| Featured Products this Week . |
|
|
| 6 dB Fixed Attenuator from DC to 110 GHz | |
Fixed Attenuator
from HYPERLABS
|
| The HL9429 from Hyperlabs is a Fixed Attenuator that operates from DC to 110 GHz. It provides an attenuation of 6 dB with an accuracy of ±1 dB. This ultra-broadband attenuator can handle a maximum input power of 24 dBm, has an amplitude match of ±0.5 dB, and a phase match of 5°. It is available in a module that measures 1.141 x 0.377 x 0.377 inches with 1.0 mm female/male connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Miniature Chip Inductors from 22 to 51 nH | |
RF Inductor
from Coilcraft
|
| The 0201HL Series from Coilcraft are Ceramic Chip Inductors with inductance values from 22 to 51 nH. These inductors have twice the Q factor when compared to inductors of the same size based on thin-film technology. They have a Self-Resonance Frequency (SRF) from 3.25 to 4.35 GHz and a DC resistance of less than 1.85 Ohms. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 to 20 dB Color-Coded Precision Attenuators from DC to 65 GHz | |
Fixed Attenuator
from Maury Microwave
|
| The ColorConnect Attenuators from Maury Microwave are precision attenuators that operate from DC to 65 GHz. They are available in 1, 3, 6, 10, and 20 dB attenuation values and are the first commercially available attenuators to clearly indicate compatibility and interoperability with the proposed IEEE high-frequency connector/adapter color convention. These precision attenuators can handle an input power of up to 2 W and have a VSWR of less than 1.75:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2 W Fixed Attenuators from DC to 18 GHz | |
Fixed Attenuator
from JFW Industries
|
| The 50HFFA-XXX-2/18 Series from JFW Industries are Fixed Attenuators that operate from DC to 18 GHz. They are available in attenuation values from 1 to 30 dB (1 dB increment) and have a VSWR of less than 1.4:1. These attenuators can handle an average input power of up to 2 W and a peak input power of 100 W (5 µs pulse, 0.1% duty cycle). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Non-PLL RF Signal Generators from 10 MHz to 6 GHz | |
Signal Generator
from Boonton
|
| The SGX1000 Series from Maury Microwave are RF Signal Generators that operate from 10 MHz to 6 GHz. They deliver an output power from -50 dBm to +18 dBm with a power resolution of 0.01 dB and have a frequency step size of 0.001 Hz. These signal generators utilize a unique non-phase locked loop (PLL) design with a digital front-end and direct, proprietary back-end. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by SV Microwave | | |
|
|
| 600 W Solid State Power Amplifier from 0.7 to 6.0 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2030-500-LC from Exodus Advanced Communications is a Solid State Power Amplifier that operates from 0.7 to 6.0 GHz. It delivers a saturated output power of 600 W (CW or Pulsed) and a power gain of over 57 dB. This amplifier has a Class A/AB linear design with spurious emissions of better than -60 dBc and harmonics of -20 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 dB 8-Bit Digital Attenuator from 8 to 18 GHz | |
RF Variable Attenuator
from Quantic PMI (Planar Monolithics)
|
| The PDVAN-8018-60-8-OPT25dBM from Planar Monolithics Industries is an 8-bit Digital Attenuator that operates from 8 to 18 GHz. It provides an attenuation range of 60 dB with a 0.25 dB step size using an 8-bit binary TTL control and has a switching speed of less than 800 ns. The attenuator can handle a CW input power up to 30 dBm, has an insertion loss of less than 5 dB and a VSWR of under 2:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Power Sensor from 10 MHz to 8 GHz | |
RF Power Meter & Sensor
from LadyBug Technologies
|
| The LB479A from LadyBug Technologies is an RF Power Sensor that operates from 10 MHz to 8 GHz. It has a dynamic range of -60 to +20 dBm and an accuracy of up to 7%. This power sensor can handle a peak CW/pulsed power of up to +23 dBm and has a VSWR of less than 1.15:1. It has a video bandwidth of 10 MHz, an effective sample rate of 48 MS/s, and a measurement speed of 2000/s. |
| |
Download Datasheet
Product Details | |
|
|
|
| WR-6.5 Hybrid Circulator from 110 to 170 GHz | |
Waveguide Circulator
from Micro Harmonics
|
