| New RF and Microwave Products this Week . |
|
|
| Silicon SPDT Reflective Switch from 0.4 GHz to 8 GHz | |
RF Switch
from Analog Devices
|
| The ADRF5162 from Analog Devices is a Silicon SPDT Reflective Switch that operates from 0.4 GHz to 8 GHz. It has a switching speed of 800 ns, provides an isolation of 45 dB and an insertion loss of less than 0.8 dB. This reflective switch can handle an input of power of 45.5 dBm (~38.5 W), a peak input power of 50 dBm (100 W) and has a return loss of 20 to 25 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 W Coaxial Termination from DC to 18 GHz | |
Termination
from Inmet by Spectrum Control
|
| The TN180M-5W from Inmet by Spectrum Control is a Termination that operates from DC to 18 GHz. It can handle an input power of 5 W and has a VSWR of less than 1.25:1. This 50 Ohm termination is available in an Anodized Aluminum housing that measures 1.15 x 0.61 inches and has Gold-plated Beryllium Copper contacts with a passivated stainless steel Type N male connector. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Way Wilkinson Power Divider from 1 to 67 GHz | |
Power Divider
from HYPERLABS
|
| The HL9677 from HYPERLABS is a 2-Way Wilkinson Power Divider that operates from 1 to 67 GHz. It has an insertion loss of 4 dB, provides an isolation of 15 dB, and has a group delay of 260 ps. This power divider can handle an input power of 1 W (~30 dBm) and has a return loss of 20 dB. It has an amplitude match of ±0.5 dB and a phase match of ±1°. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface-Mount 90° Hybrid Coupler from 2.4 to 2.5 GHz | |
90 Degree Hybrid Coupler
from Innovative Power Products
|
| The IPP-7183 from Innovative Power Products is a 90° Hybrid Coupler that operates from 2.4 to 2.5 GHz. It can handle an input power of 600 W, provides an isolation of more than 20 dB, and has an insertion loss of 0.15 dB. This hybrid coupler has a phase balance of ±4° and an amplitude balance of ±0.30 dB. It is available in a surface-mount package that measures 0.35 x 0.56 x 0.146 inches. |
| |
Download Datasheet
Product Details | |
|
|
|
| Programmable AWGN Noise Generators from 10 MHz to 3 GHz | |
Noise Generator
from Boonton
|
| The NGX1000 Series from Boonton are Programmable Noise Generators that operate from 10 MHz to 3 GHz. They generate additive white gaussian noise (AWGN) with an output power of 0/+10 dBm and have a noise attenuation range from 0 to 127 dB in 0.1 dB steps. These noise generators can be controlled manually via a 5-inch touchscreen display or remotely via Ethernet. |
| |
Download Datasheet
Product Details | |
|
|
|
| Handheld Real-Time Spectrum Analyzers from 9 kHz to 9.5/20 GHz | |
RF Spectrum Analyzer
from HAROGIC Technologies
|
| The PXE Series from HAROGIC Technologies are Handheld Real-Time Spectrum Analyzers (RTSAs) that operate from 9 kHz to 9.5/20 GHz. These spectrum analyzers operate in standard sweep, detection analysis/zero span, and real-time spectrum analysis mode. They implement an FFT engine on the built-in FPGA and support frame compression with trace detection while ensuring no missing samples between FFT frames. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Real-Time Spectrum Analyzer with WR-15 Waveguide Interface from 9 kHz to 70 GHz | |
RF Spectrum Analyzer
from Aaronia AG
|
| The SPECTRAN V6 ECO XPR 100XA-WR15 from Aaronia AG is a Real-Time Spectrum Analyzer that operates from 9 kHz to 70 GHz and has a WR-15 Waveguide Interface. The waveguide connection allows measurements in the millimeter wave range that are not possible with conventional cables. It is designed to provide a cost-effective development and validation platform for all millimeter-wave applications, including those with the shortest signal transmissions. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ceramic Chip Inductors from 0.67 to 100 nH | |
RF Inductor
from Coilcraft
|
