1. everything RF
  2. RF Newsletters
more
PREV 27 July, 2016 NEXT

New RF & Microwave Products this Week

July 27, 2016 - everything RF Newsletter
 
everything RF
Date: July 27, 2016
 
Sponsored by Digi-key Electronics
 
 
 
New RF & Microwave Products this Week
Vector Network Analyzer
16 Port Vector Network Analyzer from 100 kHz to 20 GHz

Vector Network Analyzer from Rohde & Schwarz

The R&S ZNBT20 is a vector network analyzer that enables users to characterize devices under test with multiple test ports. This particular analyzer has 16 ports which enables production lines to maintain high throughput by measuring multiple DUTs in parallel.
 
Download Datasheet | Product Details
 
Laminate
High Performance, Low Cost Antenna-Grade Laminate

Laminate from Rogers Corporation

The RO4700 laminates from Rogers Corporation are antenna-grade laminates, fully compatible with conventional FR-4 and high temperature lead-free solder processing and do not require the special treatment needed on traditional PTFE-based laminates for plated through hole preparation.
 
Download Datasheet | Product Details
 
Transceiver
24 GHz Transceiver for Industrial Sensors & Automotive Applications

Transceiver from United Monolithic Semiconductors

The CHC2442-QPG from UMS is a transceiver designed for signal generaion and dual reception for automotive radar applications and industrial sensors in the 24 GHz ISM band. The transceiver operates from 24 to 24.5 GHz, integrates a low phase noise VCO, Tx MPA, two Gilbert based heterodyne Rx and a switchable prescaler.
 
Download Datasheet | Product Details
 
RF Amplifier
100 Watt X-band MMIC Amplifier from 7.9 to 11 GHz

RF Amplifier from Qorvo

The TGM2635–CP from Qorvo is a X-band MMIC amplifier that operates from 7.9 to 11 GHz. It delivers an output power of 100 Watts with a power gain of over 22.5 dB and a PAE of more than 35%. This amplifier requires a supply volatge of 28 Volts and consumes 1.3 Amps of current.
 
Download Datasheet | Product Details
 
RF Transistor
50 W RF Power GaN Transistor from 2496 to 2690 MHz

RF Transistor from NXP Semiconductors

The A2G26H281-04S from NXP Semiconductors is asymmetrical Doherty RF power GaN transistor that operates from 2496 to 2690 MHz. It delivers an output power of 50 Watts with a gain of 15.3 dB and drain efficiency of 57%. This transistor requires a supply voltage of 48 Volts DC and consumes 150 mA of current.
 
Download Datasheet | Product Details
 
Waveguide Mixer
Sub Harmonic Mixer from 172 to 204 GHz

Waveguide Mixer from Renaissance Electronics Corporation

The HSHM0504 from Renaissance ia a sub harmonic mixer with an IF Frequency from 0.2 to 4 GHz and RF Frequency from 172 to 204 GHz. This mixer has a conversion loss under 6.5 dB and LO frequency from 84 to 100 GHz. This mixer is ideal for heterodyne receivers, instrumentation and imaging front end applications.
 
Download Datasheet | Product Details
 
Sponsored by Digi-key Electronics
BGM113
Silicon Labs Blue Gecko BGM113 Bluetooth® Smart Module
Silicon Labs’ Blue Gecko BGM113 is a fully integrated, certified Bluetooth low-energy module ideally suited for low-power, short-range wireless applications. The BGM113 module combines a 2.4 GHz Blue Gecko wireless SoC, a high-efficiency chip antenna, and Bluetooth 4.1-compliant software stack. Click to learn more.
 
 
 
GPS/GNSS Module
Compact Cellular Module for W-CDMA(UMTS) & GPRS/EDGE

GPS/GNSS Module from u-blox AG

The LISA-U2 modules from u-blox provide worldwide coverage with 6-band W-CDMA (UMTS) and quad-band GPRS/EDGE support. They have HSDPA data-rates of up to 21.1 Mb/s (downlink), and HSUPA of up to 5.76 Mb/s (uplink). These modules provide fully integrated access to u-blox positioning products and migration from u-blox SARA, LEON, and other LISA modules is simple.
 
