| Products Showcased at EuMW 2024 . |
|
|
| FMCW Radar Front-End Module from 110 to 150 GHz | |
Front End Module
from Farran
|
| The FMCW-06-0003 from Farran Technology is an FMCW Radar Front-End Module (FEM) that operates from 110 to 150 GHz. This FEM is based on a superheterodyne architecture with an integrated bi-static antenna configuration. It combines wide bandwidth and high-resolution performance in a compact modular package and delivers a transmit signal derived from an internal VCO signal, which is internally multiplied. |
| |
Download Datasheet
Product Details | |
|
|
|
| W-band Solid State Power Amplifier from 92 to 114 GHz | |
RF Amplifier
from Filtronic
|
| The Cerus 32 from Filtronic is a Solid State Power Amplifier (SSPA) that operates from 92 to 114 GHz (W-Band). It delivers a saturated output power of more than +43 dBm and a gain of more than 20 dB. This SSPA has a 32-way configuration and incorporates Filtronic’s MMIC technology to deliver high-output power and linearity. It has a bandwidth of 5 GHz and supports 256 QAM modulation. |
| |
Product Details | |
|
|
|
| Semi-Rigid Phase Stable Cables Assemblies for High Radiation Environments | |
RF Cable Assembly
from Times Microwave Systems
|
| The SiO2 cable assemblies from Times Microwave have been developed for the toughest interconnect applications. They have a stainless steel outer jacket with a copper outer conductor and a low density, high purity Silicon Dioxide dielectric. The use of advanced equipment and materials results in the production of a low loss, high velocity dielectric with consistent properties from run to run. |
| |
Download Datasheet
Product Details | |
|
|
|
| Real-Time Spectrum Analyzer with WR-15 Waveguide Interface from 9 kHz to 70 GHz | |
RF Spectrum Analyzer
from Aaronia AG
|
| The SPECTRAN V6 ECO XPR 100XA-WR15 from Aaronia AG is a Real-Time Spectrum Analyzer that operates from 9 kHz to 70 GHz and has a WR-15 Waveguide Interface. The waveguide connection allows measurements in the millimeter wave range that are not possible with conventional cables. It is designed to provide a cost-effective development and validation platform for all millimeter-wave applications, including those with the shortest signal transmissions. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Vector Network Analyzer from 10 MHz to 26.5 GHz | |
Vector Network Analyzer
from Keysight Technologies
|
| The NA5202A from Keysight is a Vector Network Analyzer that operates from 10 MHz to 26.5 GHz. It can deliver precise linear and nonlinear measurements with advanced error correction and simplifies frequency-translating component testing. This VNA leverages preselection filters built into the integrated low-noise receivers to improve dynamic range and has a highly configurable test set architecture. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 2/4-Port Vector Network Analyzers from 100 kHz to 13.5/26.5 GHz | |
Vector Network Analyzer
from SIGLENT
|
| The SNA6000A Series from Siglent are 2/4-Port Vector Network Analyzers (VNA) that operate from 100 kHz to 13.5/26.5 GHz with a frequency resolution of 1 Hz. They have a dynamic range of 135 dB and a level resolution of 0.05 dB. These VNAs provide instantaneous measurement results of parameters such as Q-factor, bandwidth, and insertion loss, as well as insights into scattering, differential, and time-domain measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1-Port Modular Vector Network Analyzers from 1 MHz to 8/20/43.5 GHz | |
Vector Network Analyzer
from Anritsu
|
| The ShockLine MS46131A series from Anritsu are modular 1-Port Vector Network Analyzers that operate from 1 MHz to 8/20/43.5 GHz. These PC-controlled VNAs are ideally suited for 1-port RF and microwave applications in engineering, manufacturing, and education. The VNA models have fast sweep speed times and excellent corrected directivity (>42 dB) making them suitable for a variety of 1-port device test applications including measuring passive 5G mm-Wave components. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Path Vector Signal Generator from 100 kHz to 67 GHz | |
Signal Generator
from Rohde & Schwarz
|
| The R&S SMW200A from Rohde and Schwarz is a dual-path Vector Signal Generator that operates from 100 kHz to 67 GHz. It has a modular design that can be equipped with the exact options required for specific applications. This signal generator can be used in a number of configurations from a classic single-path vector signal generator to a multichannel MIMO receiver tester. |
| |
Download Datasheet
Product Details | |
|
|
|
| Broadband Portable Signal Generator from 0.5 to 40 GHz | |
Signal Generator
from Vaunix
|
| The BLX-403 Lab Brick from Vaunix is a portable and programmable signal generator that operates from 0.5 to 40 GHz. It has a resolution of 100 Hz, switching time of 5 ms, output power of 10 dBm, and 40 dB of output level control. It has advanced features such as frequency sweeping, internal/external 10 MHz reference, and standard pulse modulation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W GaN Power Amplifier MMIC from 2.6 to 3.8 GHz | |
RF Amplifier
from WAVEPIA Co,. Ltd.
