PREV 30th April, 2018 NEXT

Latest News & White Papers this Week

30 April, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 30 April, 2018
 
The Largest RF & Microwave Company Directory
 
 
 
Latest News this Week
New Quantum Radar System to Detect Stealth Aircrafts - University of Waterloo
Gunshot Detection System Uses Bluetooth to Notify First Responders When Bullet-Proof Vest is Pierced - Nordic Semiconductor
Keysight & Qualcomm Achieve LTE Download Speeds of 2 Gbps - Keysight Technologies
Nokia and NTT DOCOMO Conducting 5G Trials in the 90 GHz Band - Nokia
Sequans’ Monarch LTE Chip Validated for use on SoftBank's Cat M1 in Japan - Sequans Communications
Blighter to Provide E-scan Radars for India’s Border Security Pilot - Blighter Surveillance Systems
Keysight Software Enables Creation of Realistic Modelling and Simulation Scenarios for 5G RF Systems - Keysight Technologies
Integra to Exhibit its GaN/SiC Transistors at IMS 2018 - Integra Technologies, Inc.
Keysight Opens Millimeter-Wave Research Lab at Queen’s University Belfast - Keysight Technologies
5G Technology to Boost Production of Jet Engine Components - Ericsson
Audi, Ford & Qualcomm to Demonstrate C-V2X Direct Communications Interoperability - Qualcomm
LTE & 5G Fixed Wireless Broadband Market to Generate $45.2 billion in 2022 - ABI Research
More News
New White Papers
Antenna Solution for Smartwatches - Fractus Antenna
Bluetooth Low Energy (V5.0) RF-Test for Internet of Things Applications - Rohde & Schwarz
The Connected Car Market - Amphenol RF
Noise Figure Improvements using the µHILNATM Low Noise Amplifier - NuWaves Engineering
5G Americas Spectrum Recommendations for the US - 5G Americas
More White Papers
Upcoming Event
Event Image
DAS & Small Cells Congress 2018

Date: 11 to 13 June 2018

Location: Las Vegas, Nevada

 
More Events
Trending Content
TCXO vs OCXO
TCXO vs OCXO
The oscillation frequency of a crystal changes as temperature varies. Both TCXOs (Temperature Compensated Crystal Oscillators) and OCXOs (Oven Controlled Crystal Oscillators) are crystal oscillators who oscillation frequency does not vary as much at high temperatures or when the temperature fluctuates. Click here to learn more.
 
 
 
Featured Products this Week
Wireless Charging Solution
15 Watt Wireless Charging Transmitter ICs for Automotive Application

Wireless Charging Solution from NXP Semiconductors

The MWCT1x1xA from NXP is a 15 Watt Wireless Charging Transmitter ICs for Automotive Applications. It can be used to implement and control the power transfer function, as well as monitor and manage overall system state, such as foreign object detection, temperature and system efficiency.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
100 kHz to 3 GHz RF Frequency Synthesizer Module

Frequency Synthesizer from Holzworth Instrumentation

The HSM3001A from Holzworth Instrumentation is an RF synthesizer module that operates from 100 kHz to 3 GHz. It is a microwave CW source that is architected on a non-PLL based platform. The digital-analog hybrid design provides excellent phase noise performance and spurious response, which compliments the phase coherent nature of this digital-analog hybrid signal source.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
Right Angle Between Series / In-Series Adapters up to 50 GHz

Between Series RF Adapter from Jyebao

The Right Angle Between Series / In-Series Adapters from Jyebao operate up to 50 GHz. They are available in various configurations - Mitered 1.85 mm plug / Mitered 1.85 mm jack / Mitered 2.4 mm plug / Mitered 2.4 mm jack to 2.4 mm plug / 2.4 mm jack. These adapetrs have a VSWR of up to 1.35:1. The frequency range is limited by the connector type selected.
 
