1. everything RF
  2. RF Newsletters
more
PREV 9 Nov, 2016 NEXT

New RF & Microwave Products this Week

Nov 9, 2016 - everything RF Newsletter
 
everything RF
Date: Nov 9, 2016
 
Sponsored by Inmet (API Technologies)
 
 
 
New RF & Microwave Products this Week
Limiter
Tunable Differential Signal Limiter from DC to 10 GHz

Limiter from Marki Microwave

The DLM-10SM from Marki Microwave is a tunable limiter that operates from DC to 10 GHz. This dual channel GaAs Schottky diode signal limiter has excellent IP3, insertion loss, and return loss. The limiting level is adjustable with an off-chip bias network, and the two channels can be used for differential or single-ended signals.
 
Download Datasheet | Product Details
 
180 Degree Hybrid Coupler
180 Degree Hybrid Coupler from 1 to 3 GHz

180 Degree Hybrid Coupler from Werlatone Inc

The H10125 from Werlatone is a 180 degrees hybrid coupler that operates from 1 to 3 GHz. It provides an isolation of more than 20 dB, insertion loss of under 0.5 dB and amplitude balance of 0.2 dB. This 3 dB coupler can handle up to 500 watts of CW power and has a VSWR of below 1.35:1.
 
Download Datasheet | Product Details
 
Antenna
Ultra Light, Portable 3D Tracking Antenna from 9 kHz to 6 GHz

Antenna from Aaronia AG

The IsoLOG 3D Mobile 9060 is an ultra light, Portable 3D Tracking Antenna that operates from 9 kHz to 6 GHz. This handheld isotropic antenna is compatible with any spectrum analyzer. It is a plug and play solution for 3D measurements that requires no software installation, no power connection and no hardware changes.
 
Download Datasheet | Product Details
 
Antenna
PCB Dual-Band Antenna for 2.4 GHz & 5 GHz Wi-Fi Applications

Antenna from Pulse Electronics

The SH0319D from Pulse Electronics is a ready-to-use, wireless printed circuit board antenna for laptops, tablets, mobile devices, and devices that operate in a similar environment. This Wi-Fi antenna covers both the 2.4 GHz and 5 GHz bands and provides a gain of up to 4.6 dB with an efficiency of 46%.
 
Download Datasheet | Product Details
 
Laminate
Laminates for Cellular Base Station Antennas

Laminate from Rogers Corporation

The RO4730G3 laminates from Rogers Corporation are antenna-grade laminates, fully compatible with conventional FR-4 and high temperature lead-free solder processing. This is an affordable alternative to conventional PTFE-based antenna materials it allows, designers to optimize cost and performance.
 
Download Datasheet | Product Details
 
RF Switch
Linear, Ultra-Low Loss Solid State SPDT Failsafe Switch from 0.1 to 3.8 GHz

RF Switch from Guerrilla RF

The GRF6011 from Guerrila RF is a linear, ultra-low loss Solid State SPDT Failsafe switch that operates from 0.1 to 3.8 GHz. A key application of a solid state failsafe SPDT switch would be in low noise amplifiers (LNA) and in tower mounted amplifiers (TMA), where the failsafe functionality is typically implemented using expensive mechanical relays or cumbersome Schottky diode switches external to a traditional LNA device.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
Variable Attenuator
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability. To learn more, download the data sheet.
 
 
 
Limiter
Limiter Diodes from 100 MHz to 30 GHz

Limiter from SemiGen

The SLP7100 series of Limiter Diodes from SemiGen are processed with a high-resistivity epitaxial wafer (epi) that has thin intrinsic layers. They can be used in passive or active limiter designs that operate from 100 MHz to 30 GHz. These diodes feature a low capacitance and resistance as well as a fast turn-on time of 5ns.
 
