1. everything RF
  2. RF Newsletters
more
PREV 25th April, 2018 NEXT

New RF & Microwave Products this Week

25 April, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 25 April, 2018
 
Sponsored by Rohde & Schwarz
 
 
 
New RF & Microwave Products this Week
Signal Generator
51 MHz to 6.6 GHz Software Controlled RF Signal Generator

Signal Generator from Windfreak Technologies

The Windfreak SynthNV PRO is software controlled RF signal generator that operates from 51 MHz to 6.6 GHz. The device can be used for Scalar Network Analysis of both through and reflected responses of RF devices such as filters, amplifiers, antennas, cavities and matching networks. It includes an on board 8 GHz broadband RF detector / power meter. Sweeps run at 100 uS per point.
 
Product Details
 
RF Amplifier
200 W Pulsed GaN Power Amplifier from 8.2 to 9.5 GHz

RF Amplifier from Diamond Microwave

The DM-X200-04 from Diamond Microwave is a compact pulsed X-band GaN SSPA that operates from 8.2 to 9.5 GHz. It provides peak pulsed output power of more than 200 W (+53 dBm) over a 1300 MHz bandwidth, operating with pulse widths up to 100 µs and with duty cycles up to 15%. It is available in as a slimline module that measures 150 mm x 197 mm x 30 mm with N-type output connectors.
 
Download Datasheet | Product Details
 
Front End Module
26 to 30 GHz Silicon Transmit/Receive IC for Radar, SATCOM and 5G Applications

Front End Module from Anokiwave

The AWMF-0116 from Anokiwave is a Ku-Band Silicon Core IC for active steerable antenna arrays (AESA) that operates from 26 to 30 GHz. It has an integrated PA, LNA, 6-bit gain and phase control and a T/R switch. The IC provides 18 dB of transmit channel gain with an adjustable P1dB of 12 dBm and a receive channel gain of 24 dB with noise figure of 6 dB.
 
Download Datasheet | Product Details
 
RF Module
Dual-Mode Bluetooth Modules for Industrial IoT Applications

RF Module from u-blox AG

The NINA-B2 series from u-blox are dual-mode Bluetooth 4.2 stand-alone modules for industrial IoT applications. The modules have a built-in secure boot function and can operate across a wide range of temperatures. These modules are ideal for industrial automation, wireless-connected and configurable equipment, point-of-sales, and health devices applications.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
2.4 mm NMD Between Series Adapters up to 40 GHz

Between Series RF Adapter from Jyebao

The 2.4mm NMD Between Series Adapters from Jyebao operate up to 40 GHz. They are available in various configurations - 2.4 mm NMD jack to SMA plug / SMA jack / 2.92 mm plug / 2.92 mm jack / N plug / N jack / 3.5 mm plug / 3.5 mm jack. These between series adapetrs have a VSWR of up to 1.20:1. The frequency range is limited by the connector type selected.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
9 kHz to 20 GHz Multi-screen Portable RF Command Center

RF Spectrum Analyzer from Aaronia AG

The SPECTRAN V5 RF Command Center from Aaronia is a portable multi-screen RF Spectrum Analyzer that operates from 9 kHz (1 Hz) to 20 GHz. It has three large full HD widescreen monitors and a real time bandwidth of 175 MHz (extendable to 350 MHz). It can scan 20 GHz of spectrum in less than 20 milliseconds, providing an astonishing speed of 1000 GHz per second. The analyzer is ideal for interference hunting, technical surveillance countermeasures, VIP monitoring and EMC/EMI testing applications.
 
Download Datasheet | Product Details
 
Sponsored by Rohde & Schwarz
AppNote - Rohde & Schwarz
Download FREE AppNote Outphasing, Envelope & Doherty Transmitter Test & Measurement
Meeting the RF Frontend (RFFE) efficiency challenge is increasingly difficult at higher operating frequencies and bandwidths, such as those proposed for 5G. Download the AppNote and learn more about multi-channel signal synthesis with R&S®SMW200A for RFFE architectures whose signal output is constructed from two, or more, efficiently generated components. Click here to Download.
 
 
 
RF Amplifier
200 Watt High Power Amplifier from 1.9 to 6 GHz

RF Amplifier from Empower RF

The Model 2215 from Empower RF is a high power SSPA for EMC, RF Product Test, Communications, and Electronic Warfare applications. It provides an output saturated power of 200 watts and a P1dB of 100 watts with a power gain of 53 dB. The amplifier has a rugged design and is based on a patented architecture that virtually eliminates every internal connector found in the typical RF/Microwave system amplifier.
 
