1. everything RF
  2. RF Newsletters
more
PREV 2nd August, 2017 NEXT

New RF & Microwave Products this Week

2nd Aug, 2017 - everything RF Newsletter
 
everything RF
Date: 2nd Aug, 2017
 
RF & Microwave Company Directory
 
 
 
New RF Products this Week
RF Amplifier
25 W GaN MMIC Power Amplifier from 2.7 to 3.5 GHz

RF Amplifier from Wolfspeed, A Cree Company

The CMPA2735015S from Wolfspeed is a GaN HEMT-based MMIC power amplifier that operates from 2.7 to 3.5 GHz. This MMIC contains a two-stage reactively matched design approach that enables very wide bandwidths to be achieved. It provides a signal gain of more than 33 dB and a saturated output power of up to 25 W with a power added efficiency up to 56%.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
53.125 MHz to 13.6 GHz Wideband Synthesizer with Integrated VCO

Frequency Synthesizer from Analog Devices

The ADF5356 is a frequency synthesizer that generates RF signals from 53.125 MHz to 13.6 GHz without any gaps in frequency coverage. This wideband frequency range allows the device to be used as a multiband synthesizer, thus eliminating the need for multiple band-specific VCOs/synthesizers products and thereby reducing component count, board space, and power.
 
Download Datasheet | Product Details
 
Diplexer
LTE Ready Diplexer for 698 to 960 MHz/1900-AWS Bands

Diplexer from Kaelus

The DBC0037F1V1-1 from Kaelus is a diplexer that combines 698 MHz to 960 MHz frequency bands with the higher 1900-AWS frequency bands. This diplexer is designed to minimize infrastructure capital expenditure and improve network reliability. It can handle an average power of up to 500 watts and 5 kW of peak power with an isolation of over 60 dB between the bands.
 
Download Datasheet | Product Details
 
RF Amplifier
1 Watt GaN SSPA Module from 2 to 40 GHz

RF Amplifier from I2R Nanowave

The NW0240-31 from I2R Nanowave is a is a three stage, GaN high power amplifier that operates from 2 to 40 GHz. It provides a saturated output power of more than 30 dBm and a power gain of 26 dB. The amplifier provides more than 10 dB harmonic suppression and 15 dB intermodulation product suppression when operating at an output power of 30 dBm.
 
Download Datasheet | Product Details
 
RF Switch
General Purpose SP8T Switch from 5 MHz to 6 GHz

RF Switch from Qorvo

The QPC6082 from Qorvo is a low loss, high isolation SP8T switch that operates from 5 MHz to 6 GHz. This switch provides an isolation of 31 dB while maintaining a low insertion loss of 0.4 dB. It can handle an input power of up to 32 dBm. The switch is available in a 14 pad 2 mm x 2 mm x 0.55 mm QFN package and is ideal for IoT, automotive, cellular modems and LTE applications.
 
Download Datasheet | Product Details
 
RF Amplifier
0.01 to 18.0 GHz Portable Amplifier

RF Amplifier from Planar Monolithics Industries

The PLNA-35-100M18G-P1dB24-120VAC from PMI RF is a portable amplifier that operates from 0.01 to 18 GHz. It provides a gain of 40 dB with a noise figure of 3 dB and a P1dB of more than 24 dBm. The amplifier requires a supply voltage of 110 V AC while consuming up to 10 dBm of input power. It is available in a module that measures 3 x 3 x 1.75 inches with N-type connector.
 
Download Datasheet | Product Details
 
RF & Microwave Company Directory
 
 
 
Antenna
Multi Function GNSS Chip Antenna for GPS, Glonass, Compass Applications

Antenna from INPAQ

The ACLX-5036-A1-CC-S from INPAQ is a multi function chip antenna that supports GPS, Glonass, Compass (all bands) applications. This linear polarized antenna delivers a gain of up to 4.9 dBi with an efficiency of 82%. It is available as a chip that measures 5.2 x 3.7 x 0.7 mm.
 
Download Datasheet | Product Details
 
RF Switch
High Power & High Linearity SPDT Switch from 0.5 to 6 GHz

RF Switch from Infineon Technologies

The BGS12PN10 from Infineon is a SPDT switch that operates from 0.5 to 6 GHz. It can handle up to 38 dBm of input power, while exhibiting a low insertion loss. The switch requires a single supply voltage of 1.8 to 3.6 V and is driven by a simple, CMOS or TTL compatible control input signal. This RoHS and WEEE compliant switch is ideal for EDGE / C2K / LTE / WCDMA / SV-LTE, Mobile cellular Rx/Tx and cellular base station applications.
 
