1. everything RF
  2. RF Newsletters
more
PREV 7th Aug, 2017 NEXT

Latest News & White Papers this Week

7 August, 2017 - everything RF Newsletter
 
everything RF
Date: 7 August, 2017
 
Sponsored by EDICON
 
 
 
Industry News
Fractal Antenna Systems Confirms Breakthrough Metamaterial Antenna Technology - Fractal Antenna Systems
World’s Smallest and Highest Performance 5G LTE Base Station - Artemis Networks
Anritsu Earns GCF Approval for More than 80% of Cat-M1 Test Cases - Anritsu
Lockheed Martin Invests $350 Million in State-of-the-Art Satellite Production Facility - Lockheed Martin
New Integrated Testing Solution for Simultaneous Cellular and WiFi Testing - Keysight
Empower RF to Conduct Remote Live Demonstrations for their 1 KW 1 to 3 GHz Amplifier at the EMC Show - Empower RF
Pasternack Introduces Heat Sinks for High Power RF Amplifiers - Pasternack
Nuwaves Unveils 100 W L & S-Band Radio Frequency Power Amplifier Module - NuWaves Engineering
7layers Now Supports New Antenna Performance Evaluation for LoRa Devices - 7layers
New Hybrid Integrated Platform to be The Face of Next-Generation Electronics - ARC
FCC Approves Apple's Application to Test Millimeter Wireless Tech for 5G Applications - DSL Reports
More News
White Papers
Bluetooth 5 - From Cable Replacement to the IoT - Rohde & Schwarz
New RF DAC Broadens Software-Defined Radio Horizon - Analog Devices
Learn How a Microwave DAC Simplifies Direct Digital Synthesis from DC to 26.5 GHz - Teledyne e2V
RFID Benefits for the Manufacturing Process - NXP Semiconductors
5G Massive MIMO Outdoor Communications Analysis - Remcom
More White Papers
Upcoming Events
Event Image
RFIT 2017

Date: 30 August to 1 September, 2017

Location: Seoul, Korea

 
More Upcoming events
Sponsored by EDICON
EDICON
EDI CON – September 11-13, Boston, MA – Join the High-Frequency High-Speed Revolution!
EDI CON is the first industry event in the USA to bring together RF, microwave, EMC/EMI, and high-speed digital design engineers and system integrators for networking, product demonstrations, training, and learning opportunities. Register today with code READ20MWJ to save 20% off your Conference Pass! Click here to learn more
 
 
 
Featured Products this Week
RF Cable Assembly
Ultra Low Loss Cable Assemblies up to 110 GHz

RF Cable Assembly from MegaPhase

The Phase3 from MegaPhase are ultra low loss cables that operate up to 110 GHz. These cables are optimized for consistent and repeatable performance where the demand is minimum attenuation, high shielding effectiveness and low VSWR. They can be used to make cable assemblies with 1 mm, 1.85 mm, 2.4 mm, 2.9 mm, 3.5 mm, Type-N, TNC and SMA connectors.
 
Download Datasheet | Product Details
 
Fixed Attenuator
2.5 W Fixed Attenuators from DC to 2.5 GHz

Fixed Attenuator from MECA

The 615-xx-1 series from MECA are fixed attenuators that operate from DC to 2.5 GHz. They can handle an average input power of up to 2.5 Watts and a peak power of 1 kW. The attenuators are available with attenuation levels from 30 dB to 95 dB. These attenuators have a VSWR less than 1.25:1 and are available with N Type male/female connector types.
 
Download Datasheet | Product Details
 
RF Power Meter
Power Meter for 75 GHz to 3 THz Applications

RF Power Meter from Virginia Diodes, Inc.

The VDI Erickson PM5 Power Meter from Virginia Diodes is a calibrated calorimeter-style power meter for applications with a frequency range from 75 GHz to over 3 THz. It offers power measurement ranges from 1 µW up to 200 mW. The PM5 has a VSWR of 1.15:1 and requires a supply from 90 to 240 V to operate. The sensor head has a WR10 input and VDI sells a variety of input waveguide tapers for use at other frequencies.
 
Download Datasheet | Product Details
 
RF Switch
SP40T Pin Diode Switch from 2.8 to 3.1 GHz

RF Switch from American Microwave Corporation

The MSR-40DR-NG from American Microwave Corporation is a SP40T pin diode switch that operates from 2.8 to 3.1 GHz. The switch has an insertion loss of 9.5 dB with an isolation of more than 50 dB and a VSWR of 2.0:1. It can handle up to 5 watts of power and has a switching speeds of below 1 uS. The switch requires a supply voltage of -5 to 5 V while consuming upto 2 A of current.
 
Download Datasheet | Product Details
 
RF Amplifier
8 W Solid State Power Amplifier from 2 to 20 GHz

RF Amplifier from Exodus Advanced Communications

The AMP1120 from Exodus Advanced Communications is a solid state power amplifier that operates from 2 to 20 GHz. This amplifier has been developed using a class AB linear GaAs design and delivers a gain of more than 36 dB with an output power of 8 watts and has a return loss of over 10 dB. The amplifier requires a supply voltage of 12 V DC and consumes up to 4 A of current.
 
