1. everything RF
  2. RF Newsletters
more
PREV 10th July, 2017 NEXT

Latest News & White Papers this Week

10 July, 2017 - everything RF Newsletter
 
everything RF
Date: 10 July, 2017
 
Sponsored by Richardson RFPD
 
 
 
Top News Stories this Week
Researchers Develop New Strategy for Improving Underwater Communications - Berkeley Lab
Researchers Demonstrate 3D Imaging of Objects Through Walls Using an Ordinary Wireless Signal - UC Santa Barbara
Lockheed Testing its Second GPS III Satellite Ahead of Launch in 2018 - Lockheed Martin
AT&S Introduces PCB & Interconnection Technologies for up to 80 GHz - AT&S
Industry's First Halogen-Free Multi-Layer Circuit Board Material for Wireless Base Stations - Panasonic
New EMI Noise Suppression Sheets Mitigate Noise up to 40 GHz - Molex
Signal Quality Analyzer to Verify Next-generation High-speed Interface Designs - Anritsu
ZTE Showcases its 5G Integrated Solution at MWC Shanghai 2017 - ZTE Corporation
Laird Introduces Multi-wireless Sensor Platform for Long-Range Enterprise IoT Applications - Laird
LG’s Latest Flagship Smartphone Features IDT's Wireless Power Solution - IDT
More News
New White Papers
Learn How a Microwave DAC Simplifies Direct Digital Synthesis from DC to 26.5 GHz - Teledyne e2V
Bluetooth Low Energy (V5.0) RF-Test for Internet of Things Applications - Rohde & Schwarz
Achieve MIMO Performance at Nearly Half the Cost with Interleaved MIMO - CommScope
RF Innovation and the Transition to 5G Wireless Technology - Resonant Inc
The Power of ZigBee® 3.0 - Qorvo
More White Papers
Upcoming Event
Event Image
EDI CON USA 2017

Date: 11 to 13 September, 2017

Location: Boston, MA, United States

 
More Upcoming events
Sponsored by Richardson RFPD
AD9363
Powerfully Efficient: The new AD9363 Integrated SDR Transceiver
Analog Devices’ AD9363 is a high-performance, highly-integrated RF agile transceiver designed for use in 3G and 4G femtocell applications. Enhanced integration simplifies system development, reducing component count and BOM costs, while achieving smaller size and higher power efficiency. Click here to learn more.
 
 
 
Featured Products this Week
RF Amplifier
GPS Low Noise Amplifier for L1 and L2 Bands

RF Amplifier from NuWaves Engineering

The HILNA GPS Low Noise Amplifier from NuWaves has been designed to operate at the L1 (1575.43 MHz) and L2 (1227.6 MHz) GPS frequencies. It provides a high gain of 32 dB, low noise figure of under 1 dB and a high third-order intercept point specifically for L1 (1575.43 MHz) and L2 (1227.6 MHz) GPS signals.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
Table Top RF Shielded Test Enclosure for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing

RF Shielded Test Enclosure from RF Electronics

The HDRF-1070 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz (options up to 60 GHz are available). It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 2.4 GHz in each chamber. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
RF Amplifier
2000 W Solid-State Pulsed Amplifier from 1.2 to 1.4 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 2000SP1z2G1z4 from AR RF/Microwave Instrumentation is a self-contained, forced-air-cooled, solid-state amplifier that operates from 1.2 to 1.4 GHz. It delivers over 2000 watts of peak RF pulse power with a gain of more than 63 dB and a noise figure of 15 dB. The amplifier is ideal for RF pulse susceptibility testing, Industrial and University Research and Development, and Service applications.
 
Download Datasheet | Product Details
 
RF Amplifier
8 W Solid State Amplifier from 3 to 8 GHz

RF Amplifier from Exodus Advanced Communications

The AMP1090 from Exodus Communication is a Class AB solid state amplifier that operates from 3 to 8 GHz. This amplifier provides an output of more than 8 W (CW) with a gain of over 40 dB and flatness of 3 dB. It can be used for all channel modulation standards. The amplifier requires a 30 V supply and draws 2.5 Amps of current.
 
Download Datasheet | Product Details
 
Power Divider
6 Way Power Divider from 0.6 to 6 GHz

Power Divider from VidaRF

The VPD0760A6A from VidaRF is a 6 Way Power Divider that operates from 0.7 to 6 GHz. This power divider can handle up to 30 watts of power and has a low insertion loss and high isolation. It also has a low amplitude and phase balance. The power divider is available in a module with SMA Female connectors.
 
Download Datasheet | Product Details
 
Antenna
Flexible Antenna for 4G/LTE and MIMO

Antenna from Antenova

Moseni (SRFL029) from Antenova is a flexible printed circuit antenna for 3G, 4G and LTE applications including MIMO systems. This plug and play antenna has an efficiency of over 60% through the band from 689 MHz to 2690 MHz. It has a 1.13 mm diameter cable with an IPEX MHF connector and is available with 3 standard cable lengths for easy integration into any design.
 
