New 4G/5G Products . |
|
|
Portable Mini Compact Range Test System from 4 to 110 GHz |
Antenna Measurement System
from Microwave Vision Group
|
The CR-M20 from Microwave Vision Group is a Portable Mini Compact Range Test System that operates from 4 to 110 GHz. It is an all-in-one system that has been designed for cost-effective over-the-air (OTA) testing of microwave and mmWave high-gain antennas and radars. This OTA test system consists of a device under test (DUT) positioner, absorber, reflector system, feed horns, rotator, data analysis workstation, positioned controller, mmWave boxes, RF cables, and vector network analyzer (VNA). |
|
Download Datasheet
Product Details | |
|
|
|
Dual-Channel 5G NR Transceiver IC for 5G FR1/FR2 Bands |
RF Transceiver
from MILLIBEAM
|
The FBD01Q from Millibeam is a Dual-Channel 5G NR Transceiver IC that operates in the 5G FR1 Band from 3.1 to 4.2 GHz (n77 Band) and 5G FR2 Band from 26.5 to 29.5 GHz (n257 Band). It enables inter-leaved dual-band phased array solutions for 5G applications such as macro base stations, small cells, and fixed wireless access (FWA) devices. |
|
Download Datasheet
Product Details | |
|
|
|
Dual-Channel Narrowband/Wideband RF Transceiver from 30 to 6000 MHz |
RF Transceiver
from Analog Devices
|
The ADRV9006 from Analog Devices is a 2x2 RF Transceiver that operates from 30 to 6000 MHz, covering the UHF, VHF, cellular frequency bands, and ISM bands. It has dual-channel transmitters, dual-channel receivers with integrated synthesizers, and digital signal processing functions. This transceiver has a Tx/Rx bandwidth from 12 kHz (narrowband) to 40 MHz (wideband). |
|
Download Datasheet
Product Details | |
|
|
|
Beamforming Front-End IC from 26.5 to 29.5 GHz for 5G Phased Array Systems |
Beamforming IC
from Sivers Semiconductors
|
The SUMMIT2629e from Sivers Semiconductors is a Beamforming Front-End IC that operates from 26.5 to 29.5 GHz. It has an eight-channel RF front-end for 5G phased array antenna systems and is fabricated using RF-Silicon on Insulator (RF-SOI) technology. This IC has integrated power amplifiers (PA), low noise amplifiers, T/R switching, beamformers with beam table memory, calibration, gain control, and temperature and power telemetry. |
|
Download Datasheet
Product Details | |
|
|
|
2W GaN Front-End MMIC from 37 to 41 GHz |
Front End Module
from United Monolithic Semiconductors
|
The CHC6094-QKB from United Monolithic Semiconductors is a GaN Front End MMIC that operates from 37 to 41 GHz. It is manufactured on a robust GaN-on-SiC HEMT technology and consists of a high linearity low noise amplifier (LNA), input/output switches, and a linear power amplifier (PA). In the Tx path, it delivers an output power of 33 dBm (~1.99 W) with a gain of 23 dB, while on the Rx path, it provides a gain of 23 dB with a noise figure of 4.8 dB. |
|
Download Datasheet
Product Details | |
|
|
|
20 dBm Driver Amplifier from 20 to 40 GHz |
RF Amplifier
from TMYTEK
|
The Amplifier from TMYTEK is an RF Driver Amplifier that operates from 20 to 40 GHz. It delivers a gain of 15-20 dB and has a noise figure of 7 dB with an output P1dB of 21 dBm (~100 mW). This amplifier has a return loss of -7 dB (input) and -10 dB (output). It has integrated internal DC-DC conversion circuitry for consistent efficiency across its entire input voltage range. |
|
Download Datasheet
Product Details | |
|
|
Featured e-Book | Download Now! | |
|
|
Integrated Front-End Module for 4G LTE/5G NR Applications |
Front End Module
from Skyworks Solutions
|
The SKY58281-21 from Skyworks Solutions is a Front-End Module (FEM) for 4G LTE and 5G NR applications. It consists of an integrated power amplifier (PA), single-ended filters, band select switches, low noise amplifiers (LNA), aMIPI standard digital control block, and an antenna. This FEM utilizes an enhanced architecture that covers multiple bands and meets the spectral linearity and EVM requirements of CP-OFDM and DFTS-OFDM modulations up to 256-QAM. |
|
Download Datasheet
Product Details | |
|
|
|
Double Ridged Horn Antenna from 2.5 to 30 GHz for 5G Applications |
Horn Antenna
from RF SPIN
|
The DRH30C from RF Spin is a Double Ridged Horn Antenna that operates from 2.5 to 30 GHz. This linearly-polarized antenna has an antenna factor from 32 to 40 dB/m. It can handle a CW input power of 25 W, a peak input power of 50 W, and has a VSWR of less than 2.35:1. This antenna is based on a 3D printed patented lens technology, which improves gain and overall performance while maintaining low weight and small size. |
|
Download Datasheet
Product Details | |
|
|
|
Absorptive SPDT Switch from 0.2 to 7.125 GHz |
RF Switch
from Nisshinbo Micro Devices Inc.
