New RF and Microwave Products this Week . |
|
|
Powerfilm Chip Attenuators from DC to 8 GHz |
Fixed Attenuator
from Inmet by Spectrum Control
|
The PCAAF Series of fixed chip attenuators operate from DC to 8 GHz. These attenuators are available in a number of attenuation configurations from 0 to 20 dB. They consist of a laser trimmed distributed thin film element on an alumina ceramic substrate with a protective paint layer and solderable leads. The Attenuator has a proprietary thin film resistive element, alumina substrate and electroplated silver over nickel leads. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
Double-Ridge Waveguide Pressure Window from 2 to 4.8 GHz |
Waveguide Pressure Window
from Scientific Microwave Corporation
|
The SMC-060D200 from Scientific Microwave Corporation is a Double-Ridge Waveguide Pressure Window that operates from 2 to 4.8 GHz. It can handle a pressure of up to 40 Psi (Quartz) / 30 Psi (Kapton and Teflon) and has a VSWR of 1.15:1. This pressure window is available in a module with a WRD200 waveguide interface. |
|
Download Datasheet
Product Details | |
|
|
|
8-Channel 90 dB Digital Attenuator from 200 to 8000 MHz |
RF Variable Attenuator
from Vaunix
|
The LDA-908V-8 from Vaunix is an 8-Channel Digital Attenuator that operates from 200 to 8000 MHz. It has 8 independently controlled attenuation paths which provide an attenuation range of 90 dB in 0.1 dB steps (minimum) and has a switching speed of 15 µs. This attenuator can handle an input power +23 dBm and has an insertion loss of less than 8.5 dB. |
|
Download Datasheet
Product Details | |
|
|
|
Impedance-Matched Pick-Off Tee from DC to 110 GHz |
Pick off Tee
from SHF Communication Technologies
|
The SHF POT110 A from SHF Communication Technologies is an Impedance-Matched Pick-Off Tee that operates from DC to 110 GHz. It provides a pick-off coupling of 12 dB and has a thru-line insertion loss of 4 dB. This resistive pick-off tee can handle a maximum input power of 0.5 W and has a return loss of more than 8 dB. |
|
Download Datasheet
Product Details | |
|
|
Sponsored by DigiKey | Design your own RF cable assembly | The RF Cable Assembly Builder from Molex enables you to build an RF cable assembly to your exact requirements. Choose from a variety of connector and cable types, add any special requirements, and receive a concept drawing and 3D model instantly. Click here to learn more. | | | |
|
|
Wire-Wound Ferrite Core Chip Inductors up to 200 nH |
RF Inductor
from Coilcraft
|
The 0201AF Series from Coilcraft are Wire-Wound Ferrite Core Chip Inductors with inductance values of up to 200 nH. They are optimized for RF isolation in applications ranging from 900 MHz to 9 GHz. The inductors have a low-loss ferrite construction that ensures high impedance, high current handling capability, and low dynamic contact resistance (DCR) in a single package. |
|
Download Datasheet
Product Details | |
|
|
|
1000 W Solid-State Power Amplifier from 1 to 2.5 GHz |
RF Amplifier
from Exodus Advanced Communications
|
The AMP2082LC from Exodus Advanced Communication is a Solid-State Power Amplifier that operates from 1 to 2.5 GHz. It delivers a saturated output power of more than 1000 W with a power gain of over 60 dB. The amplifier has a Class A/AB linear design and uses high-power advanced devices that provide high efficiency with excellent reliability and ruggedness. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Fixed Attenuator from DC to 26.5 GHz |
Fixed Attenuator
from MECA
|
