Visit everything RF & Microwaves 101 at Booth #651 - IMS 2014 |  | Visit everything RF & Microwaves 101 at Booth #651 at the IMS 2014 everything RF & Microwaves 101 have a booth at the upcoming International Microwaves Symposium event in Tampa. Visit us at Booth #651 to learn about the new everything RF calculator App, waveguide section and new features on the site. Microwaves 101 also has some big news. Stop by to learn more #651. |
|
|
 New RF & Microwave Products this Week |
|
|  | Digital Attenuator from MACOM The MAAD-011021-000DIE is a DC to 40 GHz 6 Bit Digital Attenuator with an attenuation range of 31.5 dB. It has a 0.5 dB LSB and an insertion loss of under 12 dB through the band. The attenuator integrates an inverter to allow a single control for series/shunt attenuation. The inverter requires a -5 V supply (VCC) and 17 mA typical, logic is 0 V / +5 V. It is available in the form a die. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Mini Circuits The TSS-53LNB+ is a low noise bypass amplifier that operates from 500 MHz to 5 GHz. It has an integrated switch that enables the user control of the amplifier to handle both the high and low signal levels by bypassing the LNA in the presence of large signals. The amplifier is based on a E-PHEMT process that provides a low noise figure of 1.4 dB. It is available in a 3 x 3 mm MCLP package. Download Datasheet | Product Details
|
| | |
|
|  | RF Power Meter from Daisy RS The RS2026 is a portable power meter with a wireless interface between the remote power unit and the handheld display. It operates from 20 MHz to 3 GHz and has a dynamic range from 5 uW to 10 mW with an accuracy of 0.1 dB. The power meter is powered by 3 AAA batteries and has a small LCD display. Download Datasheet | Product Details
|
| | |
|
|  | Power Sensor from Agilent Technologies The E8486A is a 60 to 90 (L-Band) GHz Waveguide Power Sensor with N Type connectors. It has a dynamic range of 80 dB, allowing the sensor to measure from -60 dBm to +20 dBm instead of the standard -30 dBm to +20 dBm range. With the expanded dynamic range, the E8486 continues to be highly accurate even when measuring low-level signals, making it possible to measure power at the receiver side of point-to-point transceiver modules in addition to the modules output power. Download Datasheet | Product Details
|
| | |
|
|  | Antenna Analyzer from Anritsu The S820E is a Handheld Cable & Antenna Analyzer that is available in multiple frequency configurations - 8 GHz, 14 GHz, 20 GHz, 30 GHz and 40 GHz. The site master S829E has a 110 dB dynamic range from 20 MHz to 40 GHz, can do fast field measurements - 650 &mus/data point and supports both coaxial and waveguide measurements. Download Datasheet | Product Details
|
| | |
|
|  | RF Power Meter from Rohde & Schwarz The R&S NRP2 is a power meter with a color display that operates at frequencies up to 110 GHz. It is compatible with the R&S NRP-Zxx power sensors and all sensors dependent on measurement functions. The power range is sensor dependent and typically varies from -67 to 45 dBm. The power meter can do 1500 measurements per second in buffered mode. Download Datasheet | Product Details
|
| | |
|
|  | Power Sensor from Boonton The 55 Series are wideband USB power sensors from Boonton that operate from 50 MHz to 40 GHz (Multiple frequency configurations available). They have a power sensing range from -60 to 20 dBm. The sensors have a video bandwidth up to 70 MHz and a rise time of less than 10 us. They are available with N Type connectors. Download Datasheet | Product Details
|
| | |
|
|  | Power Sensor from LadyBug Technologies The LB480A is a 100 MHz to 10 GHz USB power sensor for pulse signals. It has a measurement range from -60 to 20 dBm with a 1.95% error. The sensor has a VSWR of 1.09:1 (27 dB return loss). The LB480A is a ruggedized sensor that is available with SMA, N Type, 3.5 mm and TNC connector options. Download Datasheet | Product Details
|
| | |
|
|  | Antenna Analyzer from COMM-connect The Model 3013 is a 30 MHz to 2.7 GHz handheld SWR/Antenna analyzer. It covers all cellular and mobile radio communication bands. The analyzer measures antenna SWR, return loss and bandwidth by sweeping target frequencies. It has N Type connectors and is matched to 50 ohms. Download Datasheet | Product Details
|
| | |
|
|
|
|  | RF Amplifier from RFHIC The HS7179-20A is a GaN hybrid power amplifier that operates from 7100 to 7900 MHz. It has been developed for radio systems and point-to-point applications. This amplifier has a gain of 10 dB, an output pulse power of 43 dBm, an efficiency of 45% and requires a 40 V Supply. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Ophir RF The 7006 is a multi-channel power amplifier that operates from 1 to 6 GHz. The amplifier provides a saturated power of 80 watts from 1 to 2.5 GHz and 50 watts from 2.5 to 6 GHz. The 7006 consumes 900 W of power when operating from 1 to 2.5 GHz and 600 W of power when operating from 2.5 to 6 GHz. It is available with N Type connectors in a rack mount configuration with internal forced air cooling. Download Datasheet | Product Details
|
| | |
|
|  | RF Switch from Planar Monolithics Industries The P2T-1G1R1G-25-R-SFF-100W is a hermetically sealed SPDT reflective switch that operates from 1 to 1.1 GHz. The switch has a low insertion loss of 0.8 dB, an isoaltion of 25 dB and can handle up to 100 Watts of average power (5KW peak power). It is available in a module with TNC Female connectors. Download Datasheet | Product Details
|
| | |
|
|  | RF Switch from Planar Monolithics Industries The P1T-200M18G-60-T-SFF OPTION 0518 is a high speed SPST absorptive switch that operates from 0.5 to 18 GHz. The switch has an insertion loss of less than 2.5 dB through the band with an isolation of over 65 dB. It has a switching speed of 25 ns and can handle up to 27 dBm of power. It is available with SMA female connectors. Download Datasheet | Product Details
|
| | |
|