Download Datasheet | Product Details
 
Power Divider
8-Way Power Dividers from 0.5 to 18 GHz

Power Divider from MegaPhase

The 8-way power divider series from Megaphase operates from 0.5 to 18 GHz. They have an insertion loss of less than 2.8 dB with an isolation of more than 15 dB. The dividers can handle up to 30 watts of CW power and have a VSWR of under 1.60:1. They are available in a module with SMA jack connectors and are designed to meet MIL-DTL-23971 specs.
 
Download Datasheet | Product Details
 
Antenna
Bluetooth, Zigbee & 802.11 b/g/n WLAN Chip Antenna

Antenna from Fractus Antennas

The FR05-S1-N-0-001 from Fractus Antennas is a chip antenna for Bluetooth, Zigbee & 802.11 b/g/n WLAN applications that operates from 2.4 to 2.5 GHz. It provides a gain of 1.3 dBi with an efficiency of 74%. This small planar monopole antenna is built on a glass epoxy substrate and is ideal for use within indoor (highly scattered) environments. The chip antenna measures 6.7 x 6.7 x 0.88 mm in size.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
4300 MHz Fixed Frequency Synthesizer SMT Module

Frequency Synthesizer from Z-COMM

The RFS4300Z-LF from Z-COMM is a Fixed Frequency Synthesizer Module that is phase locked at 4300 MHz to an external 10 MHz reference oscillator. This PLL has a phase noise of -85 dBc/Hz at 10 kHz offset, 2nd harmonic suppression of -45 dBc and spurious suppression of -65 dBc. It delivers an output power of 3 dBm and requires a supply voltage of 5 Vdc while drawing 60 mA of current.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing

RF Shielded Test Enclosure from RF Electronics

The HDRF-2570 from RF Electronics is a New Generation RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz (different models up to 60 GHz are also available). It has a thick RF absorbing foam with a typical reflection loss of 25 dB along with with a rugged design that provides isolation of 120 dB with IO panels installed.
 
Download Datasheet | Product Details
 
Wireless SoC
Bluetooth 5.0 System-on-Chip

Wireless SoC from Nordic Semiconductor

The nRF52810 from Nordic Semiconductor is a Bluetooth Low Energy System-on-Chip (SoC) that provides 2 Mbps of throughput, improved coexistence, and increased broadcast capacity. It is based on a 64 MHz, 32-bit ARM Cortex M4 MCU and consumes very low power. The SoC is available in two package variants: 6 x 6 mm QFN32 and 5 x 5 mm QFN16.
 
Download Datasheet | Product Details
 
Termination
1 Watt Thick Film Chip Termination DC to 60 GHz

Termination from Barry Industries

The TV0404 from Barry Industries is an Al2O3 chip termination that operates from DC to 60 GHz. It can handle up to 1 Watt of power and has a return loss of better than 18.5 dB. The chip is available with a standard impedance value of 50 ohms. These terminations are available in a tape & reel and waffle pack for assembly/mass production.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
4-Port USB Vector Network Analyzer from 100 kHz to 20 GHz

Vector Network Analyzer from Copper Mountain Technologies

The C4420 from Copper Mountain Technologies is a computer controlled Benchtop VNA that operates from 100 kHz to 20 GHz. It has four NMD 3.5 mm Male ports that are matched to 50 ohms. The VNA has a typical dynamic range of 145 dB (1Hz IF BW), and sweep speeds as low as 12 microseconds per point. It can be controlled with any Windows PC or laptop, this VNA is frequency extender compatible and forms the basis of the CobaltFx system.
 
Download Datasheet | Product Details
 
Tower Mount Amplifier
1800 MHz & 2100/2600 MHz Twin Tower Mount Amplifier

Tower Mount Amplifier from Amphenol Antenna Solutions

The TTA-TL100N-JJ from Amphenol Antenna Solutions is a Twin Tower Mount Amplifier that operates in 1800 MHz & 2100/2600 MHz Bands. On the Tx side i.e downlink, it provides an output power of up to 160 watts and on the Rx side i.e uplink it provides a gain of 12 dB and a noise figure of 1.3 dB. The amplifier requires a 9-30 V supply voltage.
 
