1. everything RF
  2. RF Newsletters
more
PREV 31st July, 2017 NEXT

Latest News & White Papers this Week

31 July, 2017 - everything RF Newsletter
 
everything RF
Date: 31 July, 2017
 
RF & Microwave Company Directory
 
 
 
Latest News Stories
Fujitsu Achieves World's Highest Output Power in the W-Band with a GaN Power Amplifier - Fujitsu
Indian Space Agency Develops Ship Borne Transportable Antenna Terminal - ISTRAC
Fraunhofer Institute Introduces Adjustable Multibeam Antenna for RFID Applications - Fraunhofer IIS
NI Introduces Multiple Antenna Support for Testing MIMO Applications to Further 5G Research - National Instruments
Mercedes To Launch Wireless Charging System for its Electric Cars In 2018 - Mercedes-Benz
World’s First Test Solution for A-BeiDou Location Based Services - Rohde & Schwarz
Toshiba BLE Product Lineup Supports New Bluetooth Mesh Standard - Toshiba
Why Space Dust Emits Radio Waves Upon Crashing Into a Spacecraft - AIP Publishing
Qualcomm Introduces Support for Standardized Bluetooth Mesh Networking - Qualcomm
Samsung and Arqiva to Conduct UK’s First 5G Trials with a Focus on Fixed Wireless Access - Samsung
More News
New White Papers
Innovative Solutions Using RF Energy in Medicine - NXP
The Path to 5G - Defining What’s Possible - Qorvo
Advantages of Integrating Direct RF-Sampling Solutions - XILINX
Key Parameters for Selecting RF Inductors - Coilcraft
New RF DAC Broadens Software-Defined Radio Horizon - Analog Devices
More White Papers
Upcoming Event
Event Image
EuMW 2017

Date: 8 to 13 October, 2017

Location: Nuremberg, Germany

 
More Upcoming events
Featured Products this Week
RF Variable Attenuator
7-bit Solid State Attenuators from 20 MHz to 3 GHz

RF Variable Attenuator from dBm Corporation

The SSA series of solid state attenuators from dBm are 7-bit Digital Attenuators that operate from 20 MHz to 3 GHz. These attenuators have an attenuation range from 0 to 95 dB with a resolution of 1 dB. They have an insertion loss of under 7.5 dB and a fast switching speed of less than 16 us. These solid state attenuators can also be configured in groups of up to 16.
 
Download Datasheet | Product Details
 
Signal Generator
Dual Channel Software Tunable Signal Generator from 54 MHz to 13.6 GHz

Signal Generator from Windfreak Technologies

The SynthHD PRO from Windfreak Technologies is a dual channel software tunable RF signal generator and frequency sweeper that operates from 54 MHz to 13.6 GHz. The generator is controlled and powered by a Device running Windows or Android via a USB port. Its dual independent channels can be configured to run at two different frequencies, or the same frequency with different phases.
 
Download Datasheet | Product Details
 
RF Amplifier
250 Watt TWT Power Amplifier from 6 to 18 GHz

RF Amplifier from Ophir RF

The 6530 from OphirRF is a TWT power RF amplifier that operates from 6 to 18 GHz. It provides saturated output power of 250 watts and gain of more than 35 dB with a noise figure of 35 dB. It is available in a rackmount module that measures 12.25 x 19 x 28.5 inches with N-type connectors or waveguide interface and has a one year manufacturer warranty.
 
Download Datasheet | Product Details
 
RF Mixer
Balanced Waveguide Mixers from 26.5 to 140 GHz

RF Mixer from Millitech

The MXP Series from Millitech is a range of high performance broadband mixers that operate from 26.5 to 140 GHz in seven waveguide bands from WR-28 through WR-08. The mixers have a LO drive power of 13 dBm, low conversion loss of under 6 dB and isolation over 25 dB (LO/RF and LO/IF). Special designs with LO input waveguide in a higher or lower waveguide band can be provided.
 
Download Datasheet | Product Details
 
RF Repeaters
16 Port Digital GPS Signal Repeater

RF Repeaters from Microlab

The GPSR116 from Microlab is a 16 ports digital GPS repeater that operates in the GPS L1 (1575.42 MHZ) band. This digital GPS repeater system can be used for cellular communications UTC synchronization for locations where the GPS signals are not readily available. The system is built with Microlab’s patent-pending Digital SkyTiming Technology offering GPS signal transmission via CPRI for highly accurate timing and location.
 
