| New RF and Microwave Products this Week . |
|
|
| Flexible Microwave Cable Assembly from DC to 50 GHz | |
RF Cable Assembly
from Times Microwave Systems
|
| The IB-086 (InstaBend® 086) from Times Microwave Systems is a Flexible Microwave Cable Assembly that operates from DC to 50 GHz. It can be bent very closely behind the connector, thereby simplifying the cable routing and minimizing the footprint. This cable is ideal for connecting RF circuit cards, modules, and enclosure panels.This cable assembly has a capacitance of 29 pF/ft, a velocity of propagation of 70%, and a delay of 1.45 ns/ft. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| On-Wafer Probing Cable Assemblies from DC to 67 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The StabilityWafer Series from Maury Microwave are On-Wafer Probing Cable Assemblies that operate up to 67 GHz. They have an insertion loss of less than 1.79 dB/ft,a velocity of propagation of 74% and a shielding effectiveness of over 90 dB. These assemblies have a time delay of 1.34 ns/ft with a phase stability of up to ±14° and an amplitude stability of ±0.05 to ±0.20 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3D Wireless Prediction Software | |
Software
from Remcom
|
| Wireless InSite® is a suite of ray-tracing models and high-fidelity EM solvers for the analysis of site-specific radio wave propagation and wireless communication systems. The RF propagation software provides efficient and accurate predictions of EM propagation and communication channel characteristics in complex urban, indoor, rural and mixed path environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Passive I/Q Mixer MMIC from 10 to 30 GHz | |
RF Mixer
from Mini Circuits
|
| The SMIQ-134H+ from Mini-Circuits is a MMIC Mixer with an RF/LO frequency from 10 to 30 GHz and an IF frequency from DC to 7 GHz. This mixer has a conversion loss of less than 9.2 dB and provides 35 dBc of image rejection. It is fabricated using GaAs HBT technology and has been designed to serve as a single-sideband (SSB) up-converter for transmit applications or an image rejection mixer for receiver applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W, GaN Power Amplifier MMIC from 16.5 to 21.5 GHz | |
RF Amplifier
from AmpliTech
|
| The AGMPA165215 from AmpliTech is a GaN HEMT Power Amplifier MMIC that operates from 16.5 to 21.5 GHz. It provides 20 dB of gain with a saturated output power of 35 dBm (~3.16 W) and has a PAE of 30 %. This GaN on SiC power amplifier requires a DC supply of +28 V and consumes 100 mA of current. It is available as a 50-ohm internally matched die that measures 2.4 x 1.8 x 0.1 mm and is ideal for point-to-point radio and K-Band SATCOM applications. |
| |
Product Details | |
|
|
| Sponsored by PCB Directory | | |
|
|
| D-Band Low Noise Amplifier from 110 to 170 GHz | |
RF Amplifier
from AT Microwave
|
| The AT-LNA-110170-3306 from AT Microwave is a Low Noise Amplifier that operates from 110 to 170 GHz. It provides 33 dB of gain with a noise figure of less than 8 dB and has a saturated output power of 0 dBm. This LNA is fabricated using InP-based MMIC technology, which ensures reliable and repeatable unit-to-unit results. It requires a DC supply of +5 V and consumes 70 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Way Resistive Power Divider from 6 to 40 GHz | |
Power Divider
from MECA
|
| The 804-3-23.000 from MECA is a 4-way resistive power divider that operates from 6 to 40 GHz. The divider can handle up to 30 Watts of power, has an insertion loss less than 2.6 dB, an isolation of over 14 dB and a VSWR under 1.80:1. It is available in a module with 2.92 mm female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W Fixed Attenuators from DC to 18 GHz | |
Fixed Attenuator
from JFW Industries
|
| The 50HFFA-XXX-2/18 Series from JFW Industries are Fixed Attenuators that operate from DC to 18 GHz. They are available in attenuation values from 1 to 30 dB (any 1 dB increment) and have a VSWR of less than 1.4:1. These attenuators can handle an average input power of up to 2 W and a peak input power of 100 W (5 µs pulse, 0.1% duty cycle). |
| |
Download Datasheet
Product Details | |
|
|
|
| Absorptive SP16T Switch from 100 MHz to 27 GHz | |
RF Switch
from Quantic PMI (Planar Monolithics)
|
| The P16T-100M27G-100-T-DEC from Quantic PMI (Planar Monolithics) is a SP16T Switch that operates from 100 MHz to 27 GHz. It has a switching speed of less than 100 ns, an insertion loss of 8 dB, and provides an isolation of 90 dB. This absorptive switch can handle a CW input power of up to 20 dBm and has a VSWR of less than 2.50:1. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| USB-Controlled, Programmable Signal Generator from 5 to 10 GHz | |
Signal Generator
from Vaunix
|
| The Lab Brick LMS-103 is a USB-compatible, synthesized signal generator that operates from 5 to 10 GHz and can generate a signal with an output power of up to 10 dBm. This USB Signal Generator has a low noise level, a fast 100-microsecond switching time and fine 100 Hz frequency resolution. It can be used with any PC or laptop computer with USB 2.0 port (or powered USB hub) and Windows 2000, XP, Vista, or Windows 7 operating system. |
| |
Download Datasheet
Product Details | |
|
|
| Featured e-Book | Download Now! | | |
|
|
| Low-Power LTE-M/NB-IoT/IoT-NTN Satellite/GNSS Module | |
Cellular Module
from u-blox AG
|
| The SARA-S528NM10 from u-blox is an LTE-M/NB-IoT/IoT-NTN Satellite/GNSS Module that is designed to provide global connectivity via LTE-M, NB-IoT, and satellite networks with a single module. It also has the u-blox M10 GNSS chipset and complies with 3GPP Release 17 NTN standards. This module also supports cellular LTE Cat-M1 and LTE Cat NB2 technologies based on 3GPP Release 14/15/17 features that are relevant for IoT applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface-Mount Low Noise Amplifier from 100 kHz to 8 GHz | |
