Sponsored by Aeroflex / Inmet |  | If a full hex attenuator better fits your specifications, look no further Aeroflex / Inmet is pleased to introduce a more user friendly version of our most popular 2W SMA attenuator; a full hex (FH) body configuration helps minimize the possibility of the attenuator rotating during installation by providing the technician with increased surface by which to secure the device. The same outstanding performance is now available in the Models 6FH (6GHz) and 18FH (18GHz). Standard attenuation values include 0-10, 12, 15, 20, 30 & 40dB. |
|
|
 New RF & Microwave Products this Week |
|
|  | RF Amplifier from Triquint The TQP2453 is a small cell power amplifier module that operates from 1805 to 1885 MHz. It provides up to 2.5 W of RMS output power at the antenna. The module is internally matched to 50 Ohms and provides a gain of 33.6 dB. It is available in a 20 x 20 x 1.5 mm surface mount plastic package. The TQP2453 is ideal for small cell BTS, 3G/4G wireless infrastructure, linearized transmitters, hetrogeneous networks and many other applications. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Triquint The TQP2451 is a small cell power amplifier module that operates from 1930 to 1995 MHz. It has an output RMS power of 2.5 watts with an efficiency of 38%. The amplifier is matched to 50 ohms and has a gain of 35.2 dB. It available in a 20 x 20 x 1.5 mm surface mount package. The TQP2451 can be used in small cell base stations, 3G/4G wireless infrastructure applications and linearized transmitters. Download Datasheet | Product Details
|
| | |
|
|  | Low Noise Amplifier from Parsec Technologies, Inc. The M2M PT1233D from Parsec is a high performance low noise GaAs amplifier that operates from 50 to 2100 MHz. It provides a gain of 23.5 dB, an IP3 of 22.9 dBm and has a noise figure of 0.75 dB. It is ideal for GPS, Mobile TV, DAB, RKE, AMR, Cellular, LTE, Zigbee, SDARS, Wi-Fi and WYLAN Applications. This low noise amplifier requires a supply voltage of 3.3/5 V and is available in a 06-ETSLP package which measures 1.3 x 2.0 mm. Download Datasheet | Product Details
|
| | |
|
|  | Low Noise Amplifier from Pasternack Enterprises Inc The PE15A1013 is a low noise amplifier that operates from 10 to 1000 MHz with a gain of 50 dB and noise figure less than 1 dB. It can be used for both military and commercial applications such as radios, radars and communication. The amplifier requires a 12 V supply and draws 160 mA of current. It is available in a module with SMA connectors. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Pasternack Enterprises Inc The PE15A1001 is a low noise S Band amplifier that operates from 2 to 4 GHz. It provides a high gain of 38 dB, a low noise of under 2 dB and has a saturated power of 13 dBm (0.02 W). It can be used for both commercial and military applications. The amplifier is available in a module with SMA connectors. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Ophir RF The Model 7000 is a four channel broadband power amplifier that operates from 1 MHz to 2.5 GHz. This rack mount amplifier has a high gain, excellent efficiency and a wide dynamic range. It comes with a RS232 controller and a front panel display. The amplifier has a P1dB of 60 Watts on channels 1,2 and 3 and 30 Watts on channel 4. Download Datasheet | Product Details
|
| | |
|
Sponsored by Aeroflex / Inmet |  | Aeroflex-Inmet |
|
|
|  | 90 Degree Hybrid Coupler from Marki Microwave The QH-0R71R3 is a 3 dB quadrature hybrid coupler that operates from 650 to 1300 MHz. It is available in a MLIQ connectorized package with SMA connectors. The QH-0R71R3 can be used with an image reject down-converter, a single sideband up-converter, balanced amplifiers and microwave corelators. It has a low insertion loss, high isolation and low VSWR. Custom designs are also available. Download Datasheet | Product Details
|
| | |
|
|  | Power Divider from MiniRF The MRFSP0012 is a surface mount 4 way power divider that operates from 5 to 1002 MHz. It has a low insertion loss of 0.7 dB and an isolation of over 25 dB with a characteristic impedance of 75 ohms. This splitter can be used for CATV, wireless communication and broadband applications. It can handle up to 2 W of input power. Download Datasheet | Product Details
|
| | |
|
|  | Fixed Attenuator from SemiGen This series of Fixed Attenuator Pads are built on alumina nitride to provide greater thermal conductivity and performance. They operate from DC to 50 GHz with attenuation configuration from 1 to 100 dB. The attenuators have a return loss greater than 16 dB through the band. They are available in a chip size that measures 0.03 to 0.03". Download Datasheet | Product Details
|
| | |
|
|
|
|  | GaN Transistor from Cree The CGH27030S is an unmatched GaN HEMT transistor that operates from DC to 6 GHz. It can provide a power of up to 30 W and requires a 28 V supply for operation. The transistor has been designed for high efficiency, high gain and wide bandwidth capabilities making it ideal for LTE, 4G Telecom and BWA amplifier applications. It is available in a 3 x 4 mm surface mount DFN package. Download Datasheet | Product Details
|
| | |
|
|  | PXI RF Signal Transceiver from National Instruments A vector signal transceiver (VST) is a new class of instrumentation that combines a vector signal generator (VSG) and vector signal analyzer (VSA) with FPGA-based real-time signal processing and control. The Vector signal transceivers from National Instruments also features a user-programmable FPGA, which allows custom algorithms to be implemented directly into the hardware design of the instrument. Download Datasheet | Product Details
|
| | |
|
|  | PXI RF Multiplexer from Pickering Interfaces The 40-883-001 from Pickering is a 50O 6 GHz multiplexer available in 8:1 format (two slot PXI module) or 16:1 format (three slot PXI module). It has a low VSWR and consistent/flat insertion loss over the operating frequency range. The 40-883-001 has been developed using solid state switches to ensure a long life with no wear out mechanism, making it ideal for ATE systems requiring frequent and fast RF switching. Download Datasheet | Product Details
|
| | |
|
|  | PXI RF Vector Network Analyzer from National Instruments The NI PXIe-5632 is a 8.5 GHz PXI vector network analyzer. It takes up 3 slots and has an IF bandwidth from 10 Hz to 500 kHz with a dynamic range greater than 110 dB. The NI PXIe-5632 has a power source from -30 to 15 dBm. It has a dual source architecture with frequency offset capability for measuring frequency translation devices and s-parameters. Download Datasheet | Product Details
|
| | |
|
|  | PXI Signal Analyzer from Agilent Technologies The M9393A is a PXIe vector signal analyzer (VSA) that provides exceptional accuracy up to 27 GHz – It is available in 8.4 GHz, 14 GHz, 18 GHz and 27 GHz configurations. This PXI module enables engineers to validate the true performance of leading-edge and legacy devices with frequency coverage from 9 kHz to 27 GHz and 160 MHz analysis bandwidth. Download Datasheet | Product Details
|
| | |
|
