| Trending 4G/5G Products . |
|
|
| RF Front-End SP4T Switch from 600 to 6000 MHz | |
RF Switch
from Qorvo
|
| The QPC8020Q from Qorvo is an SP4T Switch that operates from 600 to 6000 MHz. It has a switching speed of less than 4 us and provides more than 16.5 dB of isolation. This SP4T switch can handle an input power of up to 39 dBm (~8 W) with a VSWR of less than 2.8:1. It requires a supply voltage of 1.8 V and consumes 55 uA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from 0.4 to 3.0 GHz | |
RF Amplifier
from Tagore Technology
|
| The TL0374J from Tagore Technology is a Low Noise Amplifier that operates from 0.4 to 3.0 GHz. It provides a gain of 21.5 dB with a noise figure of 0.35 dB and has an output P1dB of 18.5 dBm. This amplifier requires a supply voltage of 5 V and consumes 60 mA of current. The TL0374J is available in an 8-pin QFN package that measures 2 x 2 x 0.75 mm and is ideal for 4G/5G infrastructure radios, small cell and cellular repeaters, phase array radars, and SDARS applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Integrated RF Front-End Module for 3G, 4G, and 5G Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58105-31 from Skyworks Solutions is a Front-End Module (FEM) that is designed for 3G, 4G, and 5G mobile devices. This module consists of separate 3G/4G/G power amplifier (PA) blocks operating in mid-bands (MB) and high-bands (HB), a silicon controller with MIPI RFFE interface, RF-band switches, bidirectional couplers, MB/HB antenna switches, and integrated filters for bands 1, 3, 34, 39, 40, and 41. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4 W GaAs Surface Mount Power Amplifier from 2.1 to 2.2 GHz | |
RF Amplifier
from iCana
|
| The ARQSP2122-4 from iCana is a Power Amplifier that operates from 2110 to 2170 MHz. It delivers a saturated output power of 36.2 dBm with a power gain of 38 dB and a PAE of 32 %. This DPD-friendly power amplifier utilizes GaAs technology and is designed for 5G-NR FR1 n1 band wireless infrastructure applications. It requires a DC supply of 5 V and has a ACLR of less than -50 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 24 GHz n258 Band 5G Band Pass Filter | |
Band Pass Filter
from Knowles
|
| The 943504 from Knowles is a 5G Bandpass Filter with a passband from 23.80 to 24.20 GHz and a center frequency of 24 GHz. It has a passband insertion loss of 2.6 dB and has a quality factor of 59.672. This bandpass filter is available as a module that measures 51.31 x 12.70 x 10.80 mm and comes with SMA or K-Type field replaceable connector options. |
| |
Download Datasheet
Product Details | |
|
|
| Featured eBook - Download Now! | | |
|
|
| 5G Cavity Bandpass Filter with Passband from 37.7 to 43.5 GHz | |
Band Pass Filter
from Mini Circuits
|
| The ZVBP-40600-K1+ from Mini-Circuits is a Cavity Bandpass Filter with a passband from 37.7 to 43.5 GHz. It has a passband insertion loss of 1.8 dB and provides an out-of-band rejection of 88 dB (lower-band) and 79 dB (upper-band). This filter is designed by implementing resonant structures with very high Q-factor and narrow-band selectivity. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable RF Shield Test Box from 20 MHz to 12 GHz for 5G/Wi-Fi 7 Testing | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-7170 from RF Electronics is a Portable RF Shield Test Box that is designed for the frequency range from 20 MHz to 12 GHz. It has thick RF-absorbing foam that deadens standing waves and reflections. The test box has shielded power filters for powering devices placed inside the box while blocking all wireless signals. It is designed and developed for WLAN, and wireless device testing. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G Surface Mount Antenna from 698 to 3800 MHz | |
Antenna
from Quectel
|
| The YC0017DA from Quectel is a 5G Surface Mount Antenna that operates from 698 to 3800 MHz. This linearly-polarized antenna provides a peak gain of up to 4.1 dBi with an efficiency of 67% and has a VSWR of less than 6.4:1. It is designed to cover 5G NR sub-6 GHz bands and is also compatible with 2G, 3G, 4G, and LPWA frequency bands. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wireless Connectivity Test Platform from 380 MHz to 15 GHz | |
RF Test Set
from Keysight Technologies
|
| The E7515P UXM Wireless Connectivity Test Platform from Keysight Technologies operates from 380 MHz to 15 GHz. It has a highly integrated signalling tester with multiformat stack support, rich processing power, and abundant RF resources. This test set supports the latest 3GPP Release 15 and beyond, thereby enabling users to establish a 5G call with a device under test (DUT) in non-standalone (NSA) mode, standalone mode (SA) mode, and frequency bands FR1/FR2. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| RF Over Fiber 5G - DAS Extension System from 0.5 to 6000 MHz | |
