1. everything RF
  2. RF Newsletters
more
PREV 7 Nov, 2016 NEXT

Latest News & White Papers this Week

Nov 7, 2016 - everything RF Newsletter
 
everything RF
Date: Nov 7, 2016
 
Event Coverage
 
 
 
Top News Stories this Week
UWB Indoor Location Technology to Power the Industrial IoT Markets - Decawave & Quantitec
An Out-of-Box-Ready to Install Wireless Charging System - Semtech Corporation
Spatial Multiplexing of Laser Beams Could Help Solve the Bandwidth Crunch - University of Witwatersrand
MACOM Wins Preliminary Injuction to Block Infineon's Use of GaN-on-Si for RF Applications - MACOM
Researchers Find Gallium Nitride to be Almost as Tough as Diamonds - University of Lehigh
World’s First K-band Digital-to-Analog Converter - e2v
Keysight to Exhibit Wide Range of Test Solutions at Electronica 2016 - Keysight
u-blox to Demonstrate LTE Cat 1 and NB-IoT Use Cases at Electronica - u-blox
NI to Supply Infrastructure for DARPA's Spectrum Collaboration Challenge - National Instruments
Researchers Develop Graphene-Based Device to Measure Electromagnetic Radiation - Lomonosov Moscow State University
MMBX Connectors and Adapters for Circuit Board Connectivity Applications up to 12 GHz - Pasternack
TI Introduces New Bluetooth Low Energy Module for Industrial IoT Applications - Texas Instrument
More News
New White Papers
Master Spectrum Analysis - Keysight
3GPP Low Power Wide Area (LPWA) Technologies - GSMA
RF Power Splitters in Cellular UE Manufacturing - LitePoint
IEEE 802.11ax Technology Introduction - Rohde & Schwarz
PIN Limiter Diodes in Receiver Protectors - Skyworks
More White Papers
Upcoming Event
Event Image
RWW 2017

Date: 15 to 18 January, 2017

Location: Hyatt Regency in Phoenix, Arizona

 
More Upcoming events
Featured Products this Week
Front End Module
5 GHz CMOS 802.11ac Front-End IC with PA, LNA and SPDT

Front End Module from Skyworks

The RFX8053 from Skyworks is a highly integrated, single-chip, single-die CMOS RFeIC (RF Front-end Integrated Circuit) that operates from 5.15 to 5.825 GHz. It consists of a power amplifier (PA), a low noise amplifier (LNA) with bypass, the associated matching network, LO rejection, and harmonic filters all in a CMOS single-chip device.
 
Download Datasheet | Product Details
 
RF Connector
4.3-10 RF Connectors for the Wireless Applications

RF Connector from MOLEX

The 4.3-10 RF Connectors from Molex operates from DC to 12 GHz. This connector format has low-PIM performance and 100% data traceablility with a connector that is 30% smaller and 70% lighter than the traditional DIN 7/16 connector. This 4.3-10 connector solution has three mating options for right-angle and vertical plugs (hand tight, quick lock and wrench tight).
 
Download Datasheet | Product Details
 
In Series RF Adapter
4.3-10 Mini DIN Series of Adapters from DC to 12 GHz

In Series RF Adapter from VidaRF

The 4.3-10 Mini DIN series of adapters from VidaRF have been developed to meet the growing demands of high performance mobile communications systems. These adapters operate from DC to 12 GHz with excellent return loss and low PIM (Under -160 dBc).
 
Download Datasheet | Product Details
 
RF & Microwave Isolator
RF Isolator from 700 to 800 MHz

RF & Microwave Isolator from MECA

The IN-0.750 from MECA is a RF & Microwave Isolator that operates from 0.7 to 0.8 GHz. It provides an isolation of more than 17 dB and an insertion loss of up to 0.50 dB. The isolator can handle an average power of 2 Watts and has a VSWR of 1.30:1.
 
Download Datasheet | Product Details
 
RF Switch
Absorptive SP4T Pin Diode Switch from 0.1 to 50 GHz

RF Switch from Planar Monolithics Industries

The P4T-100M50G-100-T-RD from Planar Monolithics is a SP4T switch that operates from 0.1 to 50.0 GHz. This absorptive pin diode switch has a low insertion loss, high isolation and can handle up to 20 dBm of power. It requires a supply voltage of -5V/+5 V and has a switching speed of 50 ns max.
 
Download Datasheet | Product Details
 
RF Module
Transceiver Module for Thread Applications

RF Module from Linx Technologies

The Raven Transceiver module consists of an 802.15.4 RF transceiver paired with a microcontroller specifically designed for the Thread protocol. The Raven module is an IEEE 802.15.4 standard radio paired with an ARM Cortex-M4 microcontroller. The IEEE 802.15.4 standard specifies the radio PHY and MAC layers, the low-level physical control and operation of the radio.
 