Download Datasheet | Product Details
 
RF Mixer
Double Balanced Passive Mixer from 2 to 14 GHz

RF Mixer from Linear Technology

The LTC5548 from Linear Technology is a double balanced passive mixer that can be used for upconversion and downconversion. The mixer has a differential IF port from DC to 6 GHz, with a recommended IF frequency of below 500 MHz since it includes an integrated IF Balun. The RF Balun are optimized for a frequency range from 2 to 14 GHz.
 
Download Datasheet | Product Details
 
GNSS Module
GPS Receiver Module for Positioning, Tracking and Navigation

GNSS Module from Linx Technologies

The F4 Series from Linx Technologies is a self-contained high-performance GPS receiver module. It provides an exceptional sensitivity of -159.5 dBm, even in dense foliage and urban canyons. The GPS module can acquire and track up to 48 satellites simultaneously in just seconds, even at the lowest signal levels. It operates at a low supply of 1.8 V and provides five GPIO lines that allow the application software to monitor and control events without the need of a microcontroller.
 
Download Datasheet | Product Details
 
Termination
50 Ohm and 100 Ohm High Power Chip Terminations from DC to 18 GHz

Termination from API Technologies - Inmet

The NPC20-40 series from API Inmet are chip terminations that operate from DC to 18 GHz. They can handle up to 1 Watt of power and have a VSWR of 1.25:1. The chips are fabricated on a Berylium Oxide Ceramic substrate with a Tantalum Nitride resistor. These terminations are available in standard impedance values of 50 and 100 ohm in a 0204 (.020" x .040") footprint.
 
Download Datasheet | Product Details
 
Waveguide Coupler
Bi-Directional Waveguide Couplers from 26.5 to 110 GHz

Waveguide Coupler from MI-WAVE

The 555 Series from MI-Wave are Bidirectional Waveguide Couplers that operate from 26.5 to 110 GHz. They are available in 3, 6, 10, 20, 30 and 40 dB coupling values. These couplers have a directivity of 30 dB and a VSWR of up to 1.10:1. This series is available in waveguide sizes WR-34, WR-51, WR-62, WR-75 and WR-90.
 
Download Datasheet | Product Details
 
Power Sensor
USB Thermocouple Power Sensor from 10 MHz to 50 GHz

Power Sensor from Keysight Technologies

The U8487A from Keysight is an USB Thermocouple Power Sensor that can measure power for modulated and CW RF signals from 10 MHZ to 50 GHz. It has a 55 dB dynamic range and carry out more than 900 readings per second. These power sensors are ideal for applications ranging from PNA/MXG calibration to high volume manufacturing.
 
Download Datasheet | Product Details
 
Voltage Controlled Oscillator
Plug-in VCO from 75 to 150 MHz

Voltage Controlled Oscillator from Mini Circuits

The POS-150+ from Mini Circuits is a plug-in VCO that operates from 75 MHz to 150 MHz. It has an excellent harmonic suppression of -23 dBc, low load pull of 0.8 MHz and can provide up to 9.5 dBm output power. The device has tuning sensitivity up to 6.7 MHz/V and tuning voltage up to 16 V. It is available in hermetically sealed package and is a RoHS complaint.
 
Download Datasheet | Product Details
 
Dual Directional Coupler
0.5 GHz to 8 GHz, SMA-Female Dual Directional Coupler

Dual Directional Coupler from KRYTAR

The 500508010 from Krytar is a dual directional coupler which operates from 0.5 GHz to 8 GHz. It has a coupling of 10 dB, a directivity of 15 dB, a frequency sensitivity of 0.6 dB, VSWR of 1.35:1, an insertion loss of 2.3 dB and can handle up to 3 kW of power. The coupler has SMA- Female connectors and weighs 7 Oz.
 
Download Datasheet | Product Details
 
RF & Microwave Circulator
200 Watt, Coaxial Circulators from 700 MHz to 5 GHz

RF & Microwave Circulator from UIY Technology

The UIYCC2528A Series of Coaxial Circulators from UIY are available in a number of frequency configurations from 700 MHz to 5 GHz. They have an insertion loss as low as 0.3 dB with isolations of 20 dB. The circulators can handle up to 200 watts of forward power and are available with SMA and N Type connectors. They can be used for a number of military, space and commercial applications.
 
Download Datasheet | Product Details
 
Band Pass Filter
Tunable Bandpass Filters from 1.5 MHz to 700 MHz

Band Pass Filter from Pole/Zero

The MINI-POLE series of tunable bandpass filters from MPG Pole Zero operate from 1.5 MHz to 700 MHz covering 8 bands. They have a tuning speed of 10 µS and can handle up to 1.25 watts of input power. These filters require a supply voltage of 5 to 100 V DC and consume up to 250 mA of current. They are available in surface mount package.
 
Download Datasheet | Product Details
 
RF & Microwave Company Directory
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.