| The HC065F from Micro Harmonics is a Hybrid Circulator that operates from 110 to 170 GHz. It has an insertion loss of 1.2 dB and provides an isolation of more than 17 dB. This circulator can handle an input power of up to 3 W and has a VSWR of 1.40:1. It is based on a patent-pending design and combines an orthomode transducer with a Faraday rotator to achieve the bandwidth of the full waveguide band. |
| |
Download Datasheet
Product Details | |
|
|
|
| EMI Patches for Blocking Electric/Magnetic Fields from 100 Hz to 25 GHz | |
Microwave Absorber
from Wurth Elektronik
|
| The WE-EMIP EMI Patch from Wurth Elektronik are EMI Patches that operate from 100 Hz to 25 GHz. These EMI patches offer a universal solution with a more comprehensive operating frequency range and higher attenuation capability than conventional absorber sheets. They are supported by a hybrid material containing both absorber and metal layers (Aluminum) that can effectively block electric and magnetic fields. |
| |
Download Datasheet
Product Details | |
|
|
|
| Microwave Measurement Receiver from 2 Hz to 8/26.5/50 GHz | |
RF Spectrum Analyzer
from Rohde & Schwarz
|
| The FSMR3000 from Rohde & Schwarz is a Microwave Measurement Receiver that operates from 2 Hz to 8/26.5/50 GHz. It has been developed to calibrate signal generators and attenuators. The receiver provides tuned RF level measurements, level measurements, analog/frequency/phase modulations, and spectrum analysis. This calibration/verification device can measure power levels from –152 to 30 dBm and has a sensitivity of -120 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface Mount RF Circulator from 3400 to 3600 MHz | |
RF & Microwave Circulator
from TDK
|
| The CU4S0508AC-3600-00 from TDK Corporation is a Circulator that operates from 3400 to 3600 MHz. It has an insertion loss of less than 1.2 dB, isolation of over 10 dB, and can handle up to 5 watts of power. This circulator has a clockwise direction of circulation and has a VSWR of 2:1. It is available in a surface-mount package that measures 5.2 (L) x 5 (W) x 2.5 (T) mm and can be used for commercial-grade applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Power Amplifier from 3300 to 3800 MHz for 5G-NR/4G-LTE Applications | |
RF Amplifier
from Skyworks Solutions
|
| The SKY66524-11 from Skyworks is a Power Amplifier that operates from 3300 to 3800 MHz. It has an instantaneous bandwidth of 400 MHz and provides a gain of 33 dB with a power-added efficiency (PAE) of 27%. This power amplifier has an integrated active bias circuitry that compensates PA performance over temperature, voltage, and process variation. It is available in a 16-pin package that measures 5.00 x 5.00 x 1.04 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1:1 Transmission Line Balun from 5 MHz to 10 GHz | |
Balun
from MACOM
|
| The MABA-011108 from Macom is a 1:1 balun transformer that operates from 5 MHz to 10 GHz. The balun has an insertion loss of under 2.9 dB, return loss of over 5 dB and can handle an input power of up to 1 watt. It has excellent amplitude balance and is available in tape and reel. This balun is ideal for a wide range of applications including Cellular, Wideband Differential Amplifiers, Analog-to-digital Converters, Mixers, and Differential Modulators. |
| |
Download Datasheet
Product Details | |
|
|
|
| Zigbee/Thread/Bluetooth (LE) 5.0 Smart Home Communications Controller | |
Wireless Chipset
from Qorvo
|
| The QPG6095 from Qorvo is a 2.4 GHz Smart Home Communications Controller that supports Zigbee, Thread and Bluetooth Low Energy. It is compliant with the IEEE Standard 802.15.4 for Zigbee and Thread, and the Bluetooth Core Specification v5.0 for Bluetooth Low Energy. The integrated multi-stack, multi-protocol support enables vendors to operate multiple protocols on different channels, enabling innovative new applications combining Zigbee, Thread and Bluetooth Low Energy in one product. |
| |
Download Datasheet
Product Details | |
|
|
|
| Space-Qualified OCXO from 130 to 400 MHz for LEO/MEO Applications | |
OCXO
from AXTAL
|
| The AXIOM75SHM from AXTAL is a Space COTS Oven-Controlled Crystal Oscillator (OCXO) that operates from 130 to 400 MHz. It provides a sinewave output waveforms with a phase noise of -150 dBc/Hz (at 1 kHz offset) and a frequency stability of ±50 ppb (vs. temperature). This space-qualified OCXO is manufactured according to MIL-PRF-55310 Level S requirements for high reliability and can withstand a total ionizing dose of 40 krad (Si). |