| The 0302CS Series from Coilcraft are Ceramic Chip Inductors with inductance values from 0.67 to 100 nH. They have a high Q-factor of up to 131 (at 2.4 GHz) and an inductance tolerance of 5 to 10%. These inductors have DC resistances of less than 3.26 Ohms and a current rating of up to 1600 mA. They are 20% smaller in size than Coilcraft’s 0402CS inductors. These RoHS-compliant inductors are available in a compact 0805 package size that measures 0.86 x 0.53 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 0.5 W Power Amplifier from 100 kHz to 16 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-HPA-0000-1200-26 from ERZIA is a Power Amplifier that operates from 100 kHz to 16 GHz. It delivers a saturated output power of 27 dBm (~0.5 W) with a small signal gain of 32 dB and flatness of ±1.5 dB. This amplifier requires a DC supply of 12 V and consumes 5.2 W of power. It is available in a compact Gold-plated Aluminum housing that measures 61 x 36 x 14.5 mm and has SMA female RF connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Fractional-N PLL Frequency Synthesizer from 16 to 23 GHz | |
Frequency Synthesizer
from Luff Research, an Ironwave Technologies Company
|
| The SLSM6-1623 from Luff Research is a Single Phase-Locked Loop (PLL) Frequency Synthesizer that generates output signals from 16 to 23 GHz. This synthesizer has a PLL IC, amplifiers, local oscillators with TCXO, an integrator, and a power divider. It delivers an output power of +15 dBm, has a phase noise of less than -88 dBc/Hz (at 10 kHz offset), and has a frequency step size of 1 kHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-Harmonic Waveguide Mixer from 110 to 330 GHz | |
Waveguide Mixer
from ACST GmbH
|
| The 312F from ACST GmbH is a Sub-Harmonic Waveguide Mixer that operates from 220 to 330 GHz (RF input) and 110 to 165 GHz (LO input). It can handle an LO input power of +9 dBm and an RF input power of up to -10 dBm. This mixer produces an IF output frequency of 0-40 GHz and has a DSB conversion loss of 8 dB. It is based on ACST Schottky mixer technology and can be combined with full-band LOs to build a full-band heterodyne receiver. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Javelin-Tipped Expanded Polystyrene Absorber from 2.1 to 110 GHz | |
Microwave Absorber
from Dutch Microwave Absorber Solutions
|
| The MT13-JT from Dutch Microwave Absorber Solutions (DMAS) is an Expanded Polystyrene Absorber that operates from 2.1 to 110 GHz. It is based on a unique Javelin-tipped design that matches the performance of traditional foam absorbers. This absorber delivers stable performance, making it suitable for use in antenna ranges and wireless over-the-air (OTA) test chambers. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| PXIe Terminated SPDT Microwave Relay from 18 to 110 GHz | |
PXI RF Switch
from Pickering Interfaces
|
| The 42-781A-92x from Pickering is a PXI Terminated SPDT Microwave Relays that operates from 18 to 110 GHz. It can handle RF power of up to 35 W, has an insertion loss of less than 2.5 dB, and provides more than 50 dB of isolation. This microwave relay consists of one or two microwave changeover switches and is available with external terminations and connections via front panel-mounted SMA 1.0 connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Radio Communication Test Station for 5G Test Requirements | |
Channel Emulator
from Anritsu
|
| The MT8000A from Anritsu is a Radio Communication Test Station for developing 5G communications terminals, chipsets and devices. This all-in-one desktop tester supports RF and protocol tests for the sub-6 GHz, including band n41 and millimeter wave bands. Combining it with the OTA Chamber enables both millimeter wave band RF measurements and beamforming tests using call connections specified by 3GPP. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1:2 T-Flip Flop Frequency Divider from 20 to 40 GHz | |
Frequency Divider
from SHF Communication Technologies
|
| The SHF C643 A from SHF Communication Technologies is a 1:2 T-Flip Flop (TFF) Frequency Divider that converts an input frequency from 40-80 GHz to an output frequency from 20-40 GHz. This prescaler accepts a sinusoidal input signal and delivers two differential output signals with a phase shift of 90° between them. It supports both single-ended and differential-ended operations. |
| |
Download Datasheet
Product Details | |
|
|
|
| WR-6.5 Hybrid Circulator from 110 to 170 GHz | |
Waveguide Circulator
from Micro Harmonics
|
