| New Aerospace & Defense Products . |
|
|
| 0.5 W Power Amplifier from 100 kHz to 16 GHz | |
RF Amplifier
from ERZIA
|
| The ERZ-HPA-0000-1200-26 from ERZIA is a Power Amplifier that operates from 100 kHz to 16 GHz. It delivers a saturated output power of 27 dBm (~0.5 W) with a small signal gain of 32 dB and flatness of ±1.5 dB. This amplifier requires a DC supply of 12 V and consumes 5.2 W of power. It is available in a compact Gold-plated Aluminum housing that measures 61 x 36 x 14.5 mm and has SMA female RF connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W, Class-AB GaN Solid-State Power Amplifier from 2 to 6 GHz | |
RF Amplifier
from RFTR Electronics
|
| The JA05004000P47 from RFTR Electronics is a Solid-State Power Amplifier that operates from 0.5 to 4 GHz. It delivers an output power of 50 W with a gain of 47 dB and a flatness of ± 4 dB. This Class AB amplifier utilizes GaN-on-SiC transistors and is suitable for CW and pulsed waveforms. With a fast switching time of less than 5 µs (ON/OFF), this amplifier ensures power saving during pulsed applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Transmit and Receive Reflective SPDT Switch from 6 to 12 GHz | |
RF Switch
from Analog Devices
|
| The ADRF5141 from Analog Devices is a Reflective SPDT Switch that operates from 6 to 12 GHz. It is used in transmit and receive applications and has an integrated power limiter on the receive path. In the Rx path, it has a flat leakage of 17 dBm and an insertion loss of 1.4 dB (8 to 11 GHz). In the Tx path, this switch has an insertion loss of 0.9 dB (8 to 11 GHz). |
| |
Download Datasheet
Product Details | |
|
|
|
| Direct RF Multi-Chip Module Powered by AMD SoCs | |
RF Digitizer
from Mercury Systems
|
| The RFS1140 from Mercury Systems is a Direct RF Multi-Chip Module System-in-Package (SiP) for broad-spectrum analysis. It combines the processing power of the AMD Versal™ AI Core series adaptive SoC, with Jariet Technologies’ high-speed data converters. This SiP employs data converters from Jariet Technologies with a sample rate of 64 Gsps and has an analog bandwidth of up to 32 GHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Channel Software-Defined Radio + Downconverter from 20 MHz to 6 GHz | |
Software Defined Radio
from Epiq Solutions
|
| The NDR364 from Epiq Solutions is a 4-Channel Software-Defined Radio (SDR) and Superheterodyne Downconverter that operates from 20 MHz to 6 GHz. It consists of 4 channels, with each supporting an instantaneous bandwidth of 125 MHz, and provides phase coherent and independent tuning on all the channels. This SDR has an on-board Kintex UltraScale series FPGA for the channelizer with variable rate DDCs, selectable decimation stages, VITA-49 for matter, data multiplexer, and 10 Gigabit Ethernet digital IF data interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by Quantic PMI (Planar Monolithics) | | |
|
|
| Electronic Warfare Engagement System from 1 to 40 GHz | |
Software Defined Radio
from Systems & Processes Engineering Corporation (SPEC)
|
| The ADEP 5000 from SPEC is an advanced Electronic Warfare Engagement System operating within a frequency range of 1 to 20 GHz, with an optional extension to 22-40 GHz. It integrates cutting-edge RF/microwave transceivers, Direct RF conversion modules, and a high-performance Versal AI/ML engine optimized for AI applications, ensuring the system's adaptability to various operational requirements. |
| |
Download Datasheet
Product Details | |
|
|
|
| Counter-Unmanned Aerial System for Detection and Disruption of UAS | |
CUAS (Counter-Unmanned Aerial System)
from DroneShield
|
| The DroneSentry-X Mk2 from DroneShield is a CUAS (Counter-Unmanned Aerial System) that is capable of detection and disruption of UAS (e.g. drones) operating at consumer and commercial ISM frequencies. It uses FPGA & software-defined radio technology and provides a full hemispheric detection capability with directional (cardinal) bearing target identification. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Precision Drone Detection System from 400 MHz to 6 GHz | |
CUAS (Counter-Unmanned Aerial System)
from Aaronia AG
|
| The AARTOS X9 from Aaronia is a Drone Detection System that operates from 400 MHz to 6 GHz (10 MHz to 8 GHz option available). It can be used on mobile/stationary platforms for drone protocol decoding and RF signal detection over a distance of up to 14 km and 40 km (long range). This system operates with the same precision as the AARTOS X7, but additionally offers seamless ultra-wideband monitoring with four independent receivers, an ISOLOG 3D DF-160 direction finding antenna, and three optimized amplifier stages. |