| |
Download Datasheet
Product Details | |
|
|
|
| Double Ridged Horn Antenna from 2.5 to 30 GHz | |
Horn Antenna
from RF SPIN
|
| The DRH30C from RF Spin is a Double Ridged Horn Antenna that operates from 2.5 to 30 GHz. This linearly-polarized antenna has an antenna factor from 32 to 40 dB/m. It can handle a CW input power of 25 W, a peak input power of 50 W, and has a VSWR of less than 2.35:1. This antenna is based on a 3D printed patented lens technology, which improves gain and overall performance while maintaining low weight and small size. |
| |
Download Datasheet
Product Details | |
|
|
|
| GPS, GLONASS, Galileo, BDS, NavIC, and QZSS Band Smart Antenna Receiver | |
GPS/GNSS Antenna
from Quectel
|
| The QLM29HxAA-GM from Quectel is a Smart Antenna Receiver that supports concurrent reception of L1 and L5 GNSS band signals from GPS, GLONASS, Galileo, BDS, NavIC, and QZSS constellations. It has an AG3335A/T chip and integrated LNA, diplexer, and SAW filters to enhance the receivers’ sensitivity, noise cancellation, and anti-interference capability. |
| |
Download Datasheet
Product Details | |
|
|
|
| Flexible VNA Cable Assembly from DC to 65 GHz | |
RF Cable Assembly
from Waka Manufacturing
|
| The AM1KVMVM from Waka Manufacturing is a Flexible VNA Cable Assembly that operates from DC to 65 GHz. It has an insertion loss of 4.95 dB (at 65 GHz) and a VSWR of 1.60:1. It offers high durability, phase-stability, and flexibility along with low insertion loss. This cable assembly has an outer diameter of 4 mm and a minimum bend radius of 15 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| SMA-to-SMPM Coaxial Adapters from DC to 26.5 GHz | |
Between Series RF Adapter
from Cinch Connectivity Solutions
|
| The 134-1001-00X from Cinch Connectivity Solutions are SMA-to-SMPM Between Series RF Adapters that operate from DC to 26.5 GHz. They have a VSWR of less than 1.25:1 and are designed to provide high-quality signal transmission from one connector series to another. They are fully matched to 50 ohms on both sides. |
| |
Download Datasheet
Product Details | |
|
|
|
| Passive GaAs Double Balanced Mixer MMIC from 18 to 86 GHz | |
RF Mixer
from Marki Microwave
|
| The MM1-1886HCSP2 from Marki Microwave is a Passive GaAs Double Balanced Mixer MMIC with an RF/LO frequency from 18 to 86 GHz and an IF frequency from DC to 27 GHz. It has a conversion loss of 14 dB and can handle an input power of +15 dBm. This mixer provides an LO-to-RF isolation of 40 dB, an LO-to-IF isolation of 30 dB, and an RF-to-IF isolation of 40 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W GaN Power Amplifier Pallet from 2.4 to 2.5 GHz | |
RF Amplifier
from RFHIC
|
| The RRP2425100-50 from RFHIC is a GaN Power Amplifier Pallet that operates from 2.4 to 2.5 GHz. It delivers a CW output power of 100 W with a power gain of 50 dB and an efficiency of 45%. This power amplifier is fabricated using RFHIC’s GaN high-electron-mobility (HEMT) technology and has a VSWR of less than 2.0:1. It has spurious levels of better than 60 dBc and harmonic levels of 10 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Profile 5G/LTE Antenna from 698 to 3800 MHz | |
Antenna
from Maxtena
|
| The MEA-698-3800-SM from Maxtena is a 5G/LTE Antenna that operates from 698 to 3800 MHz. This vertically-polarized antenna provides a gain of 2 dBi and has a VSWR of less than 2.5:1. It provides multiple input multiple output (MIMO) functionality for 2G, 3G, 4G, and 5G communications. This omni-directional, low-profile antenna delivers industry-leading wideband performance and optimal coverage. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12-Port Multi-Beam Base Station Antenna from 698 to 960 MHz | |
Base Station Antenna
from MatSing
|
| The MS-MBA-3-L4A2 from MatSing is a 12-port Multi-Beam Base Station Lens Antenna that operates from 698 – 960 MHz (L-band). It is based on MatSing’s patented spherical lens technology that supports 3-isolated low-frequency, cross-polarized beams. This dual-slant ±45° polarized antenna provides a gain of 18 dBi with a horizontal beamwidth of 24° and vertical beamwidth of 15° each. |
| |
Download Datasheet
Product Details | |
|