The 667-dB-1 from MECA is a Fixed Attenuator that operates from DC to 26.5 GHz. It is available in attenuation values of 3, 6, 10, 20, or 30 dB and has a VSWR of less than 1.4:1. The attenuator can handle an average power of 2 W and peak power of up to 250 W. It is matched to 50 ohms at input and output ports. |
|
Download Datasheet
Product Details | |
|
|
|
Sub-Octave Switch Filter Bank from 2 MHz to 8 GHz |
Switched Filter Bank
from ATEK MIDAS
|
The ATEK950P6 from ATEK MIDAS is a Sub-Octave Switch Filter Bank that operates from 2 to 8000 MHz. It consists of an SP8T switch followed by 7 fixed frequency bandpass filters which are followed by another SP8T switch. Each SP8T switch is used to send the input/output signals to 2 pins. This allows users to bypass the filter bank off-chip. |
|
Download Datasheet
Product Details | |
|
|
|
20 dB Surface Mount Directional Coupler from 8 to 12 GHz |
Directional Coupler
from TTM Technologies
|
The XMC0812F1-20G from TTM Technologies is a Directional Coupler that operates from 8 to 12 GHz. This 20 dB coupler has a directivity of more than 20 dB and an insertion loss of less than 0.50 dB. It can handle an average power of 50 W with a VSWR of 1.22:1 and a peak to average ratio of 12 dB. It is available in a surface mount package that measures 0.2 x 0.125 x 0.24 inches and has operating range of temperature between -55 to 150 Degree C. |
|
Download Datasheet
Product Details | |
|
|
|
|
Rack-Mount Shield Test Box from 20 MHz to 12 GHz |
RF Shielded Test Enclosure
from RF Electronics
|
The HDRF-17U3232-A from RF Electronics is a Shielded Test Box that operates from 20 MHz to 12 GHz. It is designed and developed for WLAN (802.11a/b/g/n/ac/ax/be) and wireless device testing (Bluetooth, RFID, 3G, 5G FR1). This test box has an internal clear space dimension of 711 x 761 x 716 mm and includes thick RF-absorbing foam material that deadens standing waves and reflections. |
|
Download Datasheet
Product Details | |
|
|
|
1.0 mm OSLT Calibration Kit from DC to 116.5 GHz |
VNA Calibration Kit
from Spinner Group
|
The BN 535742 from Spinner Group is an OSLT Calibration Kit with 1.0 mm plug and socket connectors that operates from DC to 116.5 GHz (resonance free up to 120 GHz). This kit consists of a 1.0 mm open-circuit plug, 1.0 mm open circuit socket, 1.0 mm short circuit plug, 1.0 mm short circuit socket, 1.0 mm load plug, 1.0 mm load socket, 1.0 mm through plug/plug, 1.0 mm through socket/socket, 1.0 mm through plug/socket, torque wrench 6 mm/45 N-cm, torque wrench 6 mm/34 N-cm, and a double open-ended spanner (7 mm). |
|
Download Datasheet
Product Details | |
|
|
|
2.4/5 GHz Wi-Fi 6 Companion IC for IoT Applications |
Wireless Chipset
from Nordic Semiconductor
|
The nRF7002 from Nordic Semiconductor is a 2.4/5 GHz Wi-Fi 6 Companion IC for low-power and secure IoT applications. It is designed to provide seamless Wi-Fi connectivity and Wi-Fi-based location (SSID sniffing of local Wi-Fi hubs) alongside Nordic’s existing products. This IC has 1 spatial stream (SS) and a channel bandwidth of 20 MHz. |
|
Download Datasheet
Product Details | |
|
|
|
2.4 GHz RF Front-End IC for Bluetooth Applications |
Front End Module
from CoreHW
|
The CHW3021 from CoreHW is an RF Front-End (RFFE) IC that operates in the 2.4 GHz ISM Band. It consists of a power amplifier (PA), a low noise amplifier (LNA), an antenna switch, and a built-in chip antenna. The antenna can be swapped to enhance the performance of various wireless devices. On the Tx side, it delivers an output power of 10 to 13 dBm while on the Rx side, it provides a gain of 15 dB and has a noise figure of 1.9 dB. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