| |
Download Datasheet
Product Details | |
|
|
|
| Absorptive SP16T Switch from 100 MHz to 27 GHz | |
RF Switch
from Quantic PMI (Planar Monolithics)
|
| The P16T-100M27G-100-T-DEC from Quantic PMI (Planar Monolithics) is a SP16T Switch that operates from 100 MHz to 27 GHz. It has a switching speed of less than 100 ns, an insertion loss of 8 dB, and provides an isolation of 90 dB. This absorptive switch can handle a CW input power of up to 20 dBm and has a VSWR of less than 2.50:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W Dual-Channel Bidirectional Amplifier from 2.2 to 2.5 GHz | |
RF Amplifier
from NuWaves RF Solutions
|
| The NW-BA-DUAL-S-50-C02-S01 from NuWaves RF Solutions is a 2x2 Dual-Channel Bidirectional Amplifier that operates from 2.2 to 2.5 GHz. On the Tx side, this amplifier delivers a saturated output power of 47 W with a gain of 17 dB while on the Rx side, it provides a gain of 12 dB and has a noise figure of 2.5 dB. This BDA is suitable for extending the range of communications and datalinks for ISR applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 W Driver Amplifier from 6 to 18 GHz | |
RF Amplifier
from Qorvo
|
| The QPA0023 from Qorvo is a Driver Amplifier that operates from 6 to 18 GHz. It delivers a gain of 14 dB and has a noise figure of 5 dB with an output P1dB of 30 dBm(~1 W). This amplifier is fabricated on Qorvo’s production 0.15 um pHEMT process (QPHT15) and has integrated DC blocking caps on both I/O ports for easy handling and simple system integration. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W Solid-State Power Amplifier from 18 to 26.5 GHz | |
RF Amplifier
from Elite RF
|
| The AB018026G4747AC from Elite RF is a Solid-State Power Amplifier (SSPA) that operates from 18 to 26.5 GHz. It delivers a CW output power of more than 50 W with a gain of more than 47 dB and has a flatness of ±4dB. This amplifier is based on Class AB solid-state design. It has spurious levels of -60 dBc and harmonics of -20 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| E-pHEMT Low Noise Amplifier MMIC from 0.05 to 6 GHz | |
RF Amplifier
from Mini Circuits
|
| The PMA-545+ from Mini-Circuits is an E-pHEMT Low Noise Amplifier MMIC that operates from 0.05 to 6 GHz. It provides a gain of up to 26.1 dB with a noise figure of less than 2.4 dB and has an output P1dB of 19.3 dBm. This amplifier has a unique combination of low noise and high IP3 making it ideal for sensitive receiver applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Right-Angle Waveguide-to-Coaxial Adapter from 26.5 to 40 GHz | |
Waveguide to Coax Adapter
from Spacek Labs
|
| The T28-K from Spacek Labs is a 90° Waveguide-to-Coaxial Adapter that operates in the Ka-Band from 26.5 to 40 GHz. It can be used to adapt a component or system from a WR-28 (UG599/U) waveguide interface to the 2.92mm (K) coaxial connector and vice versa. This adapter has an insertion loss of 0.3 dB and a VSWR less than 1.35:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| 90° Hybrid Coupler from 400 MHz to 7.125 GHz | |
90 Degree Hybrid Coupler
from KRYTAR
|
| The 300407125 from KRYTAR is a 90° Hybrid Coupler that operates from 400 MHz to 7.125 GHz. It provides a coupling of 3 dB, an isolation of more than 19 dB, and has an insertion loss of less than 1.8 dB. This coupler can handle an average input power of 20 W and a peak input power of 3 kW. It has an amplitude imbalance of ±1 dB and a phase imbalance of ±5°. |
| |
Download Datasheet
Product Details | |
|
|
|
| RHCP Spiral Antenna from 18 to 50 GHz for Military Applications | |
Antenna
from Cubic Nuvotronics, Inc.
|
| The PSA1850R from Cubic Nuvotronics is a Spiral Antenna that operates from 18 to 50 GHz. It is available in a cavity-backed package that measures ø 0.5x 1.17 inches and has a 2.4 mm connector. This antenna is ideal for wideband direction finding, radar warning receivers, interferometry, and SIGINT/ELINT applications. The PSA1850R provides an average gain of -1 to -3 dBi and a peak gain from 3 to 7 dBi. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ruggedized Low Noise MEMS TCXO from 60 to 220 MHz | |
TCXO
from SiTime
|
| The SiT7202 from SiTime is a Commercial-Off-The-Shelf (COTS) MEMS Temperature Controlled Crystal Oscillator (TCXO) that operates from 60 to 220 MHz. This TCXO’s design eliminates the need for frequency multipliers and offers excellent dynamic stability under airflow, fast temperature ramp, and vibration-prone environments. It ensures no activity dips or micro-jumps and is resilient to board bending. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
