PREV 30 May, 2016 NEXT

Top Stories & Products from IMS 2016

30 May, 2016 - everything RF Newsletter
 
everything RF
Date: 30 May, 2016
 
See Complete IMS 2016 Coverage on everything RF
 
 
 
Top News Stories from IMS 2016
Compact and Affordable Millimeter-wave Frequency Extension Solutions - Copper Mountain Technologies
The World’s First 94 GHz Transmit and Receive Chipsets for Commercial Applications - Arralis
Peregrine Introduces Monolithic Beamforming Device for X-Band Radar Applications - Peregrine Semi
Ampleon Introduces PA Solutions for Small Cells and Massive MIMO Applications - Ampleon
ADI Simplifies Wireless System Design with the Introduction of RadioVerse - Analog Devices
Plug and Play, RF Cooking Module Reduces Time-to-Market for Appliance OEMs - NXP
Plastic-packaged GaN Power Transistors with 79% Efficiency for Wireless Basestations - MACOM
Qorvo 15W GaN Transistor Passes Highly Accelerated Temperature/Humidity Stress Test - Qorvo
Qorvo Demonstrates Ultra-Wideband Linearization for Massive MIMO Applications - Qorvo
CST Preview the Upcoming Conjugate Heat Transfer Solver at IMS 2016 - CST
MATLAB Updated RF Toolbox to Support Digitally-Assisted RF MIMO Systems - MathWorks
Infineon & IMEC Develop 79 GHz CMOS Automotive Radar Sensor Chips - Infineon
Skyworks Front-End Module Powers GPS Enabled Tracking Device - Skyworks
COMSOL Software Provides a Competitive Edge When Developing 5G and IoT Solutions - Comsol
NXP Introduces LDMOS RFICs for Outdoor Small Cell Base Stations - NXP
Highly Efficient CMOS Power Amplifiers for 5G Cell Phones - Purdue University
More News
Event Coverage
Event Image
IMS 2016 Event Coverage

Date: 22 to 27 May, 2016

Location: San Francisco, California

 
More Upcoming events
Featured White Paper
Keysight
Achieve Fast, Accurate Multi-Channel Power Measurements for Wireless Manufacturing
New chipsets are designed to handle wider power ranges to support higher data throughput and a wider coverage area. In addition to good repeatability, fast measurement speed and high accuracy, obtaining a wide power measurement range is now a key requirement in RF power measurements for wireless chipset or power amplifier manufacturing. Click here to learn more.
 
 
 
Products Showcased at IMS 2016
RF Mixer
RF SOI Image Reject Mixer from 10 to 19 GHz

RF Mixer from Peregrine Semiconductor

The UltraCMOS PE41901 is a SOI based passive double-balanced, Ku band mixer with image rejection. It integrates two mixers, a local oscillator (LO) path 90-degree coupler and RF port baluns on a single die.
 
Download Datasheet | Product Details
 
Power Divider
2 Way Iso-Divider for K Band Applications

Power Divider from Crane Aerospace & Electronics

This Iso-Divider from Crane Aerospace is a 2-Way K band power divider with an integrated isolator that operates from 18.2 to 22.2 GHz. It is a higher isolation power divider which removes the need to additional components and connectors.
 
Download Datasheet | Product Details
 
RF Switch
Absorptive SP4T Pin Diode Switch from 0.1 to 50 GHz

RF Switch from Planar Monolithics Industries

The P4T-100M50G-100-T-RD from Planar Monolithics is a SP4T switch that operates from 0.1 to 50.0 GHz. This absorptive pin diode switch has a low insertion loss, high isolation and can handle up to 20 dBm of power. It requires a supply voltage of -5V/+5 V and has a switching speed of 50 ns.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
Programmable Attenuator System from 200 MHz to 6 GHz

RF Variable Attenuator from JFW Industries

The 50PA-847 from JFW Industries is a programmable attenuator assembly that contains 24 attenuators. They operate from 200 MHz to 6 GHz with each one having a attenuation range of 95 dB in 1 dB steps. Each attenuator can be controlled individually (set attenuator command) or as a group (block command, set block command).
 
Download Datasheet | Product Details
 
RF Variable Attenuator
4 Channel USB Programmable Attenuator from 0.5 to 6 GHz

RF Variable Attenuator from Adaura Technologies

Adaura Technologies AD-USB4A series of digital programmable attenuators operate from 0.5 to 6 GHz. The attenuators have a range from 0 to 63 dB with 1 dB increments. Four independent channels can be controlled and powered via one single USB port. An easy to use GUI provides fixed attenuation as well as flexible ramp functions.
 
Download Datasheet | Product Details
 
Digital Phase Shifter
12-Bit RF Digital Phase Shifter from 4 to 8 GHz

Digital Phase Shifter from Telemakus

TEP8000-6 is a laboratory quality RF Digital Phase Shifter that operates from 4 to 8 GHz. The device has a phase range of 360° with an insertion loss of 5 dB. This 12-bit phase shifter has a 0.25 dB resolution and can handle up to 20 dBm of power. It can be controlled and powered via a USB interface using any Windows XP or 7 PC using a easy to use GUI.
 
