| Featured Products this Week . |
|
|
| 20 dB Power-Film Chip Attenuator from DC to 0.4 GHz | |
Fixed Attenuator
from Inmet by Spectrum Control
|
| The TPA100-T20 from Spectrum Control is a Power-Film Chip Attenuator that operates from DC to 0.4 GHz. It has an attenuation of 20 dB with an attenuation accuracy of ±0.5 dB. This 50-Ohm can handle an average input power of 100 W and has a VSWR of less than 1.50:1. It has a beryllium oxide-based ceramic substrate, a thick film resistive element, and a tin-over-lead termination. |
| |
Download Datasheet
Product Details | |
|
|
|
| Successive Detection Logarithmic Video Amplifier from 2 to 18 GHz | |
DLVA
from Quantic PMI (Planar Monolithics)
|
| The SDLVA-2G18G-50MV-100-NRF from Quantic PMI (Planar Monolithics) is a Successive Detection Logarithmic Video Amplifier (SDLVA) that operates from 2 to 18 GHz. It has a dynamic range from -67 dBm to +5 dBm, tangential signal sensitivity (TSS) of more than -69 dBm, and a log slope of 50 mV/dB. This SDLVA has a rise time of 6 ns and a fall time of 40 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2.4 mm Male to 2.92 mm Male Adapter from DC to 40 GHz | |
Between Series RF Adapter
from Marki Microwave
|
| The ADPMVMK from Marki Microwave is a 2.4 mm Male to 2.92 mm Male Coaxial Adapter that operates from DC to 40 GHz. It has an insertion loss of 0.19 dB, a return loss of 37 dB, and consumes less than 7.5 A of current. This RoHS-compliant adapter measures (Dia) 8 x (L) 21.3 mm and has a passivated stainless-steel body with gold-plated contacts. It has an EAR99 export classification. |
| |
Download Datasheet
Product Details | |
|
|
|
| Biasable Frequency Doubler from 135 to 160 GHz | |
Frequency Multiplier
from ACST GmbH
|
| The 210A from ACST GmbH is a Biasable Frequency Doubler that converts input frequencies from 67.5 to 80 GHz to output frequencies from 135 to 160 GHz. It can handle an input power of 26 dBm and has a VSWR of less than 1.90:1. This frequency doubler allows for building cost-effective mmWave sources combined with commonly available high-power amplifier MMIC technology. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by Quantic Wenzel | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Cryogenic Circulator from 4 to 12 GHz | |
RF & Microwave Circulator
from QuinStar Technology Inc
|
| The QCY-G0401202 from QuinStar is a Dual Junction Cryogenic Circulator that operates from 4 to 12 GHz. It provides an insertion loss of 0.4 dB with an isolation of 36 dB. The field-displacement device offers exceptional broadband performance down to the mK range. This circulator housing is made of OHFC copper and designed for optimal thermalization. |
| |
Download Datasheet
Product Details | |
|
|
|
| Zigbee, Thread & BLE 5.0 Multi-Stack, Multi-Channel Controller/Transceiver | |
RF Module
from Qorvo
|
| The QPG7015M from Qorvo is a Bluetooth Low Energy (BLE) Multi-Protocol Multi-Channel Communication Controller for set-top boxes, gateways, Zigbee nodes, and other Smart Home devices. This Transceiver is compliant with the IEEE Standard 802.15.4 for Zigbee and Thread, and the Bluetooth Core Specification v 5.0 for Bluetooth Low Energy, providing robust spread spectrum data communication with a highly secure encrypted and authenticated data flow. |
| |
Download Datasheet
Product Details | |
|
|
|
| 729 to 960 MHz Surface Mount Balun | |
Balun
from Johanson Technology
|
| The 0845BL05A0100 is a 1:2 impedance ratio balun (Unbalanced to Balanced Transformer) that operates from 729 to 960 MHz. It has an unbalanced port impedance of 50 ohms and a balanced port impedance of 100 ohms. The balun has an insertion loss of under 0.85 dB, return loss of over 9.5 dB and can handle an input power of up to 2 watts. |
| |
Download Datasheet
Product Details | |
|
|
|
| 548 to 1252 MHzCeramic Notch filter | |
Band Stop Filter
from Networks International Corporation
|
| The 900 MHz Ceramic Notch filter from NIC has a passband from 548 to 1252 MHz. It has an insertion loss of 1.5 dB with a notch bandwidth of 35 MHz. The filter can handle up to 1 W of input power and has an attenuation of 28 dB with a return loss of over 12 dB. It is available with SMA female connectors and measures 2.75 x 1.37 x 0.59 inches. The frequency range can be customized based on a requirement. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bluetooth 5.3 Low Energy (LE) Module | |
