1. everything RF
  2. RF Newsletters
more
PREV 24 Oct, 2016 NEXT

Latest News & White Papers this Week

24 Oct, 2016 - everything RF Newsletter
 
everything RF
Date: 24 Oct, 2016
 
Sponsored by Remcom
 
 
 
Top News Stories this Week
Qualcomm Introduces World's First mm-Wave 5G Modem - Qualcomm Technologies
Skyworks Front-End Solutions Supports High Power Requirements for Mobiles - Skyworks
Millimeter-Wave CMOS Solution for Automotive Radar - Fujitsu Laboratories
London Airport Installs mm-Wave Security Scanners from Rohde & Schwarz - Rohde & Schwarz
World’s First 802.11ax Wi-Fi Chipset Solution - Quantenna Communications
Researchers Use Pulse-Radio Technology to Deliver 1 Tearbit Data Rate - Rice University
Mounted Positioning, Navigation, and Timing Device to make GPS more Reliable - CERDEC
New Ultra-Wideband Antennas for the 600 & 1400 MHz Cellular Bands - CommScope
Next-Gen Navigation System Uses Existing Cellular Signals, Not GPS - University of California
Densely Packed Receivers and Transmitters for Military Applications - DRS Technologies
Sprint Selects DragonWave's Backhaul Solution to Densify its Network - Sprint
Researchers Succeed in Transmitting Energy Wirelessly Using Microwaves - Japan Aerospace Exploration Agency
Samsung Hosts Summit to Discuss Challenges Involved in the 5G Commercialization - Samsung
More News
New White Papers
Using Enhanced Load-Pull Measurements for the Design of Base Station Power Amplifiers - National Instruments
Key Parameters for Selecting RF Inductors - Coilcraft
RF Pulse Measurements in Time and Frequency Domains - R&S
Software-Defined Radio Handbook - PENTEK
Thread Technology - Technical Brief & Overview for Industrial IoT Applications - Digi
More White Papers
Upcoming Event
Event Image
MILCOM 2016

Date: 1 to 3 Nov, 2016

Location: Baltimore, MD

 
More Upcoming events
Sponsored by Remcom
Simulation of Beamforming
Simulation of Beamforming by Massive MIMO Antennas in Dense Urban Environments
This presentation demonstrates a new predictive capability for simulating massive MIMO antennas and beamforming in dense urban environments. We predict the signal-to-interference-plus-noise ratio (SINR) at specific device locations and the actual physical beams formed, including unintentional distortions caused by pilot contamination. Click here to learn more
 
 
 
Featured Products this Week
RF Inductor
World's Smallest High Frequency Inductors from 0.3 nH to 2.7 nH

RF Inductor from Murata

The LQP01HQ series of high-frequency inductors from Murata are the world&rsquos smallest HF Inductors at a 008004 size (0.25 × 0.125 mm). They take up about half the mounting area of the smallest previous product which was a 01005 size and retain the same Q characteristics as the 01005 size LQP02TN series.
 
Download Datasheet | Product Details
 
Signal Generator
6 GHz USB Vector Signal Generator

Signal Generator from Triarchy Technologies

The VSG25A from Triarchy Technologies is an USB vector signal generator that operates from 1 MHz to 6.2 GHz. It features a 12-bit I/Q baseband arbitrary waveform generator which can be clocked at virtually any frequency from 54 kHz to 180 MHz, and includes a 4096×16 bit pattern buffer for built-in or custom modulation.
 
Download Datasheet | Product Details
 
Antenna
Unobtrosive Flat Panel Antenna for mm-Wave Radios

Antenna from Huber+Suhner

The SENCITY Matrix is a series of flat panel antennas from HUBER+SUHNER that are small in size and have an unobtrusive appearance. The small form factor antennas are designed to minimize visual impact of mm-wave radios and allow better integration into urban environments while delivering excellent electrical performance.
 
Download Datasheet | Product Details
 
RF Connector
DC to 18 GHz, N Type Connector for High Power RF Applications

RF Connector from MOLEX

The Type N Connector series from Molex consists of Plug, Jack, 50 Ohm and 75 ohm connectors with a VSWR of 1.15:1. The connectors have a voltage rating of 1000 Vrms and can operate up to 11 GHz (50 Ohms) or 6 GHz (75 Ohms). They operate at a temperature from -55 to 165 Degrees C.
 
Download Datasheet | Product Details
 
RF Switch
High Speed RF Switch from 8 to 12 GHz

RF Switch from Planar Monolithics Industries

The P1T-8G12G-70-R-SFF from Planar Monolithics is a Reflective, High Speed, SPST Switch that operates from 8 to 12 GHz. It has an insertion loss of 1.8 dB and can handle a power of 20 to 30 dBm. This switch has an isolation of greater than 70 dB and a switching speed of maximum 50 ns.
 