Download Datasheet | Product Details
 
RF Amplifier
300 Watt, X-Band GaN Pulsed Power Amplifier

RF Amplifier from Diamond Microwave

The DM-X300-01 from Diamond Microwave is an X-band GaN pulsed power amplifier that operates from 8.4 to 9.6 GHz. It provides a peak output power of 300 Watts with a gain of 55 dB and PAE of 30%. This amplifier has been developed as an alternative to traveling wave tube (TWT) amplifiers and is ideal for use in defense, aerospace and communication applications.
 
Download Datasheet | Product Details
 
Signal Generator
100 MHz to 20 GHz VCO-Based Synthesized Signal Source

Signal Generator from SignalCore

The SC5511A from SignalCore is a compact, high-performance VCO-based synthesized signal source that can generate signals from 100 MHz to 20 GHz. It generates signals with an output power from -30 dBm to 10 dBm with a low phase noise.
 
Download Datasheet | Product Details
 
Software
3D EM Simulation Software for High-Fidelity Computations

Software from Remcom

XFdtd is a full wave 3D EM solver that simplifies the analysis of complex EM problems and leads the market in FDTD-based modeling and simulation. With unrivaled speed, XF is the leader for complex, high-fidelity EM simulations.
 
Download Datasheet | Product Details
 
RF Amplifier
2 to 20 GHz SSPA for EW and Communication Systems

RF Amplifier from Exodus Advanced Communications

The AMP1074 from Exodus Advanced Communications is a solid state power amplifier that operates from 2 to 20 GHz. It provides a saturated power of 10 Watts and requires a supply of 32 VDC while drawing up to 4 A of current.
 
Download Datasheet | Product Details
 
RF Amplifier
Linear Power Amplifier for 3G/4G/LTE Small Cell Base Stations

RF Amplifier from Skyworks

The SKY66185-11 from Skyworks is a power amplifier that operates from 851 to 894 MHz. This fully matched Power amplifier has bee designed for FDD 3G/4G LTE small cell base stations. It has an active biasing circuitry integrated to compensate for PA performance over temperature, voltage, and process variation as well as an internal coupler for power monitoring.
 
Download Datasheet | Product Details
 
RF Transistor
220 Watt Doherty Transistor from 2.5 to 2.6 GHz

RF Transistor from Qorvo

The QPD2730 from Qorvo is an asymmetric doherty power transistor that operates from 2.575 to 2.635 GHz. It delivers a peak doherty power of 223 Watts, an average power of 36 Watts with a gain of 15.9 dB and drain efficiency of 53%. The transistor is available in a 4-lead, earless, ceramic flange N1780 package and is suitable for a wide variety of applications including W-CDMA/LTE, Macrocell Base Station and Active antenna.
 
Download Datasheet | Product Details
 
RF Mixer
5 GHz to 21 GHz RF Mixer with Integrated Balun

RF Mixer from Mini Circuits

The MDB-24H+ is a frequency mixer with an RF/LO frequency from 5 GHz to 21.5 GHz and IF frequency from 0 to 5 GHz. The mixer is fabricated using InGaP HBT technology with integrated LO and RF Baluns. The mixer measures 4 mm x 4 mm x 1 mm and is available in a surface mount package.
 
Download Datasheet | Product Details
 
Switch Matrix
4 x 256 Switch Matrix 0.9 to 2.5 GHz

Switch Matrix from Corry Micronics

The RFMS-4X256-B from Corry Micronics is a 4 x 256 Switch Matrix that operates from 0.9 to 2.5 GHz. It allows 4 RF common ports to be routed to any of 256 RF Ports. Switching can be manually set via a the display on the front panel or over Ethernet or USB ports using a TCP/IP protocol provided with the unit.
 
Download Datasheet | Product Details
 
RF Amplifier
GaN L-Band Amplifier Pallet for Radar Applications

RF Amplifier from Integra Technologies, Inc.

The IGNP1214M1300-GPS from Integra is a GaN L-Band Amplifier Pallet that operates from 1200 MHz to 1400 MHz. The pallet supplies a minimum of 1300 Watts of peak output power with gain of over 12 dB and efficiency 55% from a 50V supply voltage.
 
Product Details
 
Power Divider
2 Way Wilkinson Power Divider from 4 GHz to 40 GHz

Power Divider from Marki Microwave

The PD-0450 is a 2 Way Wilkinson power divider/combiner that operates from 5 GHz to 40 GHz. Marki Wilkinson power dividers/combiners feature a unique CAD optimized design for industry leading bandwidth, isolation, and balance. The PD-0440 is available as a module with connectors and can also be packaged in a surface mount package.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Handheld RF/Microwave Analyzer from 4 to 50 GHz

RF Spectrum Analyzer from Keysight Technologies

The FieldFox Handheld RF and Microwave Analyzers from Keysight are available in a number of frequency options from 4 GHz to 50 GHz. These handhelp analyzers provide precise measurements which are comparable with benchtop equipment.
 
Download Datasheet | Product Details
 
Featured White Paper
Keysight
Faster Measurement Results with PXI Multi-Module Instrument Drivers
PXI test instruments can consist of multiple PXI modules combined to create a multi-module instrument (MMI). This application note explores the significant advantages offered by MMIs - configuration flexibility, interchangeability and usability. It also provides a number of helpful tips to reference when implementing and using MMI drivers. Click to learn more.
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.