| Trending T&M Products . |
|
|
| Handheld Real-Time Spectrum Analyzers from 9 kHz to 9.5/20 GHz | |
RF Spectrum Analyzer
from HAROGIC Technologies
|
| The PXE Series from HAROGIC Technologies are Handheld Real-Time Spectrum Analyzers (RTSAs) that operate from 9 kHz to 9.5/20 GHz. These spectrum analyzers operate in standard sweep, detection analysis/zero span, and real-time spectrum analysis mode. They implement an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames. |
| |
Download Datasheet
Product Details | |
|
|
|
| True-RMS RF Power Sensor from 9 kHz to 54 GHz | |
RF Power Meter & Sensor
from LadyBug Technologies
|
| The LB5954L from LadyBug Technologies is a True-RMS Power Sensor that operates from 9 kHz to 54 GHz. This general-purpose True-RMS average power meter can be used to perform scalar measurements. It can measure an average continuous power from -60 dBm to +26 dBm (~400 mW) and peak input pulsed power of up to 2 W. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Scattering Probe for Planar Near-Field Measurements from 50 to 75 GHz | |
Near Field Probe
from Microwave Vision Group
|
| The DLP-PNF-5000 from Microwave Vision Group is a Minimum Scattering Probe for planar near-field measurements from 50 to 75 GHz. It provides a gain from 8 to 9 dBi and has a VSWR of less than 1.90:1. This probe has port-to-port isolation of more than 45 dB and cross-polar discrimination of over 35 dB. It supports wideband orthomode junction (OMJ) based on an inverted quad-ridge circular waveguide (with external feeding circuits) to provide dual linear polarization for planar near-field testing. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2/4-Ports Vector Network Analyzers from 70 kHz to 220 GHz | |
Vector Network Analyzer
from Anritsu
|
| The VectorStar ME7838x4 Series from Anritsu are 4-Port Vector Network Analyzers (VNAs) that operate from 70 kHz to 220 GHz. These VNAs offer a new level of performance for device modeling engineers struggling to accurately and reliably characterize their devices and for R&D engineers pushing the last traction of a dB out of their state-of-the-art designs. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wideband IF Vector Signal Generator from 11 to 21 GHz | |
Signal Generator
from Rohde & Schwarz
|
| The R&S SFI100A from Rohde & Schwarz is an IF Vector Signal Generator (VSG) that operates from 11 to 21 GHz. It can deliver an output power from -90 dBm to +10 dBm with a power resolution of 0.01 dB and a frequency step size of 0.001 Hz. This signal generator satisfies the bandwidth requirements of demanding applications such as early 6G research, mmWave WLAN, and automotive radar. |
| |
Download Datasheet
Product Details | |
|
|
|
| PXI Vector Signal Transceiver from 380 MHz to 12 GHz | |
PXI RF Signal Transceiver
from Keysight Technologies
|
| The M9416A from Keysight Technologies is a PXI Vector Signal Transceiver that operates from 380 MHz to 6/8/12 GHz. It consists of a vector signal generator (VSG) and a vector signal analyzer (VSA) in a 4-slot PXIe module. This transceiver uses the N9065EM1E sequence analyzer measurement application to accelerate the measurement speed of the VSA. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Spectrum Instrumentation | | |
|
|
|
|
|
|
|
| Non-PLL RF Signal Generators from 10 MHz to 6 GHz | |
Signal Generator
from Boonton
|
| The SGX1000 Series from Maury Microwave are RF Signal Generators that operate from 10 MHz to 6 GHz. They deliver an output power from -50 dBm to +18 dBm with a power resolution of 0.01 dB and have a frequency step size of 0.001 Hz. These signal generators utilize a unique non-phase locked loop (PLL) design with a digital front-end and direct, proprietary back-end. |
| |
Download Datasheet
Product Details | |
|
|
|
| Miniature Signal Generator from 10 MHz to 15 GHz | |
Signal Generator
from Atlantic Microwave
|
| The SG15-840002 from ETL Systems is a Miniature Signal Generator that operates from 10 to 15000 MHz covering L, S, and C frequency bands. It delivers an output power up to 13 dBm in 0.5 dB steps and has a frequency step size of 1 to 10 Hz. This signal generator has spurious levels of less than -70 dBc and harmonics of -25 dBc with a phase noise of less than -120 dBc/Hz (@100 KHz offset). |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-port Vector Network Analyzer from 10 MHz to 44 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The S5243 from Copper Mountain Technologies is a 2-port Vector Network Analyzer that operates from 10 MHz to 44 GHz. It has an excellent dynamic range of 130 dB, typ. (10 Hz IF BW) and a fast measurement speed of 17 µs. The VNA can be used to measure all four S parameters (S11, S21, S12, and S22) and has an output power that can be adjusted from -50 dBm to 0 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Real-Time Spectrum Analyzers from 9 kHz to 3.0 or 7.5 GHz | |
RF Spectrum Analyzer
from Tektronix, Inc.