Download Datasheet | Product Details
 
RF Amplifier
E-Band Power Amplifier from 76 to 81 GHz

RF Amplifier from SAGE Millimeter

The SBP-7638131610-1212-S1 from Sage Millimeter is a power amplifier that operates from 76 to 81 GHz. It provides a small signal gain of 16 dB and a minimum P1dB of 10 dBm. The amplifier requires a supply voltage of 8 VDC while drawing 150 mA of current. It is available in a module that measures 1.10 x 1.70 x 0.50 inches, with a WR-12 Waveguide interface and UG-387/U flange at the input and output port.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
3 Hz to 110 GHz UXA Multitouch Signal Analyzer

RF Spectrum Analyzer from Keysight Technologies

The N9041B UXA X-Series signal analyzer from Keysight is the first signal analyser that provides frequency coverage up to 110 GHz and an analysis bandwidth of up to 5 GHz. Apart from its excellent frequency coverage, the N9041B UXA has some unique capabilities with attributes such as advanced front-end circuitry that achieves low loss and efficient mixing, providing a displayed average noise level (DANL) as low as -150 dBm/Hz when characterizing wideband modulated signals in the millimeter-wave band.
 
Download Datasheet | Product Details
 
Microwave Backhaul Radio Links
80 GHz Millimeter Wave Radio Delivering Up to 5.35 Gbps Capacity

Microwave Backhaul Radio Links from BridgeWave

The Flex4G-5000 from BridgeWave Communications is an E-band (70/80 GHz) microwave backhaul with 12” (30 cm) or 24" (60 cm) Antenna. This backhaul solution is available in two models: the Flex4G-5000 ANSI and Flex4G ETSI. The ANSI system delivers up to 5.35 Gbps full duplex capacity per radio, and is scalable to 10.7 Gbps in a 2+0 configuration; the ETSI system delivers 4.7 Gbps full duplex throughput per radio and scales to 9.4 Gbps in a 2+0 configuration.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
Table Top RF Shielded Test Enclosure for 802.11 a/b/g/n/ac, Bluetooth and 3G Device Testing

RF Shielded Test Enclosure from RF Electronics

The HDRF-1070 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz (options up to 60 GHz are available). It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 2.4 GHz. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
GNSS Module
Ultra-Low Power, Compact Multi-Constellation GNSS Patch Antenna Modules

GNSS Module from Telit Communications

The SE868Kx-Ax Series from Telit are multi-constellation GNSS receivers with an intergrated 9 x 9 mm patch antenna. This series simultaneously tracks GPS and Galileo plus either GLONASS or BeiDou, providing positioning data via a standard serial port. They have a sensitivity of up to -162 dBm and consumes under 30 mA of current.
 
Download Datasheet | Product Details
 
RF Test Set
High-performance Test System for 802.11ax Wi-Fi devices

RF Test Set from LitePoint

The IQxel-MW from LitePoint is a test solution for the next generation Wi-Fi technologies. It is ideal for both R&D and high-volume production, delivering high performance verification for the most popular wireless connectivity standards including 802.11, Bluetooth, DECT and ZigBee. The IQxel-MW offers high efficiency parallel testing for up to 16 devices.
 
Download Datasheet | Product Details
 
Termination
DC to 60 GHz Chip Termination

Termination from Barry Industries

The TV0404ZZ-50R0JN-91 from Barry Industries is a thick film on Aluminium Oxide (Al2O3) chip termination that operates from DC to 60 GHz. It can handle up to 250 mW Watts of power with a return loss of 18.5 dB and is matched to 50 Ohms. The termination has solder, epoxy or wire bondable terminals.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise Amplifier from 2 to 18 GHz

RF Amplifier from ERZIA

The ERZ-LNA-0200-1800-18-5.5 from Erzia is a Low Noise Amplifier that operates from 2 to 18 GHz. It provides an output power of up to 23 dBm with a gain of over 16 dB and has a noise figure of less than 4.5 dB. The amplifier requires a supply voltage of 12 V while consuming up to 166 mA of current. It is availabe in a module with SMA female connectors and is ideal for sapce, aerospace, military and satcom applications.
 
Download Datasheet | Product Details
 
Antenna
Low Profile MIMO Cellular Antenna with optional GPS/GNSS

Antenna from TE Connectivity

The 1-2309605-1 from TE Connectivity is a M2M MIMO LTE Antenna for cellular IOT and M2M applications. The antenna delivers a gain of up to 5 dBi and can handle a power of up to 20 W. It has two antenna elements with effective isolation and correlation covering all current global cellular and LTE bands from 698 to 960 MHz/1710 to 3800 MHz.
 
Download Datasheet | Product Details
 
Sponsored by EDICON
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.