PREV 2 Nov, 2016 NEXT

New RF & Microwave Products this Week

Nov 2, 2016 - everything RF Newsletter
 
everything RF
Date: Nov 2, 2016
 
Sponsored by Inmet (API Technologies)
 
 
 
New RF & Microwave Products this Week
RF Amplifier
10 KW COTS L-Band Pulsed Power Amplifier for Radar Applications

RF Amplifier from Empower RF

The 2185 high power amplifier system operates from 960 to 1215 MHz and provides up to 10 kW of pulsed power with duty cycles from 0.1% to 5%. This compact and versatile radar transmitting amplifier has flexible operating modes and is ideal for radar component testing, advanced research, and system development. It is also well suited for mobile EW and threat simulator applications.
 
Download Datasheet | Product Details
 
Antenna
4x4 MIMO Panel Antenna from 1.4 to 1.7 GHz

Antenna from Southwest Antennas

The 1055-338 from Southwest Antennas is a four port MIMO panel antenna that operates from 1.4 to 1.7 GHz. The antenna has been designed for use with 4x4 MIMO radio systems and provide a focused sectorial radiation pattern that is ideal for directional communication needs and focusing MIMO network coverage in a specific area.
 
Download Datasheet | Product Details
 
Microwave Absorber
Polypropylene Based Hybrid Absorbers from 30 MHz to 40 GHz

Microwave Absorber from MVG-EMC

The UH Series from MVG-EMC are polypropylene based hybrid electromagnetic pyramid absorbers that operate from 30 MHz to 40 GHz. The polypropylene material has a highly uniform carbon density, throughout the material, which provides for more predictable results with no discontinuities through the band.
 
Download Datasheet | Product Details
 
Bias Tee
Bias Tee + Diplexer Operates from 250 to 2500 MHz

Bias Tee from UMCC

The BD-H250-BB from UMCC is a combined bias tee and diplexer that operates from 250 MHz to 2500 MHz. It has an Isolation of more than 65 dB and an insertion loss less than 0.3 dB. The device can handle a power of 100 W CW, bias voltage of up to 150 V and bias current of 3.5 A. It is available in a module with BNC female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise Amplifier from 1 to 2 GHz

RF Amplifier from Planar Monolithics Industries

The PEC-53-12-10-15-SFF from Planar Monolithics is a low noise amplifier that operates from 1 to 2 GHz. It has a gain of 53 dB with ±0.75 dB flatness, OP1dB of over 16 dBm and a noise figure of 0.7 dB. The amplifier has a VSWR (I/O) of 1.5:1 max., and requires a supply voltage of 12 to 15 V.
 
Download Datasheet | Product Details
 
RF Amplifier
60 W Solid State GaN Power Amplifier from 6 to 18 GHz

RF Amplifier from Exodus Advanced Communications

The AMP1122 from Exodus Advanced Communications is a Solid State GaN power amplifier that operates from 6 to 18 GHz. It delivers an output power of 60 W with a gain of more than 46 dB and has a noise figure of below 10 dB. The amplifier requires a supply voltage of 32 VDC and consumes up to 27 A of current.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
Variable Attenuators
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability. To learn more, download the data sheet.
 
 
 
GPS/GNSS Module
Multi-Constellation GNSS Module for Wearable Devices

GPS/GNSS Module from Telit Communications

The SE873Q5 from Telit is an ultra-low-power GNSS module for tracking and navigation applications. This multi-constellation receiver module can be set to a number of different power saving modes depending on the intended application. It also includes an ultra-low noise amplifier for boosting sensitivity.
 
Download Datasheet | Product Details
 
RF Amplifier
50 W, GaN SSPA Module from 6 to 18 GHz

RF Amplifier from Comtech PST

The BME69189-50 from Comtech PST is a solid state GaN power module that operates from 6 to 18 GHz. It delivers an output power of more than 50 Watts with a gain of over 47 dB and has an efficiency of above 14%. The module requires a supply voltage of 28 VDC and consumes less than 15 W of power.
 
Download Datasheet | Product Details
 
Band Pass Filter
Cavity Bandpass Filter from 537.6 to 590 MHz

Band Pass Filter from Anatech Electronics

The AE564B11154 from Anatech Electronics is a cavity bandpass filter that has a passband range of 537.6 to 590 MHz. It has an insertion loss of less than 1.5 dB and a rejection of over 17 dB. The filter is available in a module with N-type female connectors and measure 6.24 x 3.25 x 3.08 inches.
 
Download Datasheet | Product Details
 
RF Module
Bluetooth Low Energy Wireless MCU Module

RF Module from Texas Instruments

The CC2650MODA from Texas Instruments is a wireless microcontroller (MCU) module that supports BLE, ZigBee, 6LoWPAN and ZigBee RF4CE remote control applications. This low power 2.4 GHz module has a receiver sensitivity of –97 dBm for Bluetooth low energy and –100 dBm for 802.15.4.
 
Download Datasheet | Product Details
 
Frequency Multiplier
Passive Frequency Doubler with 175 GHz to 200 GHz Output

Frequency Multiplier from Farran Technology

The FD-05-0001 from Farran Technology is a passive frequency doubler with an output frequency range from 175 GHz to 200 GHz. It can accept can handle up to 200 mW of input power and delivers an output power from 15 to 80 mW. The frequency doubler has an efficiency of up to 45%.
 
Download Datasheet | Product Details
 
RF Amplifier
39 dBm, GaN Power Amplifier from 30 to 2500 MHz

RF Amplifier from Triad RF Systems

The TA1003 from Triad RF is a GaN power amplifier that operates from 30 to 2500 MHz. It delivers an output power of 39 dBm with a gain of over 35 dB. The amplifier requires a supply voltage of 9 to 36 VDC and consumes 1.2 A of current. It is capable of supporting any signal type and modulation format, including but not limited to 3-4G telecom, WLAN, OFDM, DVB, and CW/AM/FM.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
 
 
 
Antenna
Multiband Active Antenna for GPS, GLONASS, 2G and 3G applications

Antenna from San Jose Technology

The AU-4GS from San Jose Technology is an active multiband antenna for GPS, GLONASS, 2G and 3G applications that operates from 824 to 2170 MHz. This waterproof antenna provides a gain of 27 dB for GPS antenna, 5 dBi from 700 to 960 MHz and 2 dBi from 1710 to 2690 MHz.
 
Download Datasheet | Product Details
 
RF Amplifier
2 W Ultra-Linear Amplifier from 20 to 1200 MHz

RF Amplifier from Amplifier Solutions Corporation

The ASC520 from Amplifier Solutions Corporation is an ultra-linear amplifier that operates from 20 to 1200 MHz. This amplifier consists of a GaAs pHEMT die driving a GaN die. It delivers an output power of 2 W with a gain of up to 23 dB and has a noise figure of below 4 dB.
 
Download Datasheet | Product Details
 
Digital Phase Shifter
Analog Phase Shifter from 6 GHz to 15 GHz

Digital Phase Shifter from Pasternack Enterprises Inc

The PE82P2001 from Pasternack is an Analog Phase Shifter that operates from 6 to 15 GHz with the capability for phase shifting from 0 to more than 600 Degrees. It has an insertion loss of less than 10 dB, a return loss of 7 dB and a phase voltage sensitivity of 120 Degrees. The phase shifter has a single positive control voltage from 0 to 5 V.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.