Download Datasheet | Product Details
 
RF Mixer
30 MHz to 6 GHz Programmable Frequency Converter and Signal Generator

RF Mixer from Outernet

moRFeus is a programmable Fractional-N wideband frequency converter (mixer) and signal generator that operates from 30 MHz to 6 GHz. It has an LCD Display and button interface that provide a dynamic way to program the mixer LO frequency in the field with a step size of 1.5 to 3 Hz. The ability to toggle between the mixer and generator modes can easily be done using buttons on the device.
 
Download Datasheet | Product Details
 
Software
Wireless EM Propagation Software

Software from Remcom

Remcom’s Wireless InSite is site-specific radio propagation software for the analysis and design of wireless communication systems. It provides efficient and accurate predictions of propagation and communication channel characteristics in complex urban, indoor, rural and mixed path environments. Applications range from military defense to commercial communications, including wireless links, antenna coverage optimization, and jammer effectiveness.
 
Download Datasheet | Product Details
 
RF Transistor
5 Watt LDMOS Power Transistor from DC to 3500 MHz

RF Transistor from Ampleon

The BLP35M805 from Ampleon is a LDMOS power transistor that operates from DC to 3500 MHz. The transistor provides up to 5 Watts of power with a gain of 18 dB while operating on a 28 V supply. It is available in a plastic thermally enhanced package that measures 4 x 6 x 0.85 mm and is ideal for broadcast, ISM and Aerospace & Defence applications.
 
Download Datasheet | Product Details
 
Antenna Analyzer
Handheld Cable & Antenna Analyzer available in 8 GHz, 14 GHz, 20 GHz, 30 GHz and 40 GHz options

Antenna Analyzer from Anritsu

The S820E is a Handheld Cable & Antenna Analyzer that is available in multiple frequency configurations - 8 GHz, 14 GHz, 20 GHz, 30 GHz and 40 GHz. The site master S829E has a 110 dB dynamic range from 20 MHz to 40 GHz, can do fast field measurements - 650 &mus/data point and supports both coaxial and waveguide measurements.
 
Download Datasheet | Product Details
 
Waveguide Isolator
K-Band Waveguide Isolator from 24.25 to 27 GHz

Waveguide Isolator from Renaissance Electronics Corporation

The 2WR34-5 from Renaissance is a K-Band Waveguide Isolator that operates from 24.25 to 27 GHz. It has a low insertion loss of 0.15 dB, isolation of 20 dB, VSWR of 1.15:1 and can handle up to 1 watt of power. This isolator is ideal for Satcom receivers that require a low noise figure. It is available in a drop-in package.
 
Download Datasheet | Product Details
 
RF Switch
Reflective SPDT Switch for Wi-Fi, CATV, IoT and 5G Applications

RF Switch from BeRex, Inc.

The BSW7221 from BeRex is a Reflective SPDT Switch that operates from 1 MHz to 6000 MHz. It can be used in either 50 Ohm or 75 Ohm impedance terminated systems. The switch provides an isolation of 43 dB with low insertion loss of 0.49 dB at 2.45 GHz and has a fast switching time of 90 to 135 ns. It is available in a 6-lead, 1.5 x 1.5 mm UDFN package and is ideal for 802.11 Wi-Fi, DOCIS 3.1 CATV, NFC, IoT and 5G Applications.
 
Product Details
 
Featured Interview
Interview
Interview with Dean Gammell from ConductRF
everything RF Interviewed Dean Gammell, National Sales Manager, ConductRF, a manufacturer of RF interconnect solutions from DC to 110 GHz and is focused on providing a broad offering to diverse market. They have been in the RF Interconnect industry for nearly 15 years, successfully supporting high performance solutions that require precision and expertise to bring to life. Click here to read more.
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, white papers, upcoming events and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]