PREV 11th, Sept 2017 NEXT

Latest News & White Papers this Week

11 Sept, 2017 - everything RF Newsletter
 
everything RF
Date: 11 Sept, 2017
 
RF Transistors
 
 
 
Industry News
United Technologies to Acquire Rockwell Collins for $30 Billion - United Technologies
SK Telecom Moves Closer to 5G with Low Latency Technology - SK Telecom
Ericsson Introduces First 5G NR Radio for Frequency Division Duplex Massive MIMO - Ericsson
Innovative RF Front End Technology to Revolutionize mmWave Networks - Movandi
T-Mobile Introduces First Ever 600 MHz LTE Smartphone - T-Mobile
QuickSmith - An Online Smith Chart Based Linear Circuit Simulation Program - QuickSmith
Keysight & ThinkRF Solution is the Optimum Platform for Spectrum Monitoring and Analysis - Keysight Technologies
Anokiwave Raises Funds to Develop Innovative mm-Wave Solutions for 5G, SATCOM and A&D - Anokiwave
Kymeta Antenna Terminals Receive Green Light from FCC for Commercial Distribution in the US - Kymeta
New Body Worn Antennas for C-Band Tactical Radio Applications - Southwest Antennas
Peregrine Semiconductor Now Holds 450 Issued and Pending Patents - Peregrine Semiconductor
More News
White Papers
Design Secrets Behind the World’s First K-band DAC - Teledyne e2V
Assessing a MIMO Channel - Rohde & Schwarz
Signal Analysis Measurement Fundamentals - Keysight Technologies
Improve Network Coverage Using Tower-Mounted Amplifiers - Kaelus
Recommendation on Base Station Antenna Standards - NGMN Alliance
More White Papers
Upcoming Events
Event Image
EuMW 2017

Date: 8 to 13 October, 2017

Location: Nuremberg, Germany

 
More Upcoming events
Featured Products this Week
RF Amplifier
10 W Solid-State Power Amplifier from 10 kHz to 1000 MHz

RF Amplifier from AR RF/Microwave Instrumentation

The 10U1000 from AR RF/Microwave Instrumentation is a portable, self-contained, air-cooled, solid-state power amplifier that operates from 10 kHz to 1000 MHz. It delivers over 10 watts of CW output power and has a gain of more than 40 dB with a noise figure of 8 dB.
 
Download Datasheet | Product Details
 
RF Switch
Ultra-Fast Antenna Tuning SP4T from 100 to 7000 MHz

RF Switch from Ethertronics

The EC614 from Ethertronics is an ultra-fast tuning SP4T for antenna tuning applications from 100 MHz to over 7 GHz. It has a switching speed of 250 ns and requires a supply voltage of 2.3 to 3.3 volts. It is available in a 2 x 2 16L QFN package. This switch has been developed for extremely fast switching with a wide bandwidth that is required for optimal WLAN antenna tuning.
 
Download Datasheet | Product Details
 
Antenna
2.4 & 5 GHz Dual Band PCB Antenna

Antenna from TE Connectivity

The 2118309-1 from TE Connectivity is a 2.4 & 5 GHz Dual Band PCB antenna that supports IEEE 802.11 a/b/g/n/ac/ad, Bluetooth, ZigBee, and Wi-Fi applications. It delivers a gain of up to 3.7 dBi and can handle an input power of 3 watts. The antenna measures 40 x 8 x 1 mm and is available with 120 mm cable with U.FL connector.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
6-bit Attenuator Die from 1 to 15 GHz

RF Variable Attenuator from OMMIC

The CGY2171XBUH/C1 is a GaAs MMIC 6-bit Attenuator that operates from 1 to 15 GHz covering the L, S, C, and X band. It has an attenuation range of 31.5 dB with a step size of 0.5 dB and an insertion loss of under 5 dB. The attenuator can handle an input power of up to 20 dBm. It is available as a die and is ideal for Radar, Telecommunication and Instrumentation applications.
 
Download Datasheet | Product Details
 
Directional Coupler
6 to 40 GHz, 20 Watts Directional Coupler

Directional Coupler from MECA

The 750-10-23.000 from MECA is a directional coupler that operate from 6 to 40 GHz. It has a coupling value of 10 dB and can handle up to 20 watts of power. The coupler has an insertion loss of less than 1.3 dB and directivity of more than 12 dB. It is available in a module with 2.40 mm female connectors and has a 36-month manufacturer warranty. The frequency range of this coupler makes it ideal for use in 5G mmWave bands.
 
