1. everything RF
  2. RF Newsletters
more
PREV 19 Oct, 2016 NEXT

New RF & Microwave Products this Week

Oct 19, 2016 - everything RF Newsletter
 
everything RF
Date: Oct 19, 2016
 
Sponsored by Coilcraft
 
 
 
New RF & Microwave Products this Week
Antenna
2.80 dBi, Small Flexible Antenna for 433 MHz ISM Band

Antenna from Antenova

The Inca (Part Number: SRFI028) from Antenova is a small flexible antenna that operates in the 433 MHz band. It has a gain of 2.80 dBi and an efficiency of 45%. The antenna is available with an I-PEX connector and a choice of three cable lengths, 100 mm, 150 mm or 200 mm.
 
Download Datasheet | Product Details
 
Front End Module
Low-Noise Amplifier Front-End Module with GPS/GNSS/BDS Pre and Post-Filters

Front End Module from Skyworks

The SKY65903-11 is a front-end module (FEM) for GPS/GNSS/BDS Applications consisting of a low-noise amplifier with pre and post-filters. The device provides high linearity, excellent gain, and a low noise figure. The pre and post filters provide low in-band insertion loss and excellent rejection for the cellular, PCS, and WLAN frequency bands.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise Amplifier from 2.3 to 3.8 GHz for DAS & Small Cells

RF Amplifier from Guerrilla RF

The GRF2072 from Guerrilla RF is a low noise amplifier that operates from 2.3 to 3.8 GHz. It provides a P1dB of 19.7 dBm with a gain of 19.3 dB and has a noise figure of 0.50 dB. The LNA requires a supply voltage of 6 V and consumes up to 500 mW of power. It is available in a surface mount package and is ideal for distributed antenna systems, small cells and cellular repeaters.
 
Download Datasheet | Product Details
 
Fixed Attenuator
2 W, Fixed Attenuators from DC to 2.5 GHz

Fixed Attenuator from MECA

The 615-dB-1 series of Fixed Attenuators from MECA operates from DC to 2.5 GHz. They are available with attenuation vales from 30 to 40 dB through the band and can even go up to 90 dB of attenuation from DC to 1 GHz. The Attenuators can handle up to 2 W of average power and up to 1000 watts of peak power.
 
Download Datasheet | Product Details
 
RF Connector
4.3-10 Mini DIN Low PIM Connectors from DC to 12 GHz

RF Connector from VidaRF

The 4.3-10 Mini DIN series of coaxial connectors from VidaRF were developed to meet the growing demands of high performance mobile communications systems. The connectors operate from DC to 12 GHz with excellent return loss and low PIM (Under -160 dBc).
 
Download Datasheet | Product Details
 
RF Amplifier
100 W, Power Amplifier from 700 to 2700 MHz

RF Amplifier from Mini Circuits

The ZHL-100W-272+ from Minicircuits is a high power amplifier that operates from 700 to 2700 MHz. It delivers an output power of up to 100 W with a gain of 48 dB and has reverse isolation of 89 dB. The amplifier requires a supply voltage of 28 to 32 Volts and consumes up to 16 A of current.
 
Download Datasheet | Product Details
 
Sponsored by Coilcraft
New Chip Inductors
New Chip Inductors Offer Highest L and Lowest DCR
Coilcraft’s new 0402DF Series chip inductors offer higher inductance values and significantly lower DC resistance than other 0402-sized inductors, making them ideal for RF choke and filtering applications. Offered in 25 inductance values from 20 to 3300 nH. Free samples! Click here to learn more
 
 
 
RF Amplifier
GaAs Low Noise Amplifier from 4.8 to 6 GHz

RF Amplifier from Analog Devices

The HMC717ALP3E from Analog Devices is a GaAs PHEMT MMIC Low Noise Amplifier that operates from 4.8 to 6 GHz. It provides an output P1dB of up to 18 dBm with a gain of 14.5 dB and has a noise figure of 1.1 dB. The amplifier requires a supply voltage of 3 to 5 V and consumes less than 100 mA of current.
 
