PREV 28th Aug, 2017 NEXT

Latest News & White Papers this Week

28 Aug, 2017 - everything RF Newsletter
 
everything RF
Date: 28 Aug, 2017
 
AWR Design Forum (ADF)
 
 
 
Latest News this Week
Researchers Develop New Wireless Emulator for 5G Systems - NYU Wireless
New mm-Wave High-Frequency Chip Transmits Gigabits of Data in Seconds - University of California
TAIYO YUDEN Launches Three New Bluetooth 5 Modules - TAIYO YUDEN
NASA Places Third Next-Gen Communications Satellite in Orbit - NASA
Verizon, Ericsson, Qualcomm Record 1.07 Gbps Gigabit LTE Speeds - Qualcomm
A Novel Expandable Antenna Successfully Launches into Orbit on a Microsatellite - University of Toronto
QinetiQ North America Demonstrates Full-Duplex Acoustic Underwater Data Communications - QinetiQ
Airbus Researchers Develop 3D-Printed Metal Waveguide Filters For Telecom Satellites - Airbus Defence and Space
ANSYS Version 18.2 Enhances Visualization and Modelling for Better Antenna Design - ANSYS
ThinkRF Collaborates with Keysight on Spectrum Monitoring and Analysis Solutions - ThinkRF
Fraunhofer Releases New Version of its Radio Channel Model for Future 5G Evaluations - Fraunhofer
More News
New White Papers & Videos
Design a 3D-Printed Metal RF Filter for Aerospace Applications - Airbus
Why is the 60 GHz Band not good for long-range communications? - everything RF Community
The Effect of Low-Quality Antennas on Network Backhaul - RF Solutions
Video: MIMO and Beam-Steering for 5G - National Instruments
An X-band GaN PA MMIC for Phased Array Radar Applications - Plextek RF Integration
More White Papers
Upcoming Event
Event Image
SmarterWorld RF Energy Summit

Date: 17 October, 2017

Location: Erding, Germany

 
More Upcoming events
AWR Design Forum (ADF)
NI AWR
RF/Microwave EDA Software Seminar – ADF India Agenda Available and Registration is Now Open.
The AWR Design Forum (ADF) is an open forum that brings together NI AWR software customers, partners, and microwave/RF engineering professionals to learn, network, and collaborate on the design of today's microwave and RF circuits and systems. Click to Register.
 
 
 
Featured Products this Week
RF Amplifier
12,000 Watt TWT Microwave Amplifier System

RF Amplifier from AR RF/Microwave Instrumentation

The 12000TP4G8 is a 12,000 Watt traveling wave tube (TWT) microwave amplifier system designed for pulse applications from 4 to 8 GHz. It provides a gain between 35 and 70.8 dB with a pulsed output power of over 12,000 Watts with a pulse width of 0.1–40 microseconds. This TWT amplifier provides pulsed RF power for a variety of applications in Test and Measurement, (including EMC RF pulse susceptibility testing), Industrial and University Research and Development, and Service applications.
 
Download Datasheet | Product Details
 
RF Amplifier
2,000 Watt (Peak) Solid State Power Amplifier from 1000 to 2000 MHz

RF Amplifier from Empower RF

The 2206 is a new sclable RF Amplifier system that operates from 1000 to 2000 MHz. The system hardware architecture has been designed to save you money. To increase the power required from the amplifier, you just need to add power amplifier blocks to the system. Adding a 3U power amplifier block is accomplished easily and simply with no phase matching required.
 
Download Datasheet | Product Details
 
RF Amplifier
350 Watt Solid State Power Amplifier from 8 to 12 GHz

RF Amplifier from Exodus Advanced Communications

The AMP4022 is a solid state GaN power amplifier that operates from 8 to 12 GHz. It provides an output power of 350 watts with a gain of over 54 dB. This rack mount amplifier has built-in protection and can widthstand harsh environments. It can be controlled using a control panel on the front of the amplifier system. The amplifier measures 430 x 222 x 600 mm and weighs 35 kgs. It has a built-in fan and SMA/WR90 connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise Amplifier from 0.5 to 2.5 GHz

RF Amplifier from Planar Monolithics Industries

The LNA-35-500M2D5G-0D6-25-12-SFF from PMI RF is a Low Noise Amplifier that operates from 0.5 to 2.5 GHz. It provides a P1dB of 25 dBm with a gain of 35 dB while maintaining a gain flatness of ±1.6 dB and a maximum noise figure of 0.6 dB. The amplifier can accept a maximum input power of 27 dBm. It is available in a compact module with SMA connectors that measures 1.25 x 1.25 x 0.563 inches.
 