Download Datasheet | Product Details
 
Limiter
10 W Peak, 1 W CW Passive Limiter from 0.1 to 20 GHz

Limiter from Planar Monolithics Industries

The LM-100M20G-18-10W-SFF from PMI RF is a RF Limiter that operates from 0.1 to 20.0 GHz. It can handle 10 watts of peak power and 1 watt of CW power with a leakage of less thaan 20.5 dBm and recovery time of less than 115 ns. The limiter has an insertion loss of 2 dB and a VSWR of 2:1. It is available in a module with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Transistor
L-Band Radar GaN on SiC Transistor from 1.2 to 1.4 GHz

RF Transistor from Integra Technologies, Inc.

The IGN1214L500B from Integra Technologies is a GaN L-Band Radar Transistor that operates from 1.2 to 1.4 GHz. This GaN on SiC HEMT transistor provides an output power of over 500 watts with a pulse width of 2 ms and a duty cycle of 20%. The transistor provides a power gain of 15 dB with an efficiency of 65% while operating from a 50 V supply. It is available in a metal-based package with a sealed ceramic epoxy lid.
 
Download Datasheet | Product Details
 
RF Mixer
18 to 40 GHz RF Subharmonically Pumped Mixer

RF Mixer from SAGE Millimeter

The SFS-18340315-KFSFSF-N1-M is a subharmonically pumped mixer with an RF frequency from 18 to 40 GHz, LO frequency from 9 to 20 GHz and an IF frequency from 1 to 3 GHz. The mixer has a LO pumping power of 13 dBm, conversion loss of under 15 dB, an and LO/RF isolation of 22 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
100 Watt Solid State Power Amplifier from 6 to 12 GHz

RF Amplifier from Aethercomm

The SSPA 6.0-12.0-100 from Aethercomm is a high power GaN solid state power amplifier that operates from 6.0 to 12.0 GHz. It provides a nominal output power of over 100 watts with a small signal gain of 53-55 dB and a power added efficiency 14-16% (CW conditions). It requires a 28 V supply voltage for operation. This SSPA can be blanked on and off in less than 10 uSec.
 
Download Datasheet | Product Details
 
Bi-Directional Coupler
10 dB Bi-Directional Coupler from 10 to 600 MHz

Bi-Directional Coupler from Mini Circuits

The SYDC-10-62HP+ from Mini-Circuits is a bi-directional coupler that operates from 10 to 600 MHz. This 10 dB coupler has a directivity of over 21 dB, insertion loss of 0.5 dB and VSWR of 1.10:1. It can handle up to 20 watts of power. The coupler has core and wire construction mounted on an 8-lead printed laminate base with wraparound terminations for excellent solderability.
 
Download Datasheet | Product Details
 
Sponsored by Rohde & Schwarz
 
 
 
Waveguide Mixer
140 to 220 GHz Balanced Mixer

Waveguide Mixer from Farran Technology

The BMC-05 from Farran Technology is a balanced mixer with an RF/LO frequency from 140 to 220 GHz and IF frequency from DC to 4 GHz. It provides a LO pumping power of 13 dBm, conversion loss of 9 dB and a noise figure DSB of 10 dB. The mixer is ideal for radar, radiometry, communications and laboratory test system applications.
 
Download Datasheet | Product Details
 
Voltage Controlled Oscillator
Low Noise VCO 27 to 40 GHz

Voltage Controlled Oscillator from NI Microwave Components

The VTO-33500-40L from NI Microwave Components is a Voltage Controlled Oscillator which can be tuned to a frequency from 27 to 40 GHz. It has a tuning voltage from 4 to 22 V. This VCO provides a phase noise as low as -83 dBc/Hz at a 100 kHz offset while operating on a supply of 5.5 VDC. It delivers an output power of 18 dBm into a 50 ohm load.
 
Download Datasheet | Product Details
 
Cellular Module
LTE/WCDMA Cellular Module with Global Certifications

Cellular Module from Fibocom

The L850-GL is a multi-mode LTE CAT9 M.2 module with GNSS, supporting the global LTE markets with 21 FDD LTE bands, 4 TDD LTE bands, and penta band WCDMA, powered by the Intel® XMM™ 7360 LTE modem. This module has 35+ regulatory certifications and 10 carrier+ certifications, and with field test efforts to 70+ carriers among more than 20 countries.
 
Download Datasheet | Product Details
 
RF Mixer
10 GHz to 26 GHz GaAs Double Balanced Mixer Die

RF Mixer from Analog Devices

The HMC260A from Analog Devices is a general-purpose, GaAs double balanced mixer MMIC that can be used as an upconverter or downconverter with an RF frequency of 10 GHz to 26 GHz. This mixer provides excellent LO to RF isolation of 40 dB and LO to IF isolation of 37 dB due to optimized balun structures. The mixer operates well with LO drive levels of 13 dBm and higher. It is available as a die that measures 0.94 x 0.59 x 0.102 mm and is ideal for point-to-point radios, military end use, test equipment and sensor applications.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. Our weekly newsletters provide the latest industry news, white papers, new product releases, upcoming events, interviews and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]