Download Datasheet | Product Details
 
GPS/GNSS Module
Automotive Dead Reckoning Module Including 3D sensors

GPS/GNSS Module from u-blox AG

The NEO-M8L Automotive Dead Reckoning (ADR) module from u-blox includes integrated motion, direction and elevation sensors. The module integrates gyro and accelerometer with the u-blox M8 GNSS platform to achieve a high performance indoor/outdoor positioning solution for all road vehicle and high-accuracy navigation applications.
 
Download Datasheet | Product Details
 
Antenna
4.9 to 6 GHz SMD Antenna for 802.11 Applications

Antenna from Antenova

The SRC5G027 from Antenova is an ultra-compact ceramic antenna for Wi-Fi applications. This linearly polarized antenna operates from 4.9 to 6 GHz with a gain of 3.5 dBi and an efficiency over 60%. It is designed for integration and is ideal for MIMO antenna systems.
 
Download Datasheet | Product Details
 
Antenna
Dual-band Wi-Fi Antenna Ideal for Wearables

Antenna from Antenova

The SR42W009 from Antenova is a dual-band antenna manufactured from FR4 materials operating in both Wi-Fi bands, 2.4 to 2.5 GHz and 5.17 to 5.84 GHz. This linearly polarized antenna is designed for integration and is ideal for single and MIMO antenna systems.
 
Download Datasheet | Product Details
 
Power Divider
30 Watt, 4-Way Power Divider from 250 to 6000 MHz

Power Divider from Mini Circuits

The ZN4PD1-63HP+ from Mini Circuits is a 4 way power divider which operates from 250 to 6000 MHz. It can handle up to 30 W of power, has an insertion loss of 1 dB and an isolation of up to 24 dB. It has an amplitude unbalance of 0.2 dB and a phase unbalance of 2 degrees.
 
Download Datasheet | Product Details
 
Power Divider
2 Way Power Divider from 20 MHz to 3 GHz

Power Divider from UMCC

The PS-3000-2S is a 2 Way Power Divider that operates from 20 MHz to 3 GHz. It can handle up to 8 Watts of CW power with matched loads and has an insertion loss under 2.4 dB. The power divider has an amplitude balance of ±0.2 dB and phase balance of ±1.5 Degrees.
 
Download Datasheet | Product Details
 
RF Amplifier
Gain Block Amplifier from DC to 1.4 GHz

RF Amplifier from Linear Technology

The LTC6433-15 from Linear Technology is a gain-block amplifier that operates from DC to 1.4 GHz. It delivers a gain of 15.9 dB with a P1dB of 19.2 dBm and has a noise figure of 3.22 dB at 150 MHz. The amplifier is internally matched to 50 ohms at the input and output, requiring a minimum of external components.
 
Download Datasheet | Product Details
 
Duplexer
217.5 MHz / 221 MHz Cavity Duplexer

Duplexer from Anatech Electronics

The AE217-221DB5400 from Anatech is a cavity duplexer with pass band frequencies from 217 to 218 MHz and 220 to 222 MHz. It has an isolation of more than 80 dB, an insertion loss of under 2 dB and a return loss of over 14 dB.
 
Download Datasheet | Product Details
 
Low Noise Block
C-Band Low Noise Block for VSAT & Remote RF Terminals

Low Noise Block from Actox

The ALS50500 from Actox is a low noise block that operates in the C-band. It accepts input frequencies from 3.4 GHz to 4.2 GHz and down-converts them to 950 to 1750 MHz (LO Frequency of 5.15 GHz with 500 kHz stability). This LNB has a conversion gain of 62 dB with a flatness of 4 dB, P1dB of 5 dBm and a VSWR of 2.5:1.
 
Download Datasheet | Product Details
 
RF Connector
MCX Straight PCB Jack Connector up to 6 GHz

RF Connector from Amphenol RF

The 919-382J-51P from Amphenol RF is a MCX straight PCB jack, through hole connector that operates up to 6 GHz. It is efficiently manufactured from machined brass, and plated gold or tin for solderability. Center contacts are made from beryllium copper, and are gold plated.
 
Download Datasheet | Product Details
 
RF Amplifier
4.3 GHz Dual Differential Amplifier

RF Amplifier from Analog Devices

The ADL5567 is a high performance, dual differential amplifier that operates up to 4.3 GHz. This amplifier offers a low noise of 1.29 nV/vHz and excellent distortion performance. It provides a gain of 20 dB and for the single-ended input configuration, the gain is reduced to 18 dB.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.