| The HC065F from Micro Harmonics is a Hybrid Circulator that operates from 110 to 170 GHz. It has an insertion loss of 1.2 dB and provides an isolation of more than 17 dB. This circulator can handle an input power of up to 3 W and has a VSWR of 1.40:1. It is based on a patent-pending design and combines an orthomode transducer with a Faraday rotator to achieve the bandwidth of the full waveguide band. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Wi-Fi 7 (802.11be) Front End Module | |
Front End Module
from Qorvo
|
| The QPF4209 from Qorvo is a Wi-Fi 7 (802.11be) Front End Module that operates from 2412 to 2484 MHz. It consists of a 2.4 GHz power amplifier (PA), single pole two-throw switch (SP2T), coupler structure, and a bypassable low noise amplifier (LNA). This FEM also has an RF output coupler, a broad-range constant slope voltage logarithmic power detector for precise power control, and digital pre-distortion (DPD) for enhanced linear output power and throughput. |
| |
Download Datasheet
Product Details | |
|
|
|
| Flexible VNA Cable Assembly from DC to 65 GHz | |
RF Cable Assembly
from Waka Manufacturing
|
| The AM1KVMVM from Waka Manufacturing is a Flexible VNA Cable Assembly that operates from DC to 65 GHz. It has an insertion loss of 4.95 dB (at 65 GHz) and a VSWR of 1.60:1. It offers high durability, phase-stability, and flexibility along with low insertion loss. This cable assembly has an outer diameter of 4 mm and a minimum bend radius of 15 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Double Ridged Horn Antenna from 2.5 to 30 GHz for 5G Applications | |
Horn Antenna
from RF SPIN
|
| The DRH30C from RF Spin is a Double Ridged Horn Antenna that operates from 2.5 to 30 GHz. This linearly-polarized antenna has an antenna factor from 32 to 40 dB/m. It can handle a CW input power of 25 W, a peak input power of 50 W, and has a VSWR of less than 2.35:1. This antenna is based on a 3D printed patented lens technology, which improves gain and overall performance while maintaining low weight and small size. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ruggedized Low Noise MEMS TCXO from 60 to 220 MHz | |
TCXO
from SiTime
|
| The SiT7202 from SiTime is a Commercial-Off-The-Shelf (COTS) MEMS Temperature Controlled Crystal Oscillator (TCXO) that operates from 60 to 220 MHz. This TCXO’s design eliminates the need for frequency multipliers and offers excellent dynamic stability under airflow, fast temperature ramp, and vibration-prone environments. It ensures no activity dips or micro-jumps and is resilient to board bending. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Precision Quad-Band GNSS Module | |
GNSS Module
from Quectel
|
| The LG290P from Quectel is a Quad-Band GNSS Module that supports multiple constellations, including GPS, GLONASS, Galileo, BDS, QZSS, and NavIC. Utilizing multi-mode and multi-frequency RTK algorithms, it delivers fast and reliable RTK high-precision positioning results at 20 Hz, even in complex environments with interference and blockage. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ceramic 3D Printed GNSS Antenna for L1/E1 Bands | |
GPS/GNSS Antenna
from Anywaves
|
| The Ceramic 3D Printed GNSS L1/E1 Bands Antenna from Anywaves is a GNSS Antenna that operates from 1.563 to 1.587 GHz (GPS LI band) and 1.559 to 1.591 GHz (Galileo E1 band). It delivers a gain of more than 5.5 dBi (at boresight) and operates in a right-hand circular polarization mode to avoid signal blackouts. This GNSS antenna provides an efficiency of more than 95 % and has a reflection coefficient of less than -10 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 9-Port 4x4 MIMO Low-Profile 5G Antennas for Transportation Applications | |
Antenna
from Excelwave
|
| The EAM9-4C4W1G-xx Series from Excelwave are 9-Port Low-Profile 5G Antennas that operate from 617-960 MHz and 1690-6000 MHz. These vertically/RHCP-polarized antennas provide a gain of up to 8 dBi and have a VSWR of 2:1. They are designed for transit applications and incorporate low-profile heavy-duty radome assembly that meets the requirements for a variety of vehicles, including cars, buses, trucks, trams, and trains. |
| |
Download Datasheet
Product Details | |
|