5G Surface Mount Antenna from 698 to 3800 MHz |
Antenna
from Quectel
|
The YC0017DA from Quectel is a 5G Surface Mount Antenna that operates from 698 to 3800 MHz. This linearly-polarized antenna provides a peak gain of up to 4.1 dBi with an efficiency of 67% and has a VSWR of less than 6.4:1. It is designed to cover 5G NR sub-6 GHz bands and is also compatible with 2G, 3G, 4G, and LPWA frequency bands. |
|
Download Datasheet
Product Details | |
|
|
|
Low Noise Amplifier from 10 kHz to 22 GHz |
RF Amplifier
from Analog Devices
|
The ADL8101 from Analog Devices is a Low Noise Amplifier (LNA) that operates from 10 kHz to 22 GHz. It delivers 14 dB of gain with a noise figure of up to 3.8 dB and has a saturated output power of up to 18 dBm. This LNA has a power-added efficiency of up to 8.66% and a return loss of 10-17 dB. It is fabricated on a pseudomorphic high electron mobility transistor (pHEMT) process and has a resistor programmable bias setting. |
|
Download Datasheet
Product Details | |
|
|
|
Low Noise Amplifier from 10 MHz to 20 GHz |
RF Amplifier
from Quantic PMI (Planar Monolithics)
|
The PEC-30-10M20-SFF from Quantic PMI (Planar Monolithics) is a Low Noise Amplifier (LNA) that operates from 10 MHz to 20 GHz. It provides 26 dB of gain with a noise figure of less than 4.5 dB and has an output P1dB of 13.5 dBm. This LNA requires a DC supply from 12 to 15 V and consumes less than 120 mA of current. |
|
Download Datasheet
Product Details | |
|
|
|
20 W GaN Power Amplifier from 2 to 6 GHz |
RF Amplifier
from RFHIC
|
The RUM43020-10 from RFHIC is a Power Amplifier that operates from 2 to 6 GHz. It delivers a saturated output power of 20 W with a gain of 35 dB and power added efficiency of 20%. It is designed using RFHIC’s GaN on SiC high-electron-mobility (HEMT) on aluminum sub-carrier technology to provide high breakdown voltage, efficiency, and lower thermal dissipation. |
|
Download Datasheet
Product Details | |
|
|
|
64T64R MIMO 5G Backhaul Radio from 3.55 to 3.7 GHz |
Microwave Backhaul Radio Links
from AGTGSS
|
The 64TR mMIMO from AmpliTech Group True G Speed Services (AGTGSS) is a Backhaul Radio that operates from 3.55 to 3.7 GHz. It has a bandwidth of up to 100 MHz and supports QPSK and 16/64/256 QAM modulation schemes. This radio supports TDD duplex mode and 64T64R MIMO. It is a “plug-n-play” solution for P5G and local carriers and offers benefits such as rapid deployment, flexibility, cost-effectiveness, localized high-speed connectivity, enhanced security, and interoperability. |
|
Download Datasheet
Product Details | |
|
|
|
C-Band Low Noise Block from 3.4 to 4.2 GHz |
Low Noise Block
from Actox
|
The ALS5X from Actox is a C-Band Low Noise Block that downconverts an input frequency of 3.4 to 4.2 GHz to an output frequency of 950 to 1750 MHz. It provides a conversion gain of 62 dB and has an output P1dB of more than +5 dBm. This LNB has a local oscillator frequency of 5.15 GHz and the option of an external reference. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Space-Qualified OCXO from 130 to 400 MHz for LEO/MEO Applications |
OCXO
from AXTAL
|
The AXIOM75SHM from AXTAL is a Space COTS Oven-Controlled Crystal Oscillator (OCXO) that operates from 130 to 400 MHz. It provides a sinewave output waveforms with a phase noise of -150 dBc/Hz (at 1 kHz offset) and a frequency stability of ±50 ppb (vs. temperature). This space-qualified OCXO is manufactured according to MIL-PRF-55310 Level S requirements for high reliability and can withstand a total ionizing dose of 40 krad (Si). |
|
Download Datasheet
Product Details | |
|
|
|
|
|