Download Datasheet | Product Details
 
In Series RF Adapter
4.3-10 Mini DIN Series of Adapters from DC to 12 GHz

In Series RF Adapter from VidaRF

The 4.3-10 Mini DIN series of adapters from VidaRF have been developed to meet the growing demands of high performance mobile communications systems. These adapters operate from DC to 12 GHz with excellent return loss and low PIM (Under -160 dBc). They are available in plug to plug, plug to jack and jack to jack combinations with straight & right angle geometries.
 
Download Datasheet | Product Details
 
Antenna
Flexible 2x MIMO Antenna from 698 MHz to 3 GHz

Antenna from Taoglas

The FXUB71.A.07.C.001 from Taoglas is a flexible 2G/3G/4G 2x MIMO antenna that operates from 698 MHz to 3 GHz. This linearly polarized omni-directional antenna delivers a peak gain of up to 4.72 dBi with an efficiency of over 50%. It measures 240 x 21 x 0.15 mm and has a 150 mm Ø1.37 coaxial cable with I-PEX MHFI HT connector (U.FL compatible).
 
Download Datasheet | Product Details
 
RF Switch
Constant Impedance SPST Switch from 30 to 8000 MHz

RF Switch from Integrated Device Technology

The F2910 from Integrated Device Technology is a SPST absorptive RF switch that operates from 30 MHz to 8000 MHz. The switch provides an isolation of 51 dB and has an insertion loss of 0.55 dB at 2 GHz. It uses a single positive supply voltage supporting either 3.3 V or 1.8 V control logic.
 
Download Datasheet | Product Details
 
RF Amplifier
32 W GaN Power Amplifier from 10 to 11 GHz

RF Amplifier from Qorvo

The TGA2623-CP from Qorvo is a high-power GaN power amplifier that operates from 10 to 11 GHz in the X-Band. It delivers a saturated output power of 32 W with a gain of 30 dB and has a power-added efficiency of more than 41 %. The amplifier requires a supply voltage of 28 V and consumes up to 290 mA of current.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
Voltage Variable Attenuator from 2 to 6 GHz

RF Variable Attenuator from Mini Circuits

The RVA-6000+ from Mini Circuits is a voltage variable attenuator that operates from 2 to 6 GHz. It has an attenuation range of 37.7 dB and can handle up to 20 dBm of input power. The attenuator has a rise/fall time of 6.8/3.5 microseconds, a return loss of 20 dB and an IP3 of 43 dBm.
 
Download Datasheet | Product Details
 
Sponsored by Inmet (API Technologies)
 
 
 
RF Module
Hybrid IoT Modules for 3G Cellular, Wi-Fi, Bluetooth and GNSS

RF Module from Telit Communications

The WE922-3GR from Telit is a hybrid smart IoT module that combines 2G/3G Cellular, Wi-Fi, Bluetooth and GNSS into a single package. This module supports 2.4 GHz Wi-Fi 802.11 b/g/n and Bluetooth 4.0 LE. The embedded global positioning receiver in the module is compatible with GPS and GNSS constellations. It also has optional 2G/3G cellular support.
 
Download Datasheet | Product Details
 
RF Module
IoT Module with Integrated LTE Category 1 Modem and GNSS

RF Module from u-blox AG

The LARA-R3121 module from u-blox integrates a single mode LTE Category 1 modem and a GNSS (Global Navigation Satellite System) positioning receiver in to a single device. It provides a data rate of 10 Mbits downstream and 5 Mbits upstream, which is sufficient for good quality video streaming.
 
Download Datasheet | Product Details
 
Block Up Converter
7.9 to 8.4 GHz Block Up Convetor

Block Up Converter from Comtech Xicom Technology

The XTSLIN-20X-B1 from Xicomtech is a Block Up Converter that operates in the X-band with an input frequency from 950 MHz to 1450 MHz and an RF frequency from 7.9 to 8.4 GHz. It provides an output power of 43 dBm (20 Watts) with a small signal gain of 55 dB and consumes 120 Watts of power.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.