|
| The WPGM0204040M from WAVEPIA is a GaN Power Amplifier MMIC that operates from 2.6 to 3.8 GHz. It delivers a saturated output power of 47 dBm (~50 W) with a small signal gain of 25.1 dB and has a power-added efficiency (PAE) of 53.9%. This S-band power amplifier requires a DC supply from 28 to 32 V and consumes less than 1.04 A of drain current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Javelin-Tipped Expanded Polystyrene Absorber from 2.1 to 110 GHz | |
Microwave Absorber
from Dutch Microwave Absorber Solutions
|
| The MT13-JT from Dutch Microwave Absorber Solutions (DMAS) is an Expanded Polystyrene Absorber that operates from 2.1 to 110 GHz. It is based on a unique Javelin-tipped design that matches the performance of traditional foam absorbers. This absorber delivers stable performance, making it suitable for use in antenna ranges and wireless over-the-air (OTA) test chambers. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Quadplexer from 2 to 18 GHz | |
Quadplexer
from PLEXSA MANUFACTURING
|
| The QUAD61014TCA from Plexa Manufacturing is RF Quadplexer that has passbands from: 2 to 6 GHz, 6 to 10 GHz, 10 to 14 GHz, and 14 to 18 GHz. It has a return loss of 13 dB, isolation of more than 60 dB, and insertion loss of less than 1 dB. This quadplexer is based on suspended substrate stripline technology and can be used to split a broadband input into five adjacent frequency bands or combine five bands into a single output. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| IP67/IP68-Rated Waterproof RF and Microwave Connectors | |
RF Connector
from IntelliConnect
|
| The Pisces Series are waterproof connectors from IntelliConnect that have been developed for use in mil-aerospace, SCADA, marine, medical, transportation, and oil and gas applications. These IP67 and IP68 rated connectors are sealed internally and are therefore waterproof when unmated. They are available in various connector formats that include: ABMS (Rugged MCX), N-Type, Push-Pull, TNC, and SMA. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Loss Cable Assemblies from DC to 65 GHz | |
RF Cable Assembly
from ConductRF
|
| The D38999 Series from ConductRF are Low-Loss Cable Assemblies that operate up to 65 GHz. These plug-in cables are available with BMA, SMPM SMPS & Mil-Contact male and female connector options. They support RF contacts for sizes #8, #12 & #16, with serialization and custom markings. The D38999 Series offers custom lengths and various connector configurations, including optional phase-matched sets or kits of cables for use in lab. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz Hermetically-Sealed Oven Controlled Crystal Oscillator | |
OCXO
from KVG Quartz Crystal Technology GmbH
|
| The O-25CXXXX-ULPN-LF from KVG Quartz Crystal Technology is an Oven Controlled Crystal Oscillator (OCXO) that operates at 10.000 MHz. It provides Sinewave output waveforms with a phase noise of less than -166 dBc/Hz (at 1 kHz offset) and a frequency stability of ±2 ppb (vs. temperature). This oscillator has a warm-up time of up to 5 minutes and a g-sensitivity of less than 1 ppb/g. |
| |
Download Datasheet
Product Details | |
|
|
|
| Passive GaAs Double Balanced Mixer MMIC from 6 to 26 GHz | |
RF Mixer
from Marki Microwave
|
| The MM1-0626HCSP2 from Marki Microwave is a Passive GaAs Double Balanced Mixer MMIC with an RF/LO frequency from 6 to 26 GHz and an IF frequency from DC to 9 GHz. It has a conversion loss of 7 dB and can handle an input power of +15 dBm. This mixer provides an LO-to-RF isolation of 45 dB, an LO-to-IF isolation of 37 dB, and an RF-to-IF isolation of 42 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3 W Power Amplifier from 4.0 to 5.9 GHz | |
RF Amplifier
from MACOM
|
| The XP1044-QL from MACOM is a Power Amplifier that operates from 4.0 to 5.9 GHz. It delivers an output P1dB of 34.0 dBm (3 W) and a power gain of 18.5 dB. This 2-stage power amplifier has a noise figure of 5 dB and an input return loss of -10 dB. It produces a linear output power of 26 dBm (at less than 2.5% EVM) with an 802.16 OFDM signal and a peak-to-average ratio of 9.17 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W Power Amplifier from 860 to 930 MHz | |
RF Amplifier
from CML Microcircuits
|
| The CMX90A006 from CML Micro is a Power Amplifier that operates from 860 to 930 MHz. It delivers a saturated output power of 33.5 dBm (2W) and a small signal gain of 33 dB with a power-added efficiency of 52%. This 2-stage linear power amplifier has a return loss of -20 dB (input) and -10 dB (output). It is based on InGaP HBT process technology and provides exceptional reliability and balance between efficiency, gain and linearity. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-Octave Switch Filter Bank from 2 to 18 GHz | |
Switched Filter Bank
from ATEK MIDAS
|
| The ATEK656N5 from ATEK Midas is a Sub-Octave Switch Filter bank that operates from 2 to 18 GHz. It consists of an SP6T switch followed by 6 fixed frequency band pass filters and then another SP6T switch. This filter bank provides exceptional IIP3 power that enables high dynamic range wideband receiver frontends, and its sub-octave filter bank architecture improves overall system IIP2. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 W, E-Band Power Amplifier from 81 to 86 GHz | |
RF Amplifier
from Altum RF
|
| The ARF1007 from Altum RF is an E-Band GaAs Power Amplifier that operates from 81 to 86 GHz. It delivers a saturated output power of 30 dBm (1 W) with a linear gain of 21 dB. The amplifier is input as well as output matched to 50 ohms with an integrated, high dynamic range and temperature compensated power detector. It requires a bias voltage of 4 V and a bias current of 1100 mA. |
| |
Download Datasheet
Product Details | |
|
|
|
| High Power Frequency Source from 275 to 295 GHz | |
Frequency Synthesizer
from ACST GmbH
|
| The 1225D-SE from ACST GmbH is a mmWave Signal Source with a frequency range from 275 to 295 GHz. It has an integrated voltage-controlled oscillator (VCO) that can generate mmWave signals with an output power of +11 dBm. This signal source has V-tune ports to set the output signal frequency by tuning the voltage from 0.8 to 5 V. It has a modular design with plug-and-play operation and does not require any adjustment for proper operation. |
| |
Download Datasheet
Product Details | |
|