Download Datasheet | Product Details
 
Fixed Attenuator
DC to 40 GHz, 20 W Fixed Attenuator Series

Fixed Attenuator from API Technologies - Weinschel

The Model 89 Series of coaxial fixed attenuators operate from DC to 40 GHz. They can handle an input power of up to 20 Watts (CW) and are available with attenuation levels of 10 dB, 20 dB and 30 dB. The attenuators have a VSWR less than 1.40:1 and are matched to 50 ohms. They are available with 2.92 mm male/female connector types.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure for Applications up to 75 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-2260 from RF Electronics is a RF Shielded Test Enclosure that can be used to test devices that operate up to 75 GHz. It has a thick RF absorbing foam that provides a reflection loss of over 23 dB at 60 GHz. The test enclosure has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
Antenna Analyzer
Portable Cable & Antenna Analyzer from 690 MHz to 2700 MHz

Antenna Analyzer from Kaelus

The iVA is a rugged, battery-operated hand-held cable and antenna analyzer that can be remotely controlled with any Bluetooth-enabled tablet, smart phone, laptop computer, or any Kaelus iPA Series Portable PIM Analyzer. This series of analyzers operates from 690 MHz to 2700 MHz and can connect directly to the device under test, eliminating the need for a phase stable cable in most cases.
 
Download Datasheet | Product Details
 
Signal Generator
10 MHz to 20 GHz Phase Coherent Signal Generators

Signal Generator from Berkeley Nucleonics Corporation

The Model 855 Series are phase coherent multi-output signal generators that operate from 10 MHz to 6.2, 12.5 or 20.0 GHz. The generators have up to 8 independent outputs and a switching speed of under 0.02 ms. The 855 is ideally suited for a wide range of application, where good signal quality accurate and wide output power range is required. A high-stability OCXO reference provides excellent frequency accuracy and stability. The generator accepts external 10, 100 or 1000 MHz references.
 
Download Datasheet | Product Details
 
RF Transistor
10 W LDMOS Power Transistor from 3 MHz to 2700 MHz

RF Transistor from Ampleon

The BLP27M810 from Ampleon is a LDMOS Power Transistor that operates from 3 MHz to 2700 MHz. It provides a P1dB of 10 Watts, gain of more than 16 dB with an efficiency of 19%. The transistor is available in a surface mount thermally enhanced plastic package and is ideal for broadcast, RF Energy and Industrial, Scientific and Medical (ISM) applications.
 
Download Datasheet | Product Details
 
Fixed Attenuator
1500 Watt Fixed Attenuators from DC to 2.4 GHz

Fixed Attenuator from Bird Technologies

The 1500-WA from Bird Technologies are a Fixed Attenuators that operates from DC to 2.4 GHz. They can handle up to 1500 watts of power and have a VSWR of below 1.25:1. The attenuators are available in multiple attenuation configurations of 3 dB, 6 dB, 10 dB, 20 dB and 30 dB (Attenuation value can be customized). These self cooling attenuators are fully shielded against production of extraneous radiation and are available with 7/16 DIN, N-type Connectors.
 
Download Datasheet | Product Details
 
Front End Module
SkyOne Ultra 3.0 Front End Module for LTE Bands 7, 30, 40, 41

Front End Module from Skyworks

The SKY78132, SkyOne Ultra 3.0 is a multimode multiband (MMMB) Front End Module for 4G, handsets. The module meets spectral linearity requirements of LTE modulation with QPSK/16QAM up to 20 MHz bandwidth, including various resource block allocations, with excellent power added efficiency.
 
Download Datasheet | Product Details
 
Laminate
High Performance Laminate, Dielectric Matched to FR-4

Laminate from Rogers Corporation

The Kappa 438 Laminates from Rogers have been specifically formulated to have FR-4 matched dielectric constant (Dk). These laminates also exhibit low loss, tight Dk and thickness tolerances needed to meet the growing performance needs of the wireless market traditionally served by higher end FR-4 materials.
 
Download Datasheet | Product Details
 
Wireless Charging Coil
High Q, Thin and Light Wireless Charging Coils for Compact Devices

Wireless Charging Coil from MOLEX

The PowerLife Wireless Power Coils from MOLEX are developed using NuCurrent Technology. These coils provide high power transfer efficiency (Q) with an extreamly thin and small form factor making them ideal for use in smartphones, tablets and wearable devices. Wireless power antennas are currently customized products because of each customer’s unique design environment (stack up), which results in premium pricing.
 
Download Datasheet | Product Details
 
AWR Design Forum (ADF)
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.