RF Module
from Panasonic Corporation
|
| The PAN1783 from Panasonic is a Bluetooth 5.3 Low Energy (LE) Module that operates from 2402 to 2480 MHz. This module delivers a data rate of up to 2 Mbps with Tx power of up to 3 dBm and Rx sensitivity of -104 dBm. It is based on the Nordic nRF5340 SoC featuring two 64 MHz ARM Cortex-M4 processors (one as an application processor and the other as a network processor) with embedded flash memory and internal RAM. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SPDT CMOS Antenna Switch From 0.7 to 5 GHz | |
RF Switch
from Toshiba
|
| The TCWA1225G from Toshiba is an SPDT CMOS Antenna Switch that operates from 0.7 to 5 GHz. It has a switching speed of less than 1.5 µsec, an insertion loss of below 1 dB, and provides more than 40 dB of isolation. The switch can handle up to 24 dBm of input power and 46 dBm of peak power with a VSWR of less than 1.50:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wi-Fi HaLow + MCU SoC from 750 to 950 MHz | |
Wireless Chipset
from Newracom
|
| The NRC7292 from Newracom is a Wi-Fi HaLow + MCU SoC (System on Chip) that operates from 750 to 950 MHz. It supports a data rate of up to 15 Mbps and is compliant with the IEEE 802.11ah Wi-Fi HaLow standards. This SoC has an ARM Cortex-M3 CPU for customer applications and an ARM Cortex-M0 for WLAN. It has a fully integrated on-chip 11ah modem, RF transceiver, processor, and memory. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from 3 to 9 GHz for 5G Massive MIMO Applications | |
RF Amplifier
from Guerrilla RF
|
| The GRF2584 from Guerrilla RF is a Low Noise Amplifier (LNA) that operates from 3 to 9 GHz. It provides a gain of up to 36.5 dB with a noise figure of less than 1.4 dB and has an output P1dB of 17 dBm. This LNA is fabricated on a GaAs pHEMT process and is designed for high-performance wireless infrastructure applications. It requires a DC supply from 2.7 to 5 V and consumes 50 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact Single Row Connector for Defense and Security Applications | |
RF Connector
from Harwin
|
| The Datamate M80-FC305F1-04 from HARWIN is a compact RF Connector that consists of a single row of 4 contacts. It offers space and weight savings over industry-standard alternatives. This connector has Beryllium Copper contacts that deliver proven signal integrity under heavy vibration and shock, maintaining electrical connectivity in a variety of harsh environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| OCXO and OCVXO Series from 6.4 to 40 MHz | |
OCXO
from Connor-Winfield
|
| The OH4 Series from Connor-Winfield are OCXOs and OCVCXOs that operate from 6.4 to 40 MHz. They provide LVCMOS, HCMOS, or Sinewave outputs and have a phase noise of -150 dBc/Hz at 10 kHz offset. These oscillators have frequency stabilities ranging from ±5ppb to ±100ppb over a temperature range from -40 to +85°C. They require 3.3 or 5.0 V of input supply and have a warm-up time of less than 3 minutes. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ceramic 3D Printed GNSS Antenna for L1/E1 Bands | |
GPS/GNSS Antenna
from Anywaves
|
| The Ceramic 3D Printed GNSS L1/E1 Bands Antenna from Anywaves is a GNSS Antenna that operates from 1.563 to 1.587 GHz (GPS LI band) and 1.559 to 1.591 GHz (Galileo E1 band). It delivers a gain of more than 5.5 dBi (at boresight) and operates in a right-hand circular polarization mode to avoid signal blackouts. This GNSS antenna provides an efficiency of more than 95 % and has a reflection coefficient of less than -10 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| NFC Reader SoC with Direct Antenna Connection for IoT Applications | |
RFID Reader IC
from Panthronics
|
| The PTX105R from Panthronics is an NFC Reader System-on-Chip (SoC) that is optimized for IoT devices and networks. It is designed to provide complete NFC reader implementation, including RF physical layer, power management circuit, and on-chip NFC protocol hardware accelerator. This reader SoC can easily achieve interoperability and requires only a small form factor antenna that ensures reliable NFC coupling even in challenging operating environments. |
| |
Download Datasheet
Product Details | |
|