Download Datasheet | Product Details
 
RF Amplifier
20 W Solid State Power Amplifier from 6 to 18 GHz

RF Amplifier from Exodus Advanced Communications

The AMP1052 from Exodus Advanced Communications is a solid state power amplifier that operates from 6 to 18 GHz. This amplifier has been developed using a class AB linear GaAs FET hybrid design and delivers a gain of more than 43 dB with an output power of 20 watts. The amplifier requires a supply voltage of 12 V DC and consumes up to 22 A of current.
 
Download Datasheet | Product Details
 
Limiter
100 W Power Limiter from 0.5 to 18 GHz

Limiter from Planar Monolithics Industries

The LM-0518-10-1W-SHS-2-F from PMI is a high power limiter that operates from 500 MHz to 18 GHz. It can handle a peak power of up to 100 Watts with a pulse width of 1usec. This limiter has an insertion loss of less 2 dB and a VSWR of 2.0:1. It is available in a module that measures 1 x 1 x 0.4 inches with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise Amplifier from 18 to 40 GHz with 40 dB of Gain

RF Amplifier from SAGE Millimeter

The SBL-1834034030-KFKF-S1 is a Low Noise Amplifier that operates from 18 to 40 GHz with 40 dB Gain and 3 dB noise figure. The amplifier requires a 8 V supply and draws 200 mA of current. The input and output port configurations are both female K connectors. Other port configurations, such as male K connectors and WR-28 waveguides are also available under different model numbers.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
Dual Chamber RF Shielded Test Enclosure from DC to 6 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-D860 is a Rack Mount Dual-Chamber RF Shielded Test Enclosure by RF Electronics that operates up to 6 GHz. It has two chambers that enable the testing of multiple DUT's simultaneously. This Test Enclosure has been developed for testing 802.11 a/b/g/n/ac, Bluetooth, RFID and Cellular products.
 
Download Datasheet | Product Details
 
RF Power Meter
True RMS Power Meter with Bus-Powered USB Connectivity

RF Power Meter from National Instruments

The USB-5681 from National Instruments is a USB true RMS power meter that operates from 10 MHz to 18 GHz. It has a dynamic range from -40 to +20 dBm and a linearity of under ±0.18 dB. The device draws only 150 mA from the USB connection, making it highly suitable for mobile applications or adding to automated test applications to free up valuable rack space.
 
Download Datasheet | Product Details
 
RF Mixer
RF SOI Image Reject Mixer from 10 to 19 GHz

RF Mixer from Peregrine Semiconductor

The UltraCMOS PE41901 is a SOI based passive double-balanced, Ku band mixer with image rejection. It integrates two mixers, a local oscillator (LO) path 90-degree coupler and RF port baluns on a single die. Integrating these functions provides good image rejection, reduces LO leakage and improves LO to RF isolation.
 
Download Datasheet | Product Details
 
Waveguide Attenuator
Programmable Waveguide Attenuators from 5 GHz to 220 GHz

Waveguide Attenuator from MI-WAVE

The 512 Series from Mi-Wave are dual programmable rotary vane attenuators that are available in frequency configurations from 5 GHz to 220 GHz. They are compatible with various waveguide sizes based on the selected frequency band. The attenuators have a range from 0 to 120 dB in 0.1 dB steps with 0.05 dB steps from 0 to 20 dB.
 
Download Datasheet | Product Details
 
Waveguide Isolator
76 to 81 GHz Isolator for Testing Automotive Circuits

Waveguide Isolator from HXI

The HMI12-387-78.5-5.0 is a ferrite based isolator that operates from 76 GHz to 81 GHz. It has been designed for the testing of automotive integrated circuits and modules. The isolator provides an isolation of 20 dB, insertion loss of 0.7 dB and can handle up to 0.75 watts of power. It has a WR-12 waveguide interface with UG-387/U Flange.
 
Download Datasheet | Product Details
 
GNSS Module
Fully-integrated, Highly-Sensitive GNSS Module

GNSS Module from OriginGPS

The ORG4033 from OriginGPS is a fully-integrated, highly-sensitive GNSS module (GPS+GLONASS/Beidou Simultaneously). The device has a rapid time to first fix (TTFF) of less than one second, accuracy of approximately one meter, and tracking sensitivity of -165 dBm.
 
Download Datasheet | Product Details
 
USB Power Sensor
50 MHz to 20 GHz Average, Peak & Pulse USB Power Sensor/Meter

USB Power Sensor from LadyBug Technologies

The LB679A is a peak and pulse power meter and sensor that operates up to 20 GHz. It measures average power, user statistical peak & pulse power, duty cycle and crest factor. The sensor has a fast measurement speed, a broad dynamic range and is shipped with LadyBug's Power Meter software application.
 
Download Datasheet | Product Details
 
RF Transistors
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.