Download Datasheet | Product Details
 
Microwave Backhaul Radio Links
5 Gbps Point-to-Point Radio Covers 70/80 GHz Bands

Microwave Backhaul Radio Links from Siklu

The EtherHaul-5500FD from Siklu is a 70/80 GHz E-Band Radio the delivers 5 Gbps full duplex point-to-point wireless Ethernet connectivity. This radio supports the 71-76/81-86 GHz bands with additional output power and wider channels making it easy for operators and enterprises to extend their networks by very quickly adding affordable, high capacity wireless links that are easy to install.
 
Download Datasheet | Product Details
 
RF Switch
Phase-Matched Absorptive Solid-State Switch from 2 to 18 GHz

RF Switch from UMCC

The SW-S010-8S from UMCC is a Phase-Matched Absorptive Solid-State Switch that operates from 2 to 18 GHz. It has an insertion loss of 3.8 dB with an isolation of 60 dB and a VSWR of 2:1. The switch has a 25 ns Rise/Fall Time with a 50 ns On/Off time. It can handle up to 0.5 watts of input power and requires a +5/-12V Supply.
 
Download Datasheet | Product Details
 
RF Amplifier
3 Watt Power Amplifier from 14.4 to 15.5 GHz

RF Amplifier from Triad RF Systems

The TA1149 from Triad RF Systems is a Ku-Band Class A - SSPA that operates from 14.4 to 15.5 GHz. It has been designed for Ku band UAV data and video links for both GCS and air vehicle installation. This amplifier can be used for military and commercial applications.
 
Download Datasheet | Product Details
 
Digital Phase Shifter
Analog Phase Shifter from 6 GHz to 15 GHz

Digital Phase Shifter from Pasternack Enterprises Inc

The PE82P2001 from Pasternack is an Analog Phase Shifter that operates from 6 to 15 GHz with the capability for phase shifting from 0 to more than 600 Degrees. It has an insertion loss of less than 10 dB, a return loss of 7 dB and a phase voltage sensitivity of 120 Degrees. The phase shifter has a single positive control voltage from 0 to 5 V.
 
Download Datasheet | Product Details
 
VCXO
Ultra-Low Jitter, High Performance VCXO from 1 to 2.2 GHz

VCXO from Rakon

The RVG1490L from Rakon is a VCXO that operates from 1 to 2.2 GHz with very low RMS phase jitter. It can generate output waveforms that are Sinewaves, Differential Sinewaves or LVPECL. This VCXO has excellent tuning control with a tuning voltage from 0 to 3.3 V. It is available in a surface mount package that measures 14 x 9 mm and is ideal for Optical Coherent Networking, and high speed ADC/DAC/SERDES clocking.
 
Download Datasheet | Product Details
 
Sponsored by Coilcraft
 
 
 
OCXO
Low Phase Noise OCXO for Mision Critical Applications

OCXO from Greenray Industries

The YH1485 Series of OCXO from Greenray Industries operates from 10 to 100 MHz. These crystal oscillators have a sinewave output with a low phase noise below -155 dBc/Hz at 100 kHz. They require a 12 to 15 V DC Supply and are available in a 1-inch square hermetic package.
 
Download Datasheet | Product Details
 
TCXO
Ultra-Miniature TCXO's for IoT and Wearables

TCXO from IQD Frequency Products

The IQXT-350 series from IDQ are Temperature Compensated Crystal Oscillators (TCXO) available in four standard frequencies; 19.2, 26, 38.4 and 52 MHz. They operate at 1.8 V with a maximum current consumption of only 1.7 mA and have a clipped sinewave output with 10 kO//10pF drive capability.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
Ruggedized, Modular Programmable Frequency Synthesizer from 1 to 18 GHz

Frequency Synthesizer from EM Research

The THOR Series of programmable frequency synthesizers from EM Research can generate signals with frequencies from 1 to 18 GHz with a resolution ranging from 100 kHz to 10 MHz. The signals can have a power level of up to 14 dBm with harmonics below -25 dBc and spurious suppression under -60 dBc.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.