Download Datasheet | Product Details
 
RF & Microwave Isolator
10 W, RF & Microwave Isolator from 0.698 to 1 GHz

RF & Microwave Isolator from MECA

The IS-0.849 from MECA is a RF & Microwave Isolator that operates from 0.698 to 1 GHz. It has an isolation of over 16 dB, an insertion loss of up to 0.6 dB and a VSWR of below 1.45:1. The isolator can handle up to 10 watts of average power and 750 watts of peak power.
 
Download Datasheet | Product Details
 
Termination
DC to 200 MHz Flanged Termination Handles up to 800 Watts

Termination from API Technologies - Inmet

The TPT1250-800 from API Inmet is a flanged termination that operates from DC to 200 MHz. The termination can handle up to 800 W of power, has a resistive tolerance of 5% and a VSWR of 1.25:1. This thin film termination has been developed on a beryllium oxide ceramic substrate, with an Alumina Ceramic cover and Nickel plated copper flanges.
 
Download Datasheet | Product Details
 
RF Connector
4.1/9.5 Mini DIN Low PIM Connectors from DC to 14 GHz

RF Connector from VidaRF

The 4.1/9.5 Mini DIN connectors from VidaRF were developed to meet the growing demands of high performance mobile communications systems. The connectors operate from DC to 14 GHz with an excellent return loss and low PIM (Under -165 dBc). They are ideally suited for use in cellular base stations, distributed antenna systems (DAS) and small cell applications.
 
Download Datasheet | Product Details
 
SATCOM Amplifier System
X-Band Rack-Mount SSPAs 60W to 150W

SATCOM Amplifier System from Advantech Wireless

The ARMA-2000X series are the rack-mount solid-state power amplifiers (SSPAs) that operate from 7.9 to 8.4 GHz in the X-Band. The amplifier is an integrated unit, complete with power supply and cooling system. It is intended for protected/indoor environments. They are available in multiple power configurations from 60 Watts to 150 Watts (60W/80W/100W/125W/150W).
 
Download Datasheet | Product Details
 
RF Module
1 Watt Long-Range RF Module from 902 to 928 MHz

RF Module from Digi

The XBee-PRO XTC Module from Digi is a RF module that operates from 902 to 928 MHz in the ISM band. Its output power is software adjustable from 100 mW to 1 W - the maximum output power allowable by governments that use 900 MHz as a license-free band.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
1 Hz to 20 GHz USB Real-Time Spectrum Analyzer and Recorder

RF Spectrum Analyzer from Aaronia AG

The Spectran V5 X is a Portable USB Real-Time Spectrum Analyzer and Recorder that operate from 1 Hz to 20 GHz (Available in 6 GHz, 12 GHz, 16 GHz and 20 GHz options). These analyzers have a real time bandwidth up to 175 MHz and have a very fast sweep mode enabling them to scan 20 GHz in less than 20 msec.
 
Download Datasheet | Product Details
 
Receiver
Digital Receiver from 9 kHz and 18 GHz

Receiver from IZT

The IZT R5000 from IZT GmbH is a digital receiver that operates from from 9 kHz and 18 GHz. It supports up to 100 MHz of instantaneous bandwidth. The received signals are available in up to four configurable wideband I/Q Data channels with user configurable sample rates and independent center frequencies.
 
Download Datasheet | Product Details
 
Wireless Charging Solution
Low Power Wireless Charger for Hearing Aids

Wireless Charging Solution from Linear Technology

The LTC4123 is a wireless charging receiver which has been optimized for low power applications. It combines a 30mW wireless receiver with a constant current/constant voltage linear charger for NiMH batteries, such as Varta's power one ACCU plus series. An external resonant LC tank connected to the chip enables the IC to receive power wirelessly from an alternating magnetic field generated by a transmit coil.
 
Download Datasheet | Product Details
 
Horn Antenna
Horn Antennas from DC to 40 GHz Comply with Naval Research Lab Report

Horn Antenna from Flann Microwave

The Series 240-NRL from Flann is a range of horn antennas that operate from DC to 40 GHz. They have a gain from 13.7 to 24.7 dBi and a VSWR of 1.2:1. These horn antennas comply with U.S. Naval Research Lab Report (NRL), report no. 4433. They are ideal for measurement standard and calibration applications. Standard and special flange options are also available.
 
Download Datasheet | Product Details
 
Waveguide Mixer
55 GHz to 90 GHz Waveguide Mixer Extends Signal Analyzer Range

Waveguide Mixer from Keysight Technologies

The M1971E from Keysight is a waveguide harmonic mixer that can be used with the Kysight X-Series signal analyzers. It is available in two frequency options &ndash 55 GHz to 90 GHz and 60 GHz to 90 GHz. It has an IF frequency of between 100 MHz to 2.5 GHz.
 
Download Datasheet | Product Details
 
Laminate
High Performance, Low Cost Antenna-Grade Laminate

Laminate from Rogers Corporation

The RO4700 laminates from Rogers Corporation are antenna-grade laminates, fully compatible with conventional FR-4 and high temperature lead-free solder processing and do not require the special treatment needed on traditional PTFE-based laminates for plated through hole preparation.
 
Download Datasheet | Product Details
 
Sponsored by Remcom
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.