RF Over Fiber Module
from RFOptic
|
| The RFoF-6GHz from RFOptic is an RF Over Fiber 5G - DAS extension system that operates from 0.5 to 6000 MHz. It has been developed to overcome the loss caused by coaxial infrastructure in terms of EVM and ACLR over a wide range of signal levels over long distances. The 5G system consists of an outdoor enclosure which is situated on the roof close to the antenna and an indoor unit connected by optical fibers. |
| |
Download Datasheet
Product Details | |
|
|
|
| Remote Spectrum Monitors from 9 kHz to 54 GHz | |
RF Monitoring Receiver
from Anritsu
|
| The MS2720xA from Anritsu are Remote Spectrum Monitors that operate from 9 kHz to 9/14/20/26.5/32/43.5/54 GHz. They use the latest technologies to deliver accuracy and precision in measurements previously reserved only for benchtop instruments. These modules consist of a real-time spectrum analyzer (RTSA) that has a measurement bandwidth of 110 MHz and a point of intercept (POI) time of 2.05µs. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4 Channel System-in-Package Phased Array Module for 5G NR n257 Band | |
Beamforming IC
from ED2 Corp
|
| The ED2-0023 from ED2 Corp is a 4-Channel System-in-Package (SiP) Phased Array Module (PAM) that operates at 28 GHz in the 5G NR n257-Band. It consists of 2x2 radiating elements with the Renesas F5288 beamforming half-duplex transceiver. On the Tx side, this PAM delivers an output power of 14.5 dBm with a gain from 42-47.5 dB, while on the Rx side, it provides a gain of 18 dB and has a noise figure of 4.9 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Weatherproof Multi-Band LTE Antenna from 450 to 2700 MHz | |
Antenna
from Antenna Company
|
| The AC94541-01N from Antenna Company is a Multi-Band LTE Antenna that operates from 450-470 MHz, 700-960 MHz, and 1700-2700 MHz. This quasi-omnidirectional antenna provides a peak gain of up to 5.1 dBi with an efficiency of 93%. It can handle an input power of up to 45 W and has a VSWR of 1.50:1. This linearly polarized antenna is designed to ease up the installation process and offers versatile mounting that simplifies inventory management. |
| |
Download Datasheet
Product Details | |
|
|
|
| High Gain e-pHEMT GaAs Low Noise Amplifier from 2 to 7 GHz | |
RF Amplifier
from BeRex, Inc.
|
| The BLB28 from BeRex is a High-Gain Low Noise Amplifier that operates from 2 to 7 GHz. It delivers 21.5 dB of gain with a noise figure of less than 1 dB and has an output P1dB of 19.6 dBm. This amplifier has an output IP3 of 31.5 dBm and an input return loss of 10 dB. It is based on a GaAs E-pHEMT process and is designed for applications requiring low noise and high gain. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G Antenna Module from 26.5 to 29.5 GHz with Built-in Front-End Module | |
Front End Module
from Doosan Corporation Electro-Materials
|
| The DS-MV_28 from Doosan Corporation is a 5G Antenna Module that operates from 26.5 to 29.5 GHz. This dual polarized (horizontally/vertically) antenna module has an EIRP of 38 dBm and an azimuth/elevation beam scan range of ±60°. It provides 48 dB of gain in Tx mode and 42 dB of gain in Rx mode. The antenna module incorporates an RF front-end module that has a 32-array antenna and beamforming IC. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Profile 5G/LTE Antenna from 698 to 3800 MHz | |
Antenna
from Maxtena
|
| The MEA-698-3800-SM from Maxtena is a 5G/LTE Antenna that operates from 698 to 3800 MHz. This vertically-polarized antenna provides a gain of 2 dBi and has a VSWR of less than 2.5:1. It provides multiple input multiple output (MIMO) functionality for 2G, 3G, 4G, and 5G communications. This omni-directional, low-profile antenna delivers industry-leading wideband performance and optimal coverage. |
| |
Download Datasheet
Product Details | |
|
|
|
| 25 GHz mmWave Flex-to-Board PCB Headers for 5G Applications | |
RF Connector
from MOLEX
|
| The 2188770062 from Molex are mmWave Flex-to-Board PCB Headers that have been designed to support frequency signals up to 25 GHz. They can handle a current of up to 1.0 A per contact and has a dielectric withstanding voltage of 250 V (AC). These board connectors can withstand up to 10 mating cycles and enable the high-speed transfer of RF signals while offering space savings and mechanical robustness. |
| |
Download Datasheet
Product Details | |
|