RF Amplifier
from ATEK MIDAS
|
| The ATEK169P3 from ATEK MIDAS is a Low Noise Amplifier (LNA) that operates from 100 kHz to 8 GHz. It provides 17 dB of gain with a noise figure of 1.3 dB and has an output P1dB of 20.5 dBm. This LNA can be used up to 12 GHz and allows users to easily realize wideband receiver frontends. It requires a DC supply of 5 V and consumes 75 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 50 W, Class-AB GaN Solid-State Power Amplifier from 2 to 4 GHz | |
RF Amplifier
from RFTR Electronics
|
| The JA05004000P47 from RFTR Electronics is a Solid-State Power Amplifier that operates from 0.5 to 4 GHz. It delivers an output power of 50 W with a gain of 47 dB and a flatness of ± 4 dB. This Class AB amplifier utilizes GaN-on-SiC transistors and is suitable for CW and pulsed waveforms. With a fast switching time of less than 5 µs (ON/OFF), this amplifier ensures power saving during pulsed applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP67/IP68-Rated Waterproof RF and Microwave Connectors | |
RF Connector
from IntelliConnect
|
| The Pisces Series are waterproof connectors from IntelliConnect that have been developed for use in mil-aerospace, SCADA, marine, medical, transportation, and oil and gas applications. These IP67 and IP68 rated connectors are sealed internally and are therefore waterproof when unmated. They are available in various connector formats that include: ABMS (Rugged MCX), N-Type, Push-Pull, TNC, and SMA. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 4-Channel Software Defined Radio from 10 MHz to 6 GHz | |
Software Defined Radio
from BAE Systems
|
| The RXT7406 from BAE Systems is a 4-channel Software Defined Radio (SDR) that operates from 10 MHz to 6 GHz. Each channel can function independently or in a phase-coherent group. Phase coherence is maintained across multiple modules by sharing sample clocks from a master unit. This system includes 18 front-end pre-selected filters per channel, which are sub-octave above 90 MHz to reduce second-order intermodulation distortion (IMD2). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Pan-European eCall/ERA-GLONASS Conformance Test Solution | |
RF Test Set
from Keysight Technologies
|
| The E6950A from Keysight is an eCall/ERA-GLONASS Conformance Test Solution that performs end-to-end functional and standard-compliant conformance testing of eCall/ERA-GLONASS modules. It supports pan-European eCall and ERA-GLONASS and can also carry out audio performance analysis (PESQ/POLQA). This conformance test solution can simulate PSAP and static/dynamic GNSS coordinates required by the IVS to compile the minimum set of data (MSD). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| E-Band Low-Noise Amplifier from 71 to 86 GHz | |
RF Amplifier
from Altum RF
|
| The ARF1206L5 from Altum RF is an E-Band Low-Noise Amplifier that operates from 71 to 86 GHz. It delivers a gain of 18 dB and has a noise figure of less than 5 dB. This amplifier has two stages which are controlled by a single gate bias connection and a separate gate voltage to control the output stage. These voltages can be used to control the amplifier gain, to turn it off, or to connect to 0 V for full gain operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Electronic Warfare Engagement System from 1 to 40 GHz | |
Software Defined Radio
from Systems & Processes Engineering Corporation (SPEC)
|
| The ADEP 5000 from SPEC is an advanced Electronic Warfare Engagement System operating within a frequency range of 1 to 20 GHz, with an optional extension to 22-40 GHz. It integrates cutting-edge RF/microwave transceivers, Direct RF conversion modules, and a high-performance Versal AI/ML engine optimized for AI applications, ensuring the system's adaptability to various operational requirements. |
| |
Download Datasheet
Product Details | |
|
|
|
| AEC-Q100 Qualified Reflective SPDT Switch from 5 to 8500 MHz | |
RF Switch
from BeRex, Inc.
|
| The BSW7221V is a reflective SPDT RF switch that operates from 5 to 8500 MHz. This AEC-Q100 Grade 2 qualified switch is designed for automotive, WLAN 802.11 a/b/g/n/ac/ax/be Networks, Bluetooth, Ultra-Wide-Band (UWB), and wireless communication applications. It has an insertion loss of less than 0.81 dB, an isolation of more than 21 dB, and a switching time of 135 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Quadplexer from 2 to 18 GHz | |
Quadplexer
from PLEXSA MANUFACTURING
|
| The QUAD61014TCA from Plexa Manufacturing is RF Quadplexer that has passbands from: 2 to 6 GHz, 6 to 10 GHz, 10 to 14 GHz, and 14 to 18 GHz. It has a return loss of 13 dB, isolation of more than 60 dB, and insertion loss of less than 1 dB. This quadplexer is based on suspended substrate stripline technology and can be used to split a broadband input into five adjacent frequency bands or combine five bands into a single output. |
| |
Download Datasheet
Product Details | |
|
|
|
| Powdered Iron-Based Wireless Charging Transmit and Receive Coils | |
Wireless Charging Coil
from Vishay
|
| The IW Series from Vishay are Wireless Charging Transmit and Receive Coils with inductance values of 6.3 µH/19.6 µH/24 µH. They are optimized for high humidity conditions up to 90% relative humidity (RH). These charging coils incorporate powdered-iron material that makes them immune to temperature fluctuations and sharp inductance drop-off behavior, as observed in ferrite-based solutions. |
| |
Download Datasheet
Product Details | |
|
