1. everything RF
  2. RF Newsletters
more
PREV 12th July, 2017 NEXT

New RF & Microwave Products this Week

12 July, 2017 - everything RF Newsletter
 
everything RF
Date: 12 July, 2017
 
Sponsored by Digi-Key
 
 
 
New RF Products this Week
RF Switch
AlGaAs SP3T PIN Diode Switch from 75 GHz to 100 GHz

RF Switch from MACOM

The MASW-011029 from MACOM is a AlGaAs SP3T pin diode switch that operates from 75 GHz to 100 GHz. It has an insertion loss of 1.3 dB with an isolation of 33 dB and a switching speed of 2 ns. It is available as a die and is ideal for applications in satellite communications, millimeter-wave radar, 77 GHz automotive cruise control radar, and 94 GHz imaging in astronomy, defense, and security applications.
 
Download Datasheet | Product Details
 
Switch Matrix
USB/Ethernet RF Switch Matrix from DC to 12 GHz

Switch Matrix from Mini Circuits

The RC-1SP6T-A12 from Mini-Circuits is an USB or Ethernet controlled, absorptive fail-safe SP6T switch matrix that operates from DC to 12 GHz. It has an insertion loss of 0.2 dB, an isolation of 90 dB and a switching speed of 25 milliseconds. The switch can handle up to 20 watts of power and requires a supply voltage of 24 VDC.
 
Download Datasheet | Product Details
 
RF Connector
4.3 - 10 Quick Lock and Screw-on Connectors from DC to 6 GHz

RF Connector from Radiall

The R183 series from Radiall are 4.3 - 10, quick lock and screw-on connectors that operate from DC to 6 GHz. They have a low PIM level of -166 dBc and provide more than 100 mating cycles. These connectors can handle a power of up to 500 watts at 2 GHz. The connectors are available in three coupling mechanisms - screw, hand screw and push-pull.
 
Download Datasheet | Product Details
 
Antenna
2.4 GHz SMD Antenna for Bluetooth, Wi-Fi, ZigBee and ISM Applications

Antenna from Antenova

The SR4W035 (Serica) from Antenova is a small antenna for Bluetooth, Wi-Fi, ZigBee and ISM applications that operates from 2.4 to 2.5 GHz. It delivers a gain of 3.5 dBi with an efficiency of up to 65% and requires a small ground plane. The antenna has been designed for integration and maintains high performance when embedded.
 
Download Datasheet | Product Details
 
RF Amplifier
2000 W Solid-State Pulsed Amplifier from 1.2 to 1.4 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 2000SP1z2G1z4 from AR RF/Microwave Instrumentation is a self-contained, forced-air-cooled, solid-state amplifier that operates from 1.2 to 1.4 GHz. It delivers over 2000 watts of peak RF pulse power with a gain of more than 63 dB and a noise figure of 15 dB. The amplifier is ideal for RF pulse susceptibility testing, Industrial and University Research and Development, and Service applications.
 
Download Datasheet | Product Details
 
RF Amplifier
100 W Solid State Amplifier from 8 to 12 GHz

RF Amplifier from Exodus Advanced Communications

The AMP4048 from Exodus Communication is a solid state amplifier that operates from 8 to 12 GHz. This amplifier provides an output of more than 100 W and a gain of over 50 dB with a flatness of 3 dB. It can be used for all single channel modulation standards.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
IDT’s F2480
IDT F2480 Broadband RF Analog Variable Gain Amplifier
IDT’s F2480 flexible pinout enables either the amplifier or voltage variable attenuator (VVA) to be configured as the first stage in the cascade. The F2480 combines a VVA with IDT's exclusive Zero-Distortion™ RF amplifier in a compact package, delivering low insertion loss and high linearity. Click here to learn more
 
 
 
Microwave Backhaul Radio Links
5 GHz Gigabit Backhaul Radio and Switch

Microwave Backhaul Radio Links from Fastback Networks

The IBR-1300 from Fastback Networks is a fast and compact 5 GHz backhaul radio that meets all LTE requirements for throughput and latency in fully obstructed NLOS conditions. It has an integrated radio and switch. The dynamic spectrum analysis capability of the radio manages interference and ensures sustained radio link reliability and throughput.
 
