| New RF and Microwave Products this Week . |
|
|
| 2-Port USB Controlled Lab Grade VNA from 300 kHz to 6.5 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SC5065 from Copper Mountain Technologies is a modular 2-port compact lab grade VNA that operates from 300 kHz to 6.5 GHz. This small USB Controlled lab grade VNA has higher speeds, more dynamic range, and higher output power, with features like time domain and gating conversion, segmented frequency sweeps, linear/ logarithmic sweeps, power sweeps, multiple trace formats, 16 channels max. with up to 16 traces each, marker math, and limit tests. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 dB Directional Coupler from 1.7 to 20 GHz | |
Directional Coupler
from KRYTAR
|
| The 101720030 from KRYTAR is a Directional Coupler that operates from 1.7 to 20 GHz. It has a coupling of 30 dB and a directivity of more than 10 dB. This coupler can handle an input power of 20 W and a peak input power of 3 kW with a VSWR of less than 1.45:1. It has an insertion loss of less than 1 dB and a frequency selectivity of ± 1.8 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.2 kW, 4-Way Power Splitter/Combiner from 2.4 to 2.5 GHz | |
Power Divider
from Mini Circuits
|
| The COM-2G42G51K0+ from Mini-Circuits is a 4-Way Power Divider/Combiner that operates from 2.4 to 2.5 GHz. It can handle an input power of up to 1.2 kW (as a splitter and combiner), has an insertion loss of less than 0.3 dB and a VSWR of 1.22:1. This non-isolating power divider/combiner has a phase unbalance of ±1° and an amplitude imbalance of ±0.15 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 7 dB Power-Film Chip Attenuator from DC to 18 GHz | |
Fixed Attenuator
from Spectrum Control
|
| The PCAAW-T7 from Inmet by Spectrum Control is a Power-Film Chip Attenuator that operates from DC to 18 GHz. It has an attenuation of 7 dB with an attenuation accuracy of ±0.5 to ±1 dB. This 50-Ohm chip attenuator can handle an average input power of 1 W and has a VSWR of less than 1.50:1. It has an Aluminum Nitride (AlN) substrate and a thin resistor film with Tin-Lead solder termination. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| WR62 High Power Circulator Assembly | |
Waveguide Circulator
from Scientific Microwave Corporation
|
| The WR62 from Scientific Microwave Corporation is a 3-Port Waveguide Circulator that operates from 12 to 18 GHz. It can handle a CW input power of 850 W, has an insertion loss of 1.2 dB, and provides 15 dB of isolation. This REACH-compliant circulator assembly integrates two circulators with a magic tee and a high-power load. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Mouser | | ADF4368 Microwave Wideband Synthesizer | | Analog Devices ADF4368 Microwave Wideband Synthesizer is a high-performance, ultra-low jitter, integer-N, and fractional-N Phase-Locked Loop (PLL) with integrated VCO. The ADF4368 generates an 800MHz to 12.8GHz output frequency range without an internal doubler and doesn’t need sub-harmonic filters. Click here to learn more. | | | |
|
|
| 16-Way Power Divider/Combiner from 700 to 7250 MHz | |
Power Divider
from Vaunix
|
| The LPD-752-16 of Lab Brick® Series from Vaunix is a 16-Way Power Divider/Combiner that operates from 700 to 7250 MHz. It can handle up to 20 W of input power as a power divider and 0.2 W of input power as a combiner. The divider has an insertion loss of less than 4.5 dB and provides isolation over 20 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz Ultra-Portable High Precision & Performance Rubidium Oscillator | |
Rubidium Oscillator
from Safran Electronics & Defense
|
| The mRO-50 from Safran is a 10 MHz Low SWaP-C Miniaturized Rubidium Oscillator that has been designed to meet the latest commercial, military, and aerospace requirements where time stability and power consumption are critical. The clock design is based on the proven rubidium clock heritage at Safran and it has been adapted for low power (0.36 W @ 3.3V) and size. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 dB Fixed Attenuator from DC to 110 GHz | |
Fixed Attenuator
from HYPERLABS
|
| The HL9429 from Hyperlabs is a Fixed Attenuator that operates from DC to 110 GHz. It provides an attenuation of 6 dB with an accuracy of ±1 dB. This ultra-broadband attenuator can handle a maximum input power of 24 dBm, has an amplitude match of ±0.5 dB, and a phase match of 5°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 W GaN Power Amplifier from 7.9 to 8.4 GHz | |
RF Amplifier
from Qorvo
|
