1. everything RF
  2. RF Newsletters
more
PREV 13th Sept, 2017 NEXT

New RF & Microwave Products this Week

13 Sept, 2017 - everything RF Newsletter
 
everything RF
Date: 13 Sept, 2017
 
Sponsored by Digi-Key
 
 
 
New RF & Microwave Products this Week
Wireless Charging Solution
5 W WPC/Qi Complaint Wireless Power Receiver IC

Wireless Charging Solution from ROHM Semiconductor

The BD57011AGWL from ROHM Semiconductor is a stand-alone integrated wireless power receiver IC that can receive 5 watts of wireless power based on WPC ver. 1.2. The device has a fully synchronous rectifier circuit in low-impedance FETs, Qi compliant packet controller, Adjustable low-dropout, and open-drain output terminal to communicate the power transmitter by amplitude modulation.
 
Download Datasheet | Product Details
 
Directional Coupler
Surface Mount Directional Coupler from 0.8 to 7 GHz

Directional Coupler from BBTLine

The BBTLine Coupler1 SMT from BBTLine is a four port, surface mount Directional Coupler that operates from 0.8 to 7 GHz. It has a coupling value of 19 dB with 2 dB variation over the band. The coupler has a directivity of over 15 dB and an insertion loss of less than 0.7 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
1,000 W Pulsed Amplifier from 2.7 to 3.1 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 1000SP2z7G3z1 from AR RF/Microwave Instrumentation is a selfcontained, forced-air-cooled, broadband solid-state microwave amplifier designed for pulse applications from 2.7 to 3.1 GHz. It provides a gain of more than 60 dB with a pulsed output power of over 1000 Watts with a pulse width of 0.07 to 30 microseconds. The amplifier's Digital Control Panel (DCP) shows Forward Power and Reflected Power values plus amplifier status using a color LCD touch screen and has a single rotary knob to offer status reporting and control capability.
 
Download Datasheet | Product Details
 
Power Divider
2 Way Power Divider from 1 to 6 GHz

Power Divider from Adaura Technologies

This 2 Way Power Divider from Adaura Technologies operates from 1 to 6 GHz. It can handle up to 1 watt of input power and has an insertion loss of less than 4.3 dB. It has excellent phase and amplitude balance and a VSWR better than 1.7:1. The power divider input and output ports are matched to 50 Ohms.
 
Download Datasheet | Product Details
 
RF Switch
SP4T RF Switch from 1 MHz to 6 GHz

RF Switch from Mini Circuits

The ZSWA4-63DR+ from Mini Circuits is a SP4T absorptive, solid-state switch that operates from 1 MHz to 6 GHz. The switch provides excellent isolation, fast switching speed and high linearity. It can be used in a number of applications that require a high performance switch. The switch requires 2.3 to 3.6 V and can handle up to 33 dBm of power.
 
Download Datasheet | Product Details
 
RF Transistor
20 W LDMOS Power Transistor from 400 MHz to 2700 MHz

RF Transistor from Ampleon

The BLP9G0722-20G from Ampleon is a 28 V LDMOS power transistor that operates from 400 MHz to 2700 MHz. It provides an output power of 20 watts with high power gain and has excellent thermal stability. This device has integrated ESD protection and is complaint to Directive 2002/95/EC, regarding Restriction of Hazardous Substances (RoHS).
 
Download Datasheet | Product Details
 
Sponsored by Digi-key
IDT F297
IDT F2976 SPDT Reflective RF Switches Feature High Linearity and Wide Bandwidth
IDT's F2976 are single-pole double-throw (SP2T) reflective RF switches optimized from 5 MHz to 1.8 GHz to support downstream cable modem future migration for DOCSIS 3.1 applications, and operate at up to 10 GHz to support a multitude of wireless RF applications. Click here to learn more.
 
 
 
RF Test Set
Wireless Test Set for Evaluating 802.11ac WLAN Devices

RF Test Set from Anritsu

The MT8862A from Anritsu is an advanced one-box wireless connectivity test set to verify the performance of WLAN devices in their actual operating state. This is the first test set of its kind to support all IEEE802.11ac/n/a/g/b standards. It uses the Network Mode to measure RF performance characteristics, such as Tx power and Rx sensitivity (PER) of the target WLAN device under test (DUT).
 
Download Datasheet | Product Details
 
RF Module
802.11ac Wi-Fi + Bluetooth 5 Module

RF Module from Laird Technologies

The 60-SIPT from Laird Technologies is a certified 802.11ac 2x2 MU-MIMO Wi-Fi + Bluetooth v4.2 module (Bluetooth 5 SIG certified modules available in Q4 2017) for low power devices. The pre-calibrated module integrates the complete transmit/receive RF paths including band pass filter, diplexer, switches, reference crystal oscillator, and power manage units (PMU).
 
Download Datasheet | Product Details
 
Antenna
2.4 & 5 GHz Dual Band PCB Antenna

Antenna from TE Connectivity

The 2118309-1 from TE Connectivity is a 2.4 & 5 GHz Dual Band PCB antenna that supports IEEE 802.11 a/b/g/n/ac/ad, Bluetooth, ZigBee, and Wi-Fi applications. It delivers a gain of up to 3.7 dBi and can handle an input power of 3 watts. The antenna measures 40 x 8 x 1 mm and is available with 120 mm cable with U.FL connector.
 
Download Datasheet | Product Details
 
Termination
30 W Termination from 0.380 to 2.7 GHz with 4.1/9.5 Connector

Termination from MECA

The LPT30-MDM is a low PIM termination that operates from 0.380 to 2.7 GHz. It has a low PIM of -161 dBc, a VSWR under 1.25:1 and is matched to 50 Ohms. The termination can handle 30 watts of average power and up to 5K watts of peak power. The LPT30-MDM is ideal for IDAS / ODAS, In-Building, base station, wireless infrastructure, 4G, and AWS applications.
 
