| New IoT Products |
|
|
| Wi-Fi HaLow 802.11ah Module from 902 to 928 MHz | |
RF Module
from Murata
|
| The Type 2HK from Murata is a Wi-Fi HaLow 802.11ah Module that operates from 902 to 928 MHz. This module uses Wi-Fi HaLow technology to provide a data rate of up to 15 Mbps at distances of more than 2 km. It has a Tx power of +23 dBm and a bandwidth of 1, 2 or 4 MHz. This module requires a DC supply of 2.7 to 3.6 V and incorporates advanced power-saving features to significantly reduce power consumption and greatly extend the battery life of connected devices. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Wireless SoC for Bluetooth 6.0 and IEEE 802.15.4 | |
Wireless Chipset
from Nordic Semiconductor
|
| The nRF54L10 from Nordic Semiconductors is a Wireless SoC that operates at 2.4 GHz and supports Bluetooth 6.0, Bluetooth Low Energy, Bluetooth Mesh, IEEE 802.15.4-2020, Zigbee, Thread, Matter, Amazon Sidewalk, and proprietary 2.4 GHz protocols. It comprises of a multiprotocol 2.4 GHz radio and MCU with a 128 MHz Arm® Cortex-M33 processor, 128 MHz RISC-V coprocessor, NVM memory of 1.0 MB and 192 KB RAM. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4G/GNSS/Wi-Fi 3-in-1 Combo Antenna 700 to 7125 MHz | |
Antenna
from Quectel
|
| The YEMD302L1A from Quectel is a 4G/GNSS/Wi-Fi 3-in-1 Combo Antenna that operates from 700-960 MHz/1710-2690 MHz (4G), 2400-2500 MHz/5150-5850 MHz/5925-7125 MHz (Wi-Fi), and 1565-1606 MHz (GNSS). This antenna is designed for applications requiring the antenna to be discrete and it offers backward-compatibility to support 2G, 3G, LTE Cat-M, and NB-IoT. |
| |
Download Datasheet
Product Details | |
|
|
|
| Secure Wi-Fi 6 and Bluetooth 5.4 Multi-Radio Modules | |
RF Module
from u-blox AG
|
| The MAYA-W4 Series from u-blox are Wi-Fi 6 and Bluetooth 5.4 Multi-Radio Modules that are designed and tested to meet the high reliability and quality requirements of industrial and commercial applications. They are based on NXP’s IW610x chipsets. These cost-efficient modules provide 1x1 SISO Wi-Fi 6 operation with multi-user-MIMO technology over a channel bandwidth of 20 MHz for improved network availability in dense environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3GPP Release 10-Compliant LTE Cat 4 Modules with 2G Fallback | |
Cellular Module
from Cavli Wireless
|
| The CQS315 (C-Series) from Cavli Wireless are LTE Cat 4 Modules with 2G fallback that are designed to meet a broad range of IoT application requirements. They comply with 3GPP Release 10 standards and are based on Octa-core Kryo 260 CPU and an Adreno 610 GPU, thereby offering enhanced graphics performance, efficient power usage, and high-quality imaging. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by DesignCon 2024 | | |
|
|
| Wi-Fi 6 and Bluetooth LE 5.4 A-IoT Module with Integrated AI/ML Acceleration | |
RF Module
from SparkLAN
|
| The WL72917_8M from SparkLAN is a Wi-Fi 6 and Bluetooth Low Energy (BLE) 5.4 A-IoT Module that is designed to provide reliable wireless connectivity and enhanced energy efficiency for the next-generation A-IoT applications. It is powered by Silicon Labs’ chipset and consists of an ARM Cortex-M4F core running at up to 180 MHz, an AI/ML hardware acceleration, 672 KB SRAM, 16 MB external PSRAM, and an 8 MB flash memory. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE Cat. M1/NB1 and Sigfox LPWA Module from 600 MHz to 2.7 GHz | |
Cellular Module
from GCT Semiconductor
|