| The QPA0708T from Qorvo is a GaN Power Amplifier that operates from 7.9 to 8.4 GHz. It delivers a saturated output power of 48.7 dBm (60 W) with a power gain of up to 37.7 dB and a power-added efficiency of up to 49.4%. This amplifier is fabricated on Qorvo's 0.25 µm GaN on SiC process (QGaN25) and mounted to a high thermal conductivity tab. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 or 2 Piece Drawn-Seamless EMI/RFI Shields | |
Board Level EMI/RFI Shielding Can
from Masach Tech
|
| The MS350-20 Series from Masach are Drawn-Seamless EMI/RFI Shields for high-frequency RF applications. They are available in 1 or 2-piece configurations as a shield, shield with cover, shield with perforated cover, or shield frame made of tin-plated steel or nickel-silver materials. |
| |
Download Datasheet
Product Details | |
|
|
|
| GPS, GLONASS, Galileo, BDS, NavIC, and QZSS Band Smart Antenna Receiver | |
GPS/GNSS Antenna
from Quectel
|
| The QLM29HxAA-GM from Quectel is a Smart Antenna Receiver that supports concurrent reception of L1 and L5 GNSS band signals from GPS, GLONASS, Galileo, BDS, NavIC, and QZSS constellations. It has an AG3335A/T chip and integrated LNA, diplexer, and SAW filters to enhance the receivers’ sensitivity, noise cancellation, and anti-interference capability. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| Low Noise Amplifier from 1164 to 1615 MHz for GNSS Applications | |
RF Amplifier
from Infineon Technologies
|
| The BGA535N6 from Infineon Technologies is a Low Noise Amplifier (LNA) that operates from 1164 to 1615 MHz. It provides a gain of 15.5 dB with a noise figure of less than 1.2 dB. This LNA is based on a broadband design that offers the best sensitivity for GNSS signals in the L1, L2, and L5 bands. It has a simplified dual-band GNSS system design with a single RF path. |
| |
Download Datasheet
Product Details | |
|
|
|
| LoRaWAN IoT Module from 150 to 960 MHz | |
RF Module
from Miromico
|
| The FMLR-61-MAX from Miromico is a LoRaWAN IoT Module that operates from 150 to 960 MHz and supports all major sub-GHz ISM bands worldwide. It delivers an RF output power of up to 14 dBm and has a receiver sensitivity of up to -148 dBm. This module has a line-of-sight range of up to 100 km and supports (G)FSK modulation and LoRa® & long-range FHSS for LPWAN use cases. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wideband Directional Coupler from 20 to 40 GHz | |
Directional Coupler
from Knowles
|
| The FPC07181 from Knowles is a Wideband Directional Coupler that operates from 20 to 40 GHz. It has a coupling value of 18.5 to 21.5 dB, an insertion loss of less than 0.3 dB and directivity of over 14 dB. The coupler is available in a surface-mount package that measures 1.651 x 1.27 x 0.254 mm and is available in Symmetrical and Asymmetrical versions. |
| |
Download Datasheet
Product Details | |
|
|
|
| Phase-Stable and Flexible Cable Assemblies from DC to 50 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The StabilityFlex™ from Maury Microwaves are Phase-Stable Cable Assemblies that operate from DC to 50 GHz. They are available in 24", 36", 48", and 60" lengths (custom lengths available) with N-type, SMA, 2.92mm and 2.4mm connectors. These ultra-flexible cable assemblies have a phase stability vs flexure of ±4°, amplitude stability vs flexure of ±0.05 dB, and provide shielding of more than 100 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bluetooth 5.3 Low Energy (LE) Module | |
RF Module
from Panasonic Corporation
|
| The PAN1783 from Panasonic is a Bluetooth 5.3 Low Energy (LE) Module that operates from 2402 to 2480 MHz. This module delivers a data rate of up to 2 Mbps with Tx power of up to 3 dBm and Rx sensitivity of -104 dBm. It is based on the Nordic nRF5340 SoC featuring two 64 MHz ARM Cortex-M4 processors (one as an application processor and the other as a network processor) with embedded flash memory and internal RAM. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Cryogenic Amplifier from 6 to 8.5 GHz | |
RF Amplifier
from AmpliTech
|
| The APTC3-06000850-2K00-D2-V from AmpliTech is a Low Noise Cryogenic Amplifier that operates from 6.0 to 8.5 GHz. It has been designed for cryogenic applications down to 4K, with an industry-low Noise Figure of 25K at +296K and 2K at 4K case temperatures across the band. It provides a more than 40 dB of gain with a noise figure of less than 0.029 dB (at 4 K) and has a P1dB of -6 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from DC to 22 GHz | |
RF Amplifier
from Z-COMM
|