Download Datasheet | Product Details
 
Antenna
4-Port Dual-beam Antenna from 694 to 896 MHz

Antenna from CommScope

The 2UPX210B-T2 from Commscope is a 4-port dual-beam antenna that operates from 694 to 896 MHz. This single panel design supports two separate beams perfectly optimized at horizontal pointing angles of +27 degrees and –27 degrees from boresight. It delivers a gain of under 18.7 dBi and can handle a power of up to 250 watts.
 
Download Datasheet | Product Details
 
Power Sensor
Compact Directional Power Sensor from 100 MHz to 1000 MHz

Power Sensor from Bird Technologies

The Model 4042 from Bird Technologies is a directional power sensor that operates from 100 MHz to 1000 MHz. It provides both forward and reflected composite power measurements with ±5 % of full scale accuracy and has a power range up to 500 W and is also NIST traceable. This sensor is intended for use at the transmit combiner output, in order to provide both composite output from the combiner power, as well as antenna VSWR information.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
Frequency Synthesizer with two RF outputs from 1.925 - 8 GHz and 7.7 - 16 GHz

Frequency Synthesizer from STMicroelectronics

The STuW81300 from STMicroelectronics is a dual architecture frequency synthesizer (Fractional-N and Integer- N) that generates two RF outputs from 1.925 - 8.0 GHz and 7.7 - 16.0 GHz. It has four integrated low phase noise VCOs with a fast automatic center frequency calibration within a single device.
 
Download Datasheet | Product Details
 
Laminate
High Frequency Ceramic-Filled Laminates with Woven Fiberglass

Laminate from Rogers Corporation

The RO3203 from Rogers Corporation are ceramic-filled laminates reinforced with woven fiberglass. The dielectric constant of RO3203 high frequency circuit materials is 3.02 with a dissipation factor of 0.0016 up to frequencies as high as 40 GHz. RO3200 series laminates are manufactured under an ISO 9002 certified quality system.
 
Download Datasheet | Product Details
 
RF Switch
GaN SPDT Switch from 0.5 to 6 GHz

RF Switch from RF-Lambda

The RFSP2TR5M06G from RF-Lambda is a reflective coaxial SPDT GaN switch that operates from 0.5 to 6 GHz. It has an insertion loss of less than 1.5 dB, isolation of more than 35 dB and switching speed of under 100 ns. The switch can handle an input power of over 100 W and requires a supply voltage of 5 V. It is available in a module with N-type female connectors.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
 
 
 
RF Amplifier
21 dBm Low Noise Amplifier from 0.5 to 18 GHz

RF Amplifier from Planar Monolithics Industries

The PE2-500M18G-5R0-21-12-SFF from PMI is a low noise amplifier that operates from 0.5 to 18 GHz. It provides a gain of more than 24 dB with a noise figure of under 5 dB and a P1dB of 21 dBm. The amplifier requires a supply voltage of 12 to 15 V DC while consuming up to 375 mA of current. It is available in a module with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
Standalone RF Shielded Test Enclosure up to 75 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-24144 from RF Electronics is a standalone RF Shielded Test Enclosure that operates at frequencies up to 75 GHz (Higher frequency options also available). It is equipped with a thick RF absorbing foam that provides a reflection loss of more than -23 dB @ 60 GHz and higher frequencies.
 
Download Datasheet | Product Details
 
Power Divider
12 Way Power Divider from 0.7 to 6 GHz

Power Divider from VidaRF

The VPD0760A12 from VidaRF is a 12 Way Power Divider that operates from 0.7 to 6 GHz. This power divider can handle up to 30 watts of power and has a low insertion loss and high isolation. It also has a low amplitude and phase balance. The power divider is available in a module with SMA Female connectors.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.