| The GDM7243i from GCT is an LTE Cat. M1/NB1 and Sigfox LPWA Module that operates from 600 to 960 MHz and 1.7 to 2.7 GHz. It complies with the 3GPP Release 13 LTE Advanced Pro standard and has various hybrid connectivity modes supporting Cat. M1, NB1, GSM, BLE, GPS and Sigfox. This module has a high-performance Cortex-R4 MCU with an integrated RF transceiver, baseband, and 2 MB SRAM. |
| |
Download Datasheet
Product Details | |
|
|
|
| Omnidirectional 5G + Wi-Fi 6E Antenna from 617 to 7200 MHz | |
Antenna
from Mobile Mark
|
| The ECO-600/7200 from Mobile Mark is an RF Antenna that operates from 617 to 960 MHz (5G cellular band) and 1710 to 7200 MHz (Wi-Fi band). This omni-directional antenna provides a peak gain of up to 7 dBi and can handle an input power of up to 10 W with a VSWR of less than 3.0:1. It also covers other cellular frequency bands, including the CBRS Band 48/71 and FirstNet public safety (LTE Band 14). |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz Wi-Fi 7 (802.11be) Front End Module | |
Front End Module
from Qorvo
|
| The QPF4202 from Qorvo is a Wi-Fi 7 (802.11be) Front End Module that operates from 2412 to 2484 MHz. It consists of a 2.4 GHz power amplifier (PA), single pole two throw switch (SP2T), and bypassable low noise amplifier (LNA) into a single device. This FEM also has an RF output coupler, a broad-range constant slope voltage logarithmic power detector for precise power control, and digital pre-distortion (DPD) for enhanced linear output power and throughput. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 13.56 MHz HF RFID Tag IC for IoT Applications | |
RFID Tag IC
from NXP Semiconductors
|
| The ICODE 3 from NXP Semiconductors is a High Frequency (HF) RFID Tag IC that operates at 13.56 MHz. It is designed to operate from long-range HF-RFID readers and NFC phones, to support cross-range operations across manufacture, supply, and usage chains. It is fully compatible with the ISO/IEC 15693 standard and NFC Forum Type 5 tag. This RFID tag has 2432 bits of EEPROM user memory with optional password protection and a 97 pF internal tuning capacitance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5 GHz Wi-Fi 6 + Bluetooth 5.4 LE Combo IC for IoT Applications | |
Wireless Chipset
from Infineon Technologies
|
| The CYW55512 from Infineon Technologies is a Dual-Band 2.4/5 GHz Wi-Fi 6 and Bluetooth Low Energy (BLE) 5.4 Combo IC. It offers a cost-effective balance of advanced Wi-Fi 6 and Bluetooth/BLE features with a power efficient design for IoT connectivity needs. This Wireless SoC has a 192 MHz Cortex CM33 core processor and supports OFDMA, MU-MIMO, TWT, BSS Coloring and DCM technologies. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3GPP Rel-17 5G RedCap Modules with Integrated L1+L5 Band GNSS | |
Cellular Module
from Quectel
|
| The RG255C Series from Quectel are 5G RedCap Modules based on 3GPP Release 17 RedCap technology. They support 5G standalone (SA) modes and are backward-compatible with the 4G network. These modules support a theoretical peak data rate of 150 Mbps (downlink) and 50 Mbps (uplink), while also supporting advanced 5G features such as URLLC and power saving. |
| |
Download Datasheet
Product Details | |
|
|
|
| DECT NR+ and Cellular IoT System-in-Package with Built-in GNSS Support | |
Cellular Module
from Nordic Semiconductor
|
| The nRF9131 from Nordic Semiconductors is a DECT NR+ and Cellular IoT System-in-Package (SiP) designed to support DECT NR+ and cellular operations utilizing the same LTE stack as nRF9161. It is certified for global operations and simplifies traditional chipset-based designs by offering a smaller form factor, making the SiP ideal for high-volume cellular IoT applications. |
| |
Download Datasheet
Product Details | |
|