| The AWB0022M from Z-Communications is a Low Noise Amplifier that operates from DC to 22 GHz. It delivers a gain of 12 dB with a noise figure of 3.5 dB and provides an output P1dB of 19 dBm. This wideband LNA has a return loss of 13 dB at the input and 12 dB at the output. It requires a DC supply of 12 V and consumes 72 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable Analog Signal Generator from 9 kHz to 12/20/26 GHz | |
Signal Generator
from Keysight Technologies
|
| The AP5002A from Keysight Technologies is a Portable Analog Signal Generator that operates from 9 kHz to 12/20/26 GHz. It is designed to accelerate the testing and characterization of electronic or wireless modules either on-site or where the devices are located. This compact signal generator delivers an output power from -120 dBm to +23 dBm and has a frequency step size of 0.001 Hz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Silicon SPST Non-reflective Switch from 100 MHz to 55 GHz | |
RF Switch
from Analog Devices
|
| The ADRF5010 from Analog Devices is a Silicon SPST Non-reflective Switch that operates from 100 MHz to 55 GHz. It has a switching speed of 30 ns, provides an isolation of 30 dB, and an insertion loss of less than 2 dB. This switch can handle an input power of up to 30 dBm (~1 W), a peak input power of 36 dBm (~4 W), and has a return loss of 19 to 22 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 300 W GaN-on-SiC HEMT Power Transistor from 2.4 to 2.5 GHz | |
RF Transistor
from Ampleon
|
| The CLF24H4LS300P from Ampleon is a GaN-on-SiC HEMT Power Transistor that operates from 2400 to 2500 MHz. It delivers an output power of 300 W with a power gain of 14 dB and a drain efficiency of 74%. This transistor is optimized with the best continuous wave (CW) power and efficiency for cooking, industrial, scientific, and medical applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| W-Band Waveguide Power Amplifier from 75 to 110 GHz | |
RF Amplifier
from AT Microwave
|
| The AT-PA-75110-2729 from AT Microwave is a Waveguide Power Amplifier that operates from 75 to 110 GHz. It provides a saturated output power of 29 dBm (~0.8 W) and a small signal gain of 27 dB. This power amplifier is available in two options: LCBT (Low-Cost, Compact, Bench-top) and NHF (No Heatsink or Fan), allowing it to be powered by both AC and DC power supplies and consuming 27 W of power. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bluetooth 5.1 Radio Module from 2360 to 2500 MHz | |
RF Module
from Wurth Elektronik
|
| The Ophelia-III from Wurth Elektronik is a Bluetooth 5.1 Radio Module that operates from 2360 to 2500 MHz. It is based on Nordic’s nRF52840 Bluetooth Low Energy (BLE) SoC that consists of a 32-bit ARM Cortex M4F CPU, 1024 KB flash memory, 256 KB RAM, 2.4 GHz Bluetooth 5.1 radio core. This radio module also incorporates a DC/DC voltage regulator, followed by a high accuracy crystal oscillator, an RF filter, 50-Ohm matching circuit, and an internal PCB antenna. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Wi-Fi 4 & Bluetooth 5.2 Module | |
RF Module
from Quectel
|
| The FCM740D from Quectel is a Wi-Fi 4 & BLE 5.2 Module that operates at 2.4 GHz. It has a 120 MHz BK7231M chipset with an ARM968 MCU, built-in 256 KB SRAM, and 4 MB flash. This module supports IEEE 802.11 b/g/n WLAN standards and complies with WPA-PSK, WPA2-PSK, and WPA3-SAE security standards. It supports PWM and ADC for multiplexing and has several low-power modes and long connection keep-alive mechanisms. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Bluetooth 5.4 Low Energy Module for IoT Applications | |
RF Module
from Insight SiP
|
| The ISP2454 from Insight SiP is a 2.4 GHz Bluetooth 5.4 Low Energy Module that supports Bluetooth Mesh, Thread, and Matter protocols. This module has an 128MHz Arm Cortex-M33 processor and an nRF54L15 Nordic chip (22 nm process node) with 1.5 MB non-volatile memory and 256 KB RAM. It delivers a data rate of up to 4 Mbps with a Tx power of +8 dBm and has an Rx sensitivity of -98 dBm |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 / 5 GHz Wi-Fi and Bluetooth 5.4 Module | |
RF Module
from Murata
|
| The Type 2GF from Murata is a Wi-Fi 802.11a/b/g/n/ac + Bluetooth 5.4 Module that operates at 2.4 and 5 GHz. It delivers a data rate of up to 78 Mbps (Wi-Fi) and up to 3 Mbps (Bluetooth). This module delivers a Tx power of up to 17 dBm and has an Rx sensitivity of up to -98 dBm. It is based on the Infineon CYW43022 combo chipset that implements highly sophisticated enhanced collaborative coexistence hardware mechanisms and algorithms, which ensure that WLAN and Bluetooth collaboration is optimized for maximum performance. |
| |
Download Datasheet
Product Details | |
|
