| New RF and Microwave Products this Week . |
|
|
| 27 GHz Low-Profile Flexible Microwave Cable Assembly | |
RF Cable Assembly
from Times Microwave Systems
|
| The InstaBend® IB-141 from Times Microwave Systems is a Flexible Microwave Cable Assembly that operates up to 27 GHz. This 50-ohm cable assembly is available in varying lengths and connector options and can be bent very closely behind the connector to simplify cable routing. It is ideal for both inside-the-box and between-box connections in applications including space flight, thermal vacuum, microwave tests, and many other commercial and military applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Up-Down Converter and Beamformer for 5G mmWave Applications | |
RF Up-down Converter
from Analog Devices
|
| The ADMV1239 from Analog Devices is an Up-Down Converter and Beamformer that operates from 37 to 43.5 GHz. It integrates a 16 (2x8) channel beamformer paired with a 2 transmit (TX) and 2 receive (RX) channel upconverter/downconverter (UDC). This RFIC has on-chip transmit-receive switches that connect the upconverter RF output and downconverter RF input for each polarization into eight independent channels via the 1x8 power splitters/combiners. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.92mm RF Termination from DC to 40 GHz | |
Termination
from Inmet by Spectrum Control
|
| The TS400HM from Inmet by Spectrum Control is a 50 Ohm Termination that operates from DC to 40 GHz. It can handle an average input power of 1 W with a VSWR of less than 1.20:1. This termination has a passivated stainless steel hexagonal body that measures (dia) 7.93 x (L) 14.70 mm and has a 2.92 mm male connector with a Gold plated Beryllium Copper contact. |
| |
Download Datasheet
Product Details | |
|
|
|
| Broadband RF Termination from DC to 110 GHz | |
Termination
from HYPERLABS
|
| The HL9529 from Hyperlabs is an RF Termination that operates from DC to 110 GHz. It can handle an input power of up to 24 dBm, has a rise time of 3 ps, and a return loss of 15 dB (DC to 90 GHz). This 50-ohm termination is available in a module that measures 0.737 x 0.377 x 0.377 inches with 1.0 mm connectors and has an operating temperature range of -40 to +50°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8 to 12 GHz Surface Mount Band Pass Filter | |
Band Pass Filter
from Knowles
|
| The B096QC2S from Knowles is a surface mount, fully shielded, thin film filter with a passband from 8 to 12 GHz. It has been designed for use on PCB 8-12 mils thick with permitivity of 3-3.8. The filter has an insertion loss under 3 dB, a VSWR of 2:1 and rejection of 40 dB across the band. It can be used for X-Band, Radar and Military Communications. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by SV Microwave | | Threaded SMPM RF Cable Assemblies | | Amphenol SV Microwave's Threaded SMPM Cable Assemblies feature a standard SMPM RF interface and threaded coupling nut to ensure low mating and de-mating force. Designed for high-vibration settings, they support Ø.047" and Ø.085" cables and operate up to 18 GHz, ideal for Mil/Aero applications. Click here to learn more | | | |
|
|
| 3-Stage GaN Power Amplifier MMIC from 24 to 27.5 GHz | |
RF Amplifier
from United Monolithic Semiconductors
|
| The CHA6682-98F from United Monolithic Semiconductors is a 3-Stage GaN Power Amplifier MMIC that operates from 24 to 27.5 GHz. It delivers a saturated output power of 5 W (37 dBm) with a gain of 25 dB and a power-added efficiency of 32%. This amplifier has a return loss of -7 dB (input) and -10 dB (output). It is manufactured on a robust GaN on SiC HEMT process and has an output power detector & integrated ESD RF protection circuitry. |
| |
Download Datasheet
Product Details | |
|
|
|
| 160 W GaN-on-SiC Power Amplifier from 20 to 800 MHz | |
RF Amplifier
from RFHIC
|
| The RWP03160-2R from RFHIC is a GaN-on-SiC Power Amplifier that operates from 20 to 800 MHz. It delivers a saturated output power of 160 W with a small signal gain of 44 dB and an efficiency of 53.13%. This amplifier is fabricated using GaN-on-SiC technology that is attached to an Aluminum sub-carrier. It is fully matched for broadband performance and offers good thermal handling capabilities based on a patented technology. |
| |
Download Datasheet
Product Details | |
|
|
|
| 750 W Solid-State Signal Source for RF Energy Applications from 902 to 928 MHz | |