Download Datasheet | Product Details
 
Power Sensor
10 MHz to 33 GHz Three-Path Diode Power Sensors

Power Sensor from Rohde & Schwarz

The R&S NRP33SN-V from R&S is a Three-Path Diode Power Sensor for TVAC (Thermal Vacum) Applications. This power sensor operates from 10 MHz to 33 GHz with a measurement range from 100 pW to 200 mW (93 dB dynamic range). In the satellite sector, components, subsystems and entire satellites must be qualified in a thermal vacuum (TVAC) before they can be used in space.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Real-Time OEM Spectrum Analyzer from 9 kHz to 20 GHz

RF Spectrum Analyzer from Aaronia AG

The Spectran HF-80200 V5 OEM from Aaronia is a Real Time Spectrum Analyzer that operates from 9 kHz to 20 GHz with a real time analysis bandwidth of up to 175 MHz. It has a very fast sweep time that enables it to scan 20 GHz of spectrum in less than 20 m seconds. The analyzer is available with a 3D Real-Time Spectrum monitoring and recording Software.
 
Download Datasheet | Product Details
 
RF Test Set
Test System for NFC & Contactless Payments

RF Test Set from Keysight Technologies

The T3100S Series NFC test systems from Keysight are essential tools for testing NFC and contactless payment devices. From chipsets to cards, terminals, and mobile devices, T3100S Series test systems cover all product development phases from R&D to pre-conformance and final certification. Each of the T3100S Series systems is built around the Keysight T1141A NFC Test Set.
 
Download Datasheet | Product Details
 
Analog to Digital Converter
14-Bit Dual Analog-to-Digital Converter

Analog to Digital Converter from Analog Devices

The AD9208 A/D converter meets the increased spectral efficiency demands of 4G/5G multi-band wireless communications base stations. Based on 28nm CMOS technology, the AD9208 delivers industry leading bandwidth and dynamic range to cover the largest number of signal bands. It also features low-noise spectral density for diversity radio and I/Q demodulation systems, while consuming half of the power, when compared to alternative solutions.
 
Download Datasheet | Product Details
 
RF Switch
Low PIM, High Reliability Long Life Electromechanical Switches from DC to 18 GHz

RF Switch from AtlanTecRF

The ASPDT series are a range of high reliability, long life electromechanical switches that operate from DC to 18 GHz. This switch is available in multiple configurations from SPDT through to SP10T. The switches have a low insertion loss of under 0.7 dB and a high isolation over 70 dB. They can be used in the automatic test equipment and communications industries where reliability, consistency and performance are key.
 
Download Datasheet | Product Details
 
Digital Phase Shifter
1 to 2 GHz, 20 dBm USB Digital Phase Shifters

Digital Phase Shifter from Telemakus

The TEP2000-4 is a digital RF phase shifter for with a 400 degree phase range and a low insertion loss of 4 dB. It operates from 1 to 2 GHz and is powered by a USB Interface. The phase shifter can be controlled with a GUI on any windows based computer. It is a 12 bit phase shifter with a 0.25 degree resolution. The TEP2000-4 can handle up to 20 dBm of input power.
 
Download Datasheet | Product Details
 
RF & Microwave Isolator
19 to 21 GHz Micro-Strip Isolator to Protect Space Communication Payload Electronics

RF & Microwave Isolator from HXI

The 2W9NCA-S from HXI is a micro-strip isolator that operates from 19 to 21 GHz for space applications. It can handle up to 1 W of power, has an isolation of 18 dB and an insertion loss of 1 dB. The device is available in a compact 0.400 x 0.275 x 0.150 size and meets all of the NASA outgassing requirements. It is ideally suited to protect space communication payload electronics.
 
Download Datasheet | Product Details
 
Signal Generator
0.01 to 20 GHz Dual Output Low Noise Synthesizer/ Signal Generator

Signal Generator from AnaPico

The DUAL-APSYN420 from AnaPico is a Dual Output Phase Synchronous Low Phase Noise Frequency Synthesizer/Signal Generator that generates signals with frequencies from 0.01 to 20 GHz. It has a resolution of 0.001 Hz and delivers an output power of up to 23 dBm at both ports. The module outputs can be independently programmed and can be operated from a single internal reference to maximize the phase coherence between the two outputs.
 
Download Datasheet | Product Details
 
Waveguide Rotary Joint
Waveguide Rotary Joint from 50 to 75 GHz

Waveguide Rotary Joint from Millitech

The WRJ-15 from Millitech is a Waveguide Rotary Joint that operates from 50 to 75 GHz. It has an insertion loss of 1 dB and can handle 350 Watts of power with an VSWR of 1.5:1. This Waveguide Rotary Joint allows the transmission of RF signals from stationary to a 360 rotating rectangular waveguide, making it ideal for mechanically scanned antennas, automatic test systems and axial ratio measurement.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
Digital Programmable Step Attenuator for X-Band Radar and Satellite Links

RF Variable Attenuator from DS Instruments

The DAT64H from DS Instruments is a Digital Programmable Step Attenuator that operates from 100 MHz to 12 GHz. It has an attenuation range of 0 - 63 dB with 0.5 dB steps. The attenuator has an insertion loss of 10 dB and can handle an input power of up to 22 dBm. It is available in a laser-etched solid aluminum enclosure that measures 2.75 x 1.25 x 2 inches with SMA connectors.
 
Download Datasheet | Product Details
 
Sponsored by Richardson RFPD
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.