000 from Collins Aerospace is a Space Data Link that operates in the L-band from 969 to 1206 MHz. It supports Joint All Domain Command and Control (JADC2) requirements for real-time information exchange between Low-Earth Orbits (LEO) and the terrestrial domain in the connected battlespace. This data link supports the U.S. Space Development Agency’s (SDA) Tranche 1 Transport Layer (T1TL) program. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| X-Band Transmitter for Space Applications from 8.025 to 8.5 GHz | |
Software Defined Radio
from Space Micro
|
| The µXTx-200 from Space Micro is an X-Band Transmitter that operates from 8.025 to 8.5 GHz. It is designed to meet the demanding radiation requirements of long-term space missions and comes in ruggedized and radiation hardened design for launch and deployment feasibility. This transmitter has a channel bandwidth ranging from 100 Hz to 10 MHz and supports modulation schemes such as BPSK, QPSK, and OQPSK. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