|
| The RSA600A Series from Tektronix are Real-Time Laboratory Spectrum Analyzers that cover a frequency range of 9 kHz to 3.0 or 7.5 GHz. They have an acquisition bandwidth of 40 MHz and deliver a real-time IF acquisition data rate of 112 Ms/s (16-bit integer samples) with a sweep speed of up to 24.7 GHz/sec. These RTSAs have an attenuation range of 0 to 51 dB (in 1 dB steps) and a DANL of less than -164 dBm/Hz with 3rd Order Inter-modulation distortion level of -80 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Universal, Non-Reflective 4x32 Switch Matrix from 100 kHz to 8 GHz | |
Switch Matrix
from Becker Nachrichtentechnik GmbH
|
| The BSWM-4X32CSR from Becker Nachrichtentechnik is a 4x32 Switch Matrix that operates from 100 kHz to 8 GHz. This bi-directional RF switch matrix is ideal for multi-signal routings. All 4 non-reflective instrument ports can be routed to 32 DUT ports. In the case of non-routing, the ports are matched to 50 ohms. It has 4 ports for measurement instruments. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1.0 mm OSLT Calibration Kit from DC to 116.5 GHz | |
VNA Calibration Kit
from Spinner Group
|
| The BN 535742 from Spinner Group is an OSLT Calibration Kit with 1.0 mm plug and socket connectors that operates from DC to 116.5 GHz (resonance free up to 120 GHz). This kit consists of a 1.0 mm open-circuit plug, 1.0 mm open circuit socket, 1.0 mm short circuit plug, 1.0 mm short circuit socket, 1.0 mm load plug, 1.0 mm load socket, 1.0 mm through plug/plug, 1.0 mm through socket/socket, 1.0 mm through plug/socket, torque wrench 6 mm/45 N-cm, torque wrench 6 mm/34 N-cm, and a double open-ended spanner (7 mm). |
| |
Download Datasheet
Product Details | |
|
|
|
| Modular THz Signal Frequency Extender from 220 to 330 GHz | |
Signal Generator Extender
from ACST GmbH
|
| The 1219E-18A from ACST GmbH is a THz Signal Frequency Extender that upconverts input frequencies from 12.22 - 18.33 GHz to 220 - 330 GHz (multiplication factor of 18). This extender has a modular design that allows users to have access to more than one band by combining multiple standard extenders. It delivers an output power of 4 dBm and has a mechanically-driven variable attenuator to control the output power. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Probe Set for Direct Power Injection and Measurements up to 12 GHz | |
RF Probe
from Langer EMV-Technik
|
| The P512 Set from Langer EMV-Technik is an RF Probe Set for measurements up to 12 GHz. It is designed to enable direct power injection (DPI) into the pins of the IC in a conducted manner according to the IEC 62132-4 standard. The probe is connected to the power amplifier with an RF connector on the back of the probe and then the IC pins are contacted using the tip of the probe. |
| |
Download Datasheet
Product Details | |
|
|
|
| Relay Programmable Attenuator from DC to 2150 MHz | |
RF Variable Attenuator
from JFW Industries
|
| The 75P-225 from JFW Industries is a Relay Programmable Attenuator that operates from DC to 2150 MHz. It has an attenuation range of 0 to 63.5 dB in 0.5, 1, 2, 4, 8, 16, and 32 dB steps with an attenuation accuracy of up to ± 1.0 dB. This attenuator has an insertion loss of less than 2.2 dB and can handle an input power of 0.5 W with a VSWR of less than 1.50:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Javelin-Tipped Expanded Polystyrene Absorber from 2.1 to 110 GHz | |
Microwave Absorber
from Dutch Microwave Absorber Solutions
|
| The MT13-JT from Dutch Microwave Absorber Solutions (DMAS) is an Expanded Polystyrene Absorber that operates from 2.1 to 110 GHz. It is based on a unique Javelin-tipped design that matches the performance of traditional foam absorbers. This absorber delivers stable performance, making it suitable for use in antenna ranges and wireless over-the-air (OTA) test chambers. |
| |
Download Datasheet
Product Details | |
|
|
|
| Flexible VNA Cable Assembly from DC to 65 GHz | |
RF Cable Assembly
from Waka Manufacturing
|
| The AM1KVMVM from Waka Manufacturing is a Flexible VNA Cable Assembly that operates from DC to 65 GHz. It has an insertion loss of 4.95 dB (at 65 GHz) and a VSWR of 1.60:1 It offers high durability, phase-stability, and flexibility along with low insertion loss. This cable assembly has an outer diameter of 4 mm and a minimum bend radius of 15 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Horn Antennas from 1.7 to 33 GHz | |
Horn Antenna
from Pasternack Enterprises Inc
|
| The PE1WAN Series from Pasternack are Pre-Built Horn Antenna Assemblies that operate from 1.7 to 33 GHz. They provide a gain of 10, 15, or 20 dBi and have a VSWR of 1.30:1. These linearly polarized gain horn assemblies can handle a peak input power of 20 to 500 W and have a half-power beam width of 31 or 52.1 degrees (horizontal) & 32 or 51.6 degrees (vertical). |
| |
Download Datasheet
Product Details | |
|
