PREV
March 1st, 2017
NEXT
New RF & Microwave Products this Week
1 March, 2017 - everything RF Newsletter| New RF & Microwave Products this Week |
|
|
| | Ultra-Low-Power Multi-protocol Bluetooth 5 System-on-Chip | RF Module from ON Semiconductor | | The RSL10 from ON Semiconductor is an ultra-low-power, multi-protocol Bluetooth 5 certified SoC for IoT and "connected" health and wellness devices. It has been specifically designed for applications using 1.2 and 1.5 V batteries, with a voltage supply range between 1.1 and 3.6 V without a required DC/DC converter. The highly-integrated SoC has a dual-core architecture and a 2.4 GHz transceiver, providing the flexibility to support Bluetooth low energy technology and other 2.4 GHz proprietary or custom protocols. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | Ultra-Low Power GNSS Chip for Portable Applications | GNSS Module from u-blox AG | | The UBX-M8230-CT from u-blox is an ultra low power GNSS chip for wearable and portable applications. The chip features the new Super-E mode (Super-Efficient) providing 3x power savings while maintaining at least 80% of position & speed accuracy in comparison to the traditional full power mode. The new Super-Efficient (Super-E) mode cuts the power consumption by two-thirds to a mere 20 mW with one position update every second so that there is almost no loss in accuracy. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | Front-End Module For WCDMA / LTE Bands | Front End Module from Skyworks | | The SKY78130 SkyOne® Ultra 3.0 is a multimode multiband (MMMB) Front-End Module (FEM) that supports 3G/4G, and CDMA handsets and operates efficiently in CDMA, WCDMA, HSPA, and LTE modes. The RF I/O ports are matched to 50 ohms, which minimizes the need for external components. The InGaP/GaAs die and passive components are mounted on a multi-layer laminate substrate and the assembly encapsulated in plastic overmold. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| Sponsored by MECA | | | Low PIM Bias Tees for DAS Applications | | | Low PIM (-165dBc Typical), High power (7 amp), Bias Tees for DAS Applications, with rugged construction and excellent performance across all wireless bands from 0.698 to 2.7 GHz make them ideal for in-building or tower top systems. Available in various Type N configurations as well as custom. Weather- proof IP 67 standard, IP68 available. Click here to learn more |
|
| | | | | | |
|
|
| | Diplexer for 1800/2100 MHz Bands | Diplexer from Kaelus | | The Kaelus DBC0021 is a diplexer that combines 1800 MHz and 2100 MHz signals at a single output. It can handle up to 250 watts of CW power and 1 kW of peak power with an isolation of over 55 dB. This can be at the Base Station end of the feeder or at the antenna, saving infrastructure capital expenditure and improving network reliability. The DBC0021 is suitable for indoor and outdoor applications with a wall and pole mounting kit available. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 2.4 GHz 802.11b/g/n Wi-Fi Low Noise Amplifier with Bypass | RF Amplifier from Qorvo | | The RFFM4227 is a low noise amplifier designed for Wi-Fi 802.11b/g/n systems. It provides a gain of 15 dB with a noise figure of 1.3 dB and 6 dB bypass loss. The LNA integrates a bypass path that enables a defined gain step and is matched to 50 ohms at the input and output minimizing the layout area required, thereby reducing the bill of materials and manufacturability cost. The device is available in a 1.6mm x 1.6mm x 0.5mm, 6-pin DFN package. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | Miniature Dual Ku Band BUC | Block Up Converter from Linwave | | The LW30-793208 from Linwave is a dual band Ku BUC that accepts an input frequency from 950 to 1750 MHz and up-converts it to 12.75 to 14.50 GHz (LO frequency 11.8 to 12.8 GHz). It provides more than 0 dBm of output power with a gain of -2 to 2 dB. The BUC is available in a module that measures 100 x 125 x 25 mm and weighs 750 g. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 990 MHz Pre-programmed Fixed Frequency Synthesizer | Frequency Synthesizer from Z-COMM | | The SFS0990C-LF from Z-Communications is a pre-programmed Fixed Frequency Synthesizer that is phase locked at 990 MHz to an external 10 MHz reference oscillator. This PLL features an exceptionally low phase noise of -119 dBc/Hz at 10 kHz, -100 dBc/Hz at 1 kHz, and -141 dBc/Hz at 100 kHz offsets. It delivers an output power of +1 dBm and requires a supply voltage of 5 Vdc while drawing 25 mA of current and a phase locked loop voltage of 3 Vdc while drawing 14 mA of current. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | DC to 40 GHz Distributed Driver Amplifier MMIC | RF Amplifier from Custom MMIC | | The CMD242 from Custom MMIC is a GaAs MMIC distributed amplifier die that operates from DC to 40 GHz covering the L, S, C, X, Ku, K, Ka, Q, U Bands. It delivers a gain of 10.5 dB with an saturated output power of 21 dBm and has a noise figure of 4.4 dB at 10 GHz. The amplifier requires a supply voltage of 8 V and consumes up to 100 mA of current. It is ideal for aerospace, commercial and military applications. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| About everything RF | | everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool. |
|
|
|