Download Datasheet | Product Details
 
Phase Locked Loop
Fractional/Integer-N Phase-Locked Loop from 250 MHz to 12.4 GHz

Phase Locked Loop from Maxim Integrated

The MAX2880 is a phase-locked loop (PLL) that operates in both integer-N and fractional-N modes. This ultra-low noise and low-spur frequency synthesizer is capable of synthesizing frequencies from 250 MHz to 12.4 GHz when combined with an external reference oscillator, loop filter, and VCO.
 
Download Datasheet | Product Details
 
RF Amplifier
100 W Solid State GaN Power Amplifier from 5.8 to 18 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2033 is a solid state GaN power amplifier that operates from 5.8 to 18 GHz. It provides a saturated output power of more than 100 watts with a gain of over 50 dB and has a return loss of above 10 dB. This rack mount amplifier has built-in protection and can widthstand harsh environments. The amplifier is available in a R5U Rack Mount Chassis with N Type Female connectors and weighs 35 kg.
 
Download Datasheet | Product Details
 
Sponsored by Digi-key
 
 
 
Antenna
Body Worn Antenna from 4.4 to 5 GHz for DoD and Law Enforcement Applications

Antenna from Southwest Antennas

The 1065-038 from Southwest Antennas is a RHCP directional patch antenna for radios operating in DoD and federal law enforcement licensed bands from 4.4 to 5 GHz. It delivers a gain of up to 4.20 dBic and can handle an input power of under 10 watts. This light weight antenna cab be easily worn and hidden in tactical clothing such as vests or MOLLE gear and is ideal for use in multi-antenna MIMO / MANET radio applications such as handheld and small form factor body worn tactical radios.
 
Download Datasheet | Product Details
 
GPS/GNSS Antenna
High Gain / High Rejection GPS Antenna

GPS/GNSS Antenna from Tallysman Wireless

The TW3150/52 is a high-gain active GPS antenna designed for timing applications in high density cell / telecommunications tower applications. The antenna provides a gain of 4.5 dBic and the LNA provides a gain of 50 dB to compensate for long cable runs often associated with installation on telecommunications towers.
 
Download Datasheet | Product Details
 
RF Amplifier
7 Watt Micro L & S-Band Solid State Power Amplifier

RF Amplifier from NuWaves Engineering

The NW-PA-12A03A from NuWaves is a Micro L- & S-Band Power Amplifier that operates from 1 GHz to 2.5 GHz. It delivers an output power of 5 Watts with a gain of 37 dB when driven with a 0 dBm (1 mW) RF input signal. This amplifier requires a supply voltage of 26 to 30 VDC and consumes less than 1.25 A of current.
 
Download Datasheet | Product Details
 
GNSS Module
GNSS Receiver Module with Integrated Antenna

GNSS Module from Taoglas

The Maverick GRS.10 from Taoglas is a GNSS receiver module with an integrated patch antenna. It consists of the u-blox NEO-M8U module with RS-232 interface. The receiver is capable of receiving GPS, GLONASS, GALILEO, and BeiDou signals. The NEO-M8U module is capable of untethered dead reckoning and is useful for areas with challenging signal conditions such as urban environments, tunnels, parking garages, etc.
 
Download Datasheet | Product Details
 
Fixed Attenuator
50 W Coaxial Fixed Attenuator from DC to 6 GHz

Fixed Attenuator from JFW Industries

The 50FHXC-XXX-50-6 is a coaxial fixed attenuator from JFW Industries that operates from DC to 6 GHz. It is available in attenuation values from 1 to 40 dB and has a VSWR of less than 1.50:1. The attenuator can handle up to 50 watts of average power and a peak power of up to 1000 watts. It is available with 4.1/9.5, 4.3/10, 7/16, N, SMA or TNC connectors.
 
Download Datasheet | Product Details
 
Waveguide Mixer
50 to 75 GHz V-Band Balanced Mixer

Waveguide Mixer from SAGE Millimeter

The SFB-15-N1A from SAGE Millimeter is a V-band balanced mixer with an RF/LO frequency from 50 to 75 GHz and an IF frequency from DC to 25 GHz. The mixer has a combined RF and LO power of 18 dBm, conversion loss of under 12 dB, an and LO/RF isolation of 30 dB. It is available as a module with a WR-15 waveguide size and UG-387/U flange.
 
Download Datasheet | Product Details
 
GNSS Module
Fully integrated GNSS SiP for Portable and Wearable Devices

GNSS Module from u-blox AG

The ZOE-M8B is an ultra-low-power GNSS System-in-Package (SiP) that supports GPS / GLONASS / BeiDou / Galileo (concurrently), including message integrity protection, anti-jamming, and anti-spoofing. It consumes 25 mW of average power over a typical 30-minute track in most environments (including urban), and as little as 12 mW during instantaneous tracking.
 
Download Datasheet | Product Details
 
RF Duplexer
770.5 / 715.5 MHz Connectorized Ceramic Duplexer

RF Duplexer from Anatech Electronics

The AM770-715D1158-C from Anatech is a Ceramic Duplexer with Band 1 from 758 to 783 MHz and Band 2 from 703 to 728 MHz. The Duplexer has an insertion loss of less than 2.5 dB and an isolation of over 45 dB. It can handle up to 5 watts of power and is available in a connectorized module that measures 65 x 40 x 20 mm with SMA female connectors.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.