Download Datasheet | Product Details
 
RF Spectrum Recording and Playback System
RF Record & Playback System for Secure Classified Applications

RF Spectrum Recording and Playback System from X-COM Systems

The IQC5000B from X-COM Systems is a dual channel RF record and playback system designed for applications such as electronic warfare, interference analysis, surveillance, and spectrum monitoring and management. The system has two recording channels each with an instantaneous bandwidth of 255 MHz, these signal bandwidths can be recorded at any input frequency from HF through millimeter wavelengths.
 
Download Datasheet | Product Details
 
Low Noise Block
X-Band Low-Noise Block Down Converters

Low Noise Block from Comtech EF Data

This Low-Noise Block Down Converter Series from Comtech EF Data operates in the X-Band. It accepts input frequencies from 7.25 to 7.75 GHz and down-converts them to 950 to 1450 MHz. This LNB series has a conversion gain of up to 60 dB with a flatness of 1.5 dB, P1dB of 10 dBm, and a return loss of more than 15 dB.
 
Download Datasheet | Product Details
 
SATCOM Amplifier System
30 W to 1000W S-Band Power Amplifiers for Satellite Up-links

SATCOM Amplifier System from Advantech Wireless

The AWMA-S series from Advantech Wireless are the hub-mount solid-state power amplifiers (SSPAs) intended for satellite up-link applications. The SSPAs operate from 2.025 to 2.120 GHz in the S-band and are available in multiple power configurations from 30 W to 1000 W with a gain of more than 55 dB.
 
Download Datasheet | Product Details
 
Termination
DC to 1.8 GHz Flanged Termination Handles up to 500 Watts

Termination from API Technologies - Inmet

The PPT1250-500 from API Inmet is a flanged termination that operates from DC to 1.8 GHz. The termination can handle up to 500 W of power, has a resistive tolerance of 5% and a VSWR of 1.75:1. This thin film termination has been developed on a beryllium oxide substrate, with an Alumina Ceramic cover and Nickel plated copper flanges.
 
Download Datasheet | Product Details
 
EMF Meter / Antenna
RF EMF Strength Meter from 10 MHz to 8 GHz

EMF Meter / Antenna from Extech Instruments

The 480846 from Extech is an EMF Strength Meter that monitors high frequency radiation from 10 MHz to 8 GHz. This meter has a non-directional measurement with a 3-channel (triaxial) measurement probe, Max Hold and Average functions, and manual store/recall of up to 99 data sets. It also has an audible alarm with a user-selectable threshold.
 
Download Datasheet | Product Details
 
Antenna
Flexible 2x MIMO Antenna from 698 MHz to 3 GHz

Antenna from Taoglas

The FXUB71.A.07.C.001 from Taoglas is a flexible 2G/3G/4G 2x MIMO antenna that operates from 698 MHz to 3 GHz. This linearly polarized omni-directional antenna delivers a peak gain of up to 4.72 dBi with an efficiency of over 50%. It measures 240 x 21 x 0.15 mm and has a 150 mm Ø1.37 coaxial cable with I-PEX MHFI HT connector (U.FL compatible).
 
Download Datasheet | Product Details
 
Waveguide Termination
300 W High Power Terminations from 12.4 GHz to 220 GHz

Waveguide Termination from QuinStar Technology Inc

The QTW Series from Quinstar Technology is range of high power terminations that operate from 12.4 GHz to 220 GHz (Ku through G bands). They can handle an average power of up to 300 W and have a VSWR under 1.15:1. The terminations consists of a short length of waveguide and a matched terminal load.
 
Download Datasheet | Product Details
 
Vector Network Analyzer Extender
D-Band Network Analyzer Extender from 110 to 170 GHz

Vector Network Analyzer Extender from SAGE Millimeter

The STN-SF906-00-D2 from Sage Millimeter is a D-Band network analyzer extender that extends input frequencies from 12.22 GHz - 18.89 GHz to 110 - 170 GHz. The VNA extender consists of a frequency extender (STE-SF906-00-S1), direct reading attenuator (STA-60-06-DI), directional coupler (SWD-1040H-06-SB), and waveguide detectors (STD-06SF-NI).
 
Download Datasheet | Product Details
 
Waveguide Coupler
Crossguide Directional Couplers from 18 GHz to 110 GHz

Waveguide Coupler from Flann Microwave

The PCC Series from Ducommun is a range of crossguide directional couplers that operate from 18 to 110 GHz in seven waveguide bands. They have a coupling range from 15 dB to 30 dB, an insertion loss up to 1 dB and a directivity up to 16 dB. These couplers are used for power sampling or frequency monitoring with minimum signal loss on the main transmitting path making them ideal for system integrations.
 
Download Datasheet | Product Details
 
TCXO
Ultra-Miniature TCXO's for IoT and Wearables

TCXO from IQD Frequency Products

The IQXT-350 series from IDQ are Temperature Compensated Crystal Oscillators (TCXO) available in four standard frequencies; 19.2, 26, 38.4 and 52 MHz. They operate at 1.8 V with a maximum current consumption of only 1.7 mA and have a clipped sinewave output with 10 kO//10pF drive capability.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.