Microwave Generator
from Mini Circuits
|
| The RFS-G90G93750X+ from Mini-Circuits is a Programmable Solid-State Signal Source that operates in the ISM Band from 902 to 928 MHz. This signal source provides an output power (CW and Pulse) from 2 to 750 W. It consists of a signal generator and a high-power amplifier in a single unit. This signal source can also be configured to operate as a standalone high-power amplifier that delivers an output power of 750 W(~58.75 dBm) with a gain of 59 dB and an efficiency of 63%. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 to 4 GHz, 360 Degree, SMA USB Phase Shifter | |
Digital Phase Shifter
from Vaunix
|
| The LPS-402 is a USB Phase Shifter that operates from 2 to 4 GHz. It has a 360-degree phase control range with one-degree increments and stores settings in internal memory, allowing it to power up in a specific phase state. The phase can be set from the easy to install and use GUI, configured from an uploaded phase profile or programmed using the provided API DLL. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged RF Shield Box from 20 MHz to 6 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-2270-C from RF Electronics is an RF Shield Box that is designed and developed for WLAN and Wireless Device (Bluetooth, RFID) Testing from 20 MHz to 6 GHz. It has thick RF absorbing that deadens standing waves and reflections and provides over 90 dB of isolation for accurate performance. The box is equipped with shielded power filters for making power connections in the box while still blocking all wireless signals. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by SV Microwave | | |
|
|
| Single-Channel Direction Finding Antenna from 20 MHz to 8.5 GHz | |
Direction Finding Antenna
from Rohde & Schwarz
|
| The R&S ADD597 from Rohde & Schwarz is a Single-Channel Direction-finding (DF) Antenna that operates from 20 MHz to 7.5 GHz with horizontal polarization and up to 8.5 GHz with vertical polarization. This antenna offers dual-polarization capability and has multi-element antenna arrays with superior DF accuracy and immunity to reflections. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2/4-Ports Vector Network Analyzers from 70 kHz to 220 GHz | |
Vector Network Analyzer
from Anritsu
|
| The VectorStar ME7838x4 Series from Anritsu are 4-Port Vector Network Analyzers (VNAs) that operate from 70 kHz to 220 GHz. These VNAs offer a new level of performance for device modeling engineers struggling to accurately and reliably characterize their devices and for R&D engineers pushing the last traction of a dB out of their state-of-the-art designs. |
| |
Download Datasheet
Product Details | |
|
|
|
| 18 dB Cryogenic Isolator from 10 to 18 GHz | |
RF & Microwave Isolator
from Low Noise Factory
|
| The LNF-ISC10_18A from Low Noise Factory is a Cryogenic Isolator that operates from 10 to 18 GHz. It provides an isolation of 18 dB and has an insertion loss of 0.3 dB. This single-junction isolator can handle an input power of up to 1 W (~30 dBm) and operates at a temperature range from 0.01 K to 100 K. The LNF-ISC10_18A has been designed to meet the strict requirements of ultra-low temperature physics research and has a gold-plated OFHC copper body to which ensures minimum loss. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Wi-Fi 7 (802.11be) Front End Module | |
Front End Module
from Qorvo
|
| The QPF4207 from Qorvo is a Wi-Fi 7 (802.11be) Front-End Module (FEM) that operates from 2412 to 2484 MHz. It consists of a 2.4 GHz power amplifier, SP2T switch, and a bypassable multimode low noise amplifier (LNA). This FEM also has an RF output coupler, a broad-range constant slope voltage logarithmic power detector for precise power control, and digital pre-distortion (DPD) for enhanced linear output power and throughput. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE Cat 1 Modules for M2M and IoT Applications | |
Cellular Module
from Quectel
|
| The EC21 Series from Quectel are LTE Cat 1 Modules that are designed to support global LTE, UMTS/HSPA (+), and GSM/GPRS/EDGE coverage. They are suitable for IoT applications that are not reliant on high-speed connectivity but still require the longevity and reliability of LTE networks. These modules incorporate Qualcomm’s IZat location technology Gen8C Lite with multi-constellation GNSS connectivity, which greatly simplifies the product design and provides quicker, more accurate, and dependable positioning service. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface Mount Gain Block from 0.04 to 2.0 GHz | |