|
The NT1819NAAE2S from Nisshinbo Micro Devices Inc. is an Absorptive SPDT Switch that operates from 0.2 to 7.125 GHz. It provides an isolation of 51 to 70 dB and has an insertion loss of less than 1.2 dB. This switch has a switching time of 250 ns and a P0.1dB of +31 dBm. The P1 terminal and P2 terminal of this switch are terminated into 50 Ohms at an unused state to prevent a miss-match when another circuit is connected to this switch. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
5G-NR Bandpass Filter with Passband from 37 to 40 GHz |
Band Pass Filter
from TMYTEK
|
The FT-BPF-n260-C from TMYTEK is a Bandpass Filter with a passband from 37 to 40 GHz covering the 5G-NR n260 band. It has a passband insertion loss of 4 dB and provides 40 dB of rejection both above and below the passband. This filter is available in a RoHS-compliant package that measures 47.78 x 29.33 x 13.74 mm with 2.92 mm (female) connectors and is ideal for 5G communication, SATCOM, or radar applications. |
|
Download Datasheet
Product Details | |
|
|
|
90° Hybrid Coupler from 700 to 1000 MHz for Wireless Applications |
90 Degree Hybrid Coupler
from Johanson Technology
|
The 0850HC47A0300001E from Johanson Technology is a 90° Hybrid Coupler that operates from 700 to 1000 MHz. This 3 dB coupler provides an isolation of more than 23 dB and has an insertion loss of less than 0.14 dB. It can handle a CW input power of up to 300 W and has a return loss of 23 dB. This hybrid coupler has an amplitude balance of up to 0.3 dB and a phase balance of 90°. The 0850HC47A0300001E is available in a surface-mount package measuring 6.35 x 5.08 mm. It is ideal for LTE, 4G, 5G, DCS, and AMPS applications. |
|
Download Datasheet
Product Details | |
|
|
|
Sub-6 GHz Rel-17 Multi-band 5G NR/LTE-FDD/LTE-TDD Modules |
Cellular Module
from SIMCom
|
The SIM8230X from SIMCom are Sub-6 GHz Multi-Band 5G NR/LTE-FDD/LTE-TDD Modules. They have a 3GPP Rel-17 Compliant 5G Standalone architecture, with a downlink data rate of up to 220 Mbps and an uplink data rate of up to 100 Mbps. These modules require a DC supply from 3.3 to 4.4 V. They are available in LGA + LCC packages that measure 30.0 x 30.0 x 2.5 mm and can be controlled via USB 2.0, PCM, I2C, PCIe, and GPIO interfaces. |
|
Download Datasheet
Product Details | |
|
|
|
2-in-1 5G/4G Puck Antenna from 600 to 6000 MHz |
Antenna
from Taoglas
|
The Comet MA322 from Taoglas is a 2-in-1 5G/4G Puck Antenna that operates from 600 to 6000 MHz and also supports legacy 4G, 3G and 2G bands. It has two antenna elements and supports 2x2 MIMO for cellular systems. This antenna delivers a gain of 4.6 dBi and has an efficiency of 64.7%. It has an omnidirectional radiation pattern and is linearly polarized. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Rugged, Vehicle-Mount Sub-6 GHz 5G + Wi-Fi 6 + GNSS Access Point |
Antenna
from Airgain
|
The AirgainConnect® Fleet™ from Airgain is an Integrated Sub-6 GHz Vehicle-Mount Access Point for 5G, Wi-Fi 6 and GNSS connectivity. It supports cellular 5G-NR/4G-LTE connectivity (FR1, Cat 19 DL / Cat 18 UL), dual-band Wi-Fi 6 connectivity (2.4 GHz and 5 – 6 GHz) and GNSS connectivity (L1 band). This integrated solution supports 4x4 downlink and 2x2 uplink MIMO in the cellular chain (supports eSIM) and 2x2 MU-MIMO in the Wi-Fi chain. |
|
Download Datasheet
Product Details | |
|