Download Datasheet | Product Details
 
Limiter
2 to 20 GHz Power Limiter

Limiter from Aelius Semiconductors

The ASL 11001 from Aelius Semiconductors is a power limiter that operates from 2 to 20 GHz with 3 dBm power limiting. The die is fabricated using a reliable 0.15 µm InGaAs pHEMT technology and measures 1.6 x 1.6 x 0.1 mm. It is ideal for limiting amplifiers and protective circuitry applications.
 
Download Datasheet | Product Details
 
Antenna
Dual Polarized Point to Multipoint Sector Antenna from 3 to 3.8 GHz

Antenna from Radio Waves

The SECD-3.5SL-60-10 from Radio Waves is a Slim Sector Antenna that operates from 3 to 3.8 GHz. This Dual H & V polarized antenna delivers a gain of 10 dBi and can sustain 155 mph survival wind load. The 0.2 m | 0.75 ft antenna is available with dual N-type connectors and is ideal for public spaces, commercial, as well as enterprise applications. It comes with 7 years manufacturer warranty.
 
Download Datasheet | Product Details
 
Laminate
Copper-Clad Laminate for RF Applications

Laminate from Park Electrochemical Corp

The Meteorwave 3350 from Park Electrochemical is a copper-clad laminate designed for RF applications requiring a tightly controlled 3.5 Dk. This laminate has very stable Dk and Df over a wide range of frequencies and environmental conditions. It is available globally in multiple laminate thicknesses starting from 0.002” and up.
 
Download Datasheet | Product Details
 
Antenna
Weatherproof Ultra-Flex Omni-Directional Antenna from 2.2 to 2.5 GHz

Antenna from Southwest Antennas

The 1085-148 from Southwest Antennas is an omni-directional antenna that operates from 2.2 to 2.5 GHz. It delivers a gain of 4 dBi and can handle a power of up to 50 watts. This antenna has a two section collinear design and a weatherproof ultra-flex sealed spring base with a black chrome TNC male connector.
 
Download Datasheet | Product Details
 
Antenna
LTE Ceramic SMT Antenna for 4G/3G/2G Applications

Antenna from Taoglas

The PA.26A from Taoglas is an Ultra-Wideband LTE/Cellular/CDMA antenna that operates from 698 to 960 MHz and from 1710 to 2690 MHz. It delivers a gain of more than 1.13 dBi with an efficiency of over 40.83 % and can handle a power of up to 5 W. This surface mount ceramic antenna measures 35 x 5 x 6 mm and is ideal for IoT, wireless LTE M2M devices, medical devices, first responder and emergency services aaplications.
 
Download Datasheet | Product Details
 
RF Inductor
0.22 µH to 33 µH High Current Inductors with e-field Shield

RF Inductor from Vishay

The IHLE-3232DD-51 Series from Vishay are high current inductors available in thirteen inductance values ranging from 0.22 µH to 33 µH. They have an integrated e-field shield for maximum EMI reduction, with 20 dB e-shielding at 1 cm. This series has a SRF ranging from 6.1 MHz to 117 MHz. The inductors are ideal for notebook, desktop, POL converters, telecom infrastructure & server applications and have a current ratings up to 32 A.
 
Download Datasheet | Product Details
 
Dual Directional Coupler
40 dB Dual Directional Coupler from 1 GHz to 6 GHz

Dual Directional Coupler from TRM Microwave

The DDH 4016 from TRM Microwave is a 40 dB Dual Directional Coupler that operates from 1 GHz to 6 GHz. It has a directivity of more than 18 dB, an insertion loss of under 0.2 dB and a VSWR 1.50:1. The dual directional coupler is availavle in a module with connectors.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
26.5 to 40 GHz, 90 Degree Hybrid Coupler

90 Degree Hybrid Coupler from Panda Microwave

The HC265400-992 from Panda Microwave is a 90 Degree Hybrid Coupler that operates from 26.5 to 40 GHz. This hybrid coupler can handle up to 20 watts of average power and up to 3 kW of peak power. It has an insertion loss of less than 2 dB and isolation over 14 dB. The HC265400-992 is available in a module that measures 43.7 x 21.9 x 12.7 mm with 2.92 mm female connectors.
 
Download Datasheet | Product Details
 
Voltage Controlled Oscillator
10 MHz to 32 GHz Phase Locked Voltage Controlled Oscillators

Voltage Controlled Oscillator from AtlanTecRF

The APV Series of Phased Locked VCO's from AtlanTecRF can be tuned to have a fixed output frequency from 10 MHz to 32 GHz. These compact Oscillator units can be used in communication systems as a high quality local Oscillator with the ability to lock to a high stability external reference of 10 MHz or 100 MHz.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.