RF Amplifier
from Guerrilla RF
|
| The GRF9461 from Guerrilla RF is Gain Block that operates from 0.04 to 2.0 GHz. It provides a gain of 19.8 dB with a noise figure of 1.8 dB and an output P1dB of 18.80 dBm. This amplifier is based on a GaAs pHEMT process, and it is designed for use in 75 ohm CATV and 50 ohm general purpose applications. It requires a DC supply of 5 V and consumes 132 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Right-Angle Waveguide-to-Coaxial Adapter from 26.5 to 40 GHz | |
Waveguide to Coax Adapter
from Spacek Labs
|
| The T28-K from Spacek Labs is a 90° Waveguide-to-Coaxial Adapter that operates in the Ka-Band from 26.5 to 40 GHz. It can be used to adapt a component or system from a WR-28 (UG599/U) waveguide interface to the 2.92mm (K) coaxial connector and vice versa. This adapter has an insertion loss of 0.3 dB and a VSWR less than 1.35:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| EMI Patches for Blocking Electric/Magnetic Fields from 100 Hz to 25 GHz | |
Microwave Absorber
from Wurth Elektronik
|
| The WE-EMIP EMI Patch from Wurth Elektronik are EMI Patches that operate from 100 Hz to 25 GHz. These EMI patches offer a universal solution with a more comprehensive operating frequency range and higher attenuation capability than conventional absorber sheets. They are supported by a hybrid material containing both absorber and metal layers (Aluminum) that can effectively block electric and magnetic fields. |
| |
Download Datasheet
Product Details | |
|
|
|
| Cat-M/NB-IoT/Cellular PCB Mount Antenna from 698 to 2700 MHz | |
Antenna
from TE Connectivity
|
| The 2118614-1 from TE Connectivity is a PCB Mount Antenna that operates from 698 to 960 MHz, 1710 to 2170 MHz, and 2300 to 2700 MHz. This vertically polarized omnidirectional antenna provides a gain of up to 2.48 dB and has a VSWR of less than 2.50:1. It has been designed to support Cat-M, NB-IoT, Cellular, and ISM standards. This multi-band antenna is available in a surface-mount package that measures 20 x 50 x 1.64 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Double Ridged Horn Antenna from 5 to 32 GHz | |
Horn Antenna
from RF SPIN
|
| The DRH0532 from RF Spin is a Double Ridged Horn Antenna that operates from 5 to 32 GHz. This linearly polarized antenna has an antenna factor from 36 to 41 dB/m and delivers a CW power of 100 W. It provides a peak power of 170 W with a VSWR of 1.50:1. The DRH0532 is manufactured with RF SPIN’s SPM Technology to achieve exceptional mechanical and radio parameters. |
| |
Download Datasheet
Product Details | |
|
|
|
| Horn Antennas from 1.7 to 33 GHz | |
Horn Antenna
from Pasternack Enterprises Inc
|
| The PE1WAN Series from Pasternack are Pre-Built Horn Antenna Assemblies that operate from 1.7 to 33 GHz. They provide a gain of 10, 15, or 20 dBi and have a VSWR of 1.30:1. These linearly polarized gain horn assemblies can handle a peak input power of 20 to 500 W and have a half-power beam width of 31 or 52.1 degrees (horizontal) & 32 or 51.6 degrees (vertical). |
| |
Download Datasheet
Product Details | |
|
|
|
| Embedded Flexible PCB Antenna from 617 to 6000 MHz | |
Antenna
from Airgain
|
| The F56NBAAA from Airgain is an Embedded Flexible PCB Antenna that operates from 617 to 960 MHz and 1700 to 6000 MHz supporting global 2G, 3G, 4G and 5G cellular networks. It delivers a peak gain of up to 6.9 dBi and has an efficiency of over 60% across all frequency bands. This antenna can handle 30 dBm of power and has a VSWR of less than 2.5:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12-Port Multi-Beam Base Station Antenna from 698 to 960 MHz | |
Base Station Antenna
from MatSing
|
| The MS-MBA-3-L4A2 from MatSing is a 12-port Multi-Beam Base Station Lens Antenna that operates from 698 – 960 MHz (L-band). It is based on MatSing’s patented spherical lens technology that supports 3-isolated low-frequency, cross-polarized beams. This dual-slant ±45° polarized antenna provides a gain of 18 dBi with a horizontal beamwidth of 24° and vertical beamwidth of 15° each. |
| |
Download Datasheet
Product Details | |
|
