PREV 7th May, 2018 NEXT

Latest News & White Papers this Week

7 May, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 7 May, 2018
 
Sponsored by Rohde & Schwarz
 
 
 
Latest News this Week
Number of 5G Deployments by 2023 Expected to Exceed Initial Forecasts - 5G Americas
T-Mobile & Sprint Merger to Accelerate 5G Innovation & Deployment in US - T-Mobile US
Keysight Introduces World's First 5G NR-Ready Channel Emulation Solution - Keysight Technologies
SAGE Millimeter Introduces High Precision Direct Reading Attenuators for V, E and W Bands - SAGE Millimeter
Laser Frequency Combs Operating at Terahertz Frequencies May be the Future of Wi-Fi - SEAS
GLOBALFOUNDRIES to Deliver Real-Time 4D Imaging Radar for Autonomous Driving - GLOBALFOUNDRIES
Single LTE Cat M1 and NB-IoT Module Covers 16 LTE Bands for Global Coverage - u-blox AG
Skyworks Announced Q2 Results - Up 7% Year-over-Year - Skyworks
Phased Array Feed Technology to Broaden Vision for Radio Astronomy
Ultra-Low-Power Sigfox IoT Modules with Dual RF Connectivity - STMicroelectronics
Nuwaves Receives US Navy SBIR Phase I Contract for INTERCOM Program - NuWaves Engineering
More News
New White Papers
Navigating the GNSS Landscape for More Precise, Power-Efficient Receivers - MAXIM IC
Getting Started: An Introduction to Inductor Specifications - Coilcraft
Zero-in on the Best RF Transistor Technology for Your Radar's High Power Amplifier Designs - Integra Technologies
5G for Connected Industries and Automation - 5G-ACIA
What is Noise Figure and How to Improve it with a Low Noise Amplifier - NuWaves Engineering
More White Papers
Upcoming Event
Event Image
Space Tech Expo USA

Date: 22 to 24 May, 2018

Location: Pasadena, CA, USA

 
More Events
Sponsored by Rohde & Schwarz
Rohde & Schwarz
Doherty goes digital with T&M equipment from Rohde & Schwarz
Increase efficiency, output power and bandwidth with dual-input Doherty PA-based transmitter architecture. A digital signal split measurement provides the designer with critical design information, improving both fixed RF input-, as well as digitally-, split designs. A two channel vector signal generator such as the SMW200A from Rohde & Schwarz enables such a precision measurement. Download the paper and learn more.
 
 
 
Featured Products this Week
Tower Mount Amplifier
Twin Tower Mounted Amplifier from 1920 to 2170 MHz

Tower Mount Amplifier from Kavveri Telecom

The 119 001 45 from Kavveri Telecom is a Twin Tower Mount Amplifier that operates from 1920 to 2170 MHz. On the Rx side (uplink) it provides a gain of 12 dB with a noise figure of less than 1.7 dB. On the Tx side (downlink) it can handle an input power up to 50 dBm. It is available in an IP 68 complaint module that measures 285 x 160 x 90 mm and has an integrated Band Pass Filter, Low Noise Amplifiers and Bypass circuitry.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
Mobile Shielded Test Chamber Provides Isolation up to 87 GHz

RF Shielded Test Enclosure from Rohde & Schwarz

The R&S®ATS1000 is a mobile shielded chamber that has been developed for antenna testing. This test chamber provides a highly shielded environment (greater than 50 dB) over a very wide frequency range from 18 GHz to 87 GHz. The wide frequency range makes it ideal for testing mm-Wave and 5G applications.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
Programmable Frequency Synthesizers from 1 to 18 GHz

Frequency Synthesizer from EM Research

The THOR Series from EM Research are Programmable Frequency Synthesizers that operate from 1 to 18 GHz. The synthesizers provide an output power of up to 14 dBm and require an external reference from 5 to 200 MHz. The synthesized signal has a low phase noise with harmonics less than -25 dBc and spurious less than -60 dBc.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
6-bit MMIC Attenuator from 1 to 15 GHz

RF Variable Attenuator from OMMIC

The CGY2171XAUH from OMMIC is a 6-bit Attenuator that operates from 1 to 15 GHz. It has an attenuation range of 31.5 dB with a step size of 0.5 dB and can handle an input P1dB of up to 20 dBm. This GaAs MMIC attenuator can operate in the L, S, C, X-band and is ideal for use in Radar, Telecommunication and Instrumentation applications.
 
Download Datasheet | Product Details
 
RF Amplifier
10,000 Watt Solid State Power Amplifier from 0.5 to 1 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2131P from Exodus Advanced Communications is a rack mounted Class AB LDMOS Amplifier that operates from 0.5 to 1 GHz. This amplifier provides an output power of more than 10,000 watts and a power gain of over 70 dB. It has harmonics of -20 dBc and spurious of -60 dBc. The amplifier has built in control, monitoring and protection circuits and has been developed for use in rugged environments.
 
Download Datasheet | Product Details
 
RF Amplifier
0.5 to 6 GHz Low Noise Amplifier

RF Amplifier from AmpliTech

The APT3-00500600-1010-D4 from AmpliTech is a low noise amplifier that operates from 0.5 to 6 GHz. It provides a P1dB of 10 dBm and gain of 28 dB with a noise figure of 1 dB. The amplifier requires a supply of 15 V DC while consuming 125 mA of current. It is available in a drop-in package with SMA female connectors.
 
Download Datasheet | Product Details
 
Directional Coupler
10 dB Directional Coupler from 0.5 to 40 GHz

Directional Coupler from MegaPhase

The DC80-10K-20G from MegaPhase is a 10 dB Directional Coupler that operates from 0.5 to 40 GHz. It has an insertion loss of below 3.3 dB and directivity of over 10 dB. This coupler can handle an input power of up to 20 watts and has a VSWR of under 1.80:1. It is available in a module with 2.9 mm jack connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
100 W L/S-Band Power Amplifier from 1600 MHz to 2500 MHz

RF Amplifier from NuWaves Engineering

The NW-PA-LS-100-A01 is a solid-state power amplifier that operates from 1600 MHz to 2500 MHz. It delivers more than 100 watts of RF power with an efficiency of up to 45% and a gain of 55 dB. The PAs aluminum chassis features improved heat dissipation characteristics for higher-temperature operation. It is available in a module that measures 6.5 x 4.5 x 1.0 inches with SMA female connectors.
 
Download Datasheet | Product Details
 
Frequency Multiplier
4x Active Frequency Multiplier 17.75 to 21.50 GHz

Frequency Multiplier from SAGE Millimeter

The SFA-713863415-12SF-S1 from Sage Millimeter is an active 4x frequency multiplier that upconverts an input frequency of 17.75 to 21.50 GHz to an output frequency of 71 to 86 GHz. It provides an output power of 15 dBm with a harmonic suppression of -20 dBc. The multiplier requires a supply voltage of 8 V DC and consumes up to 500 mA of current.
 
Download Datasheet | Product Details
 
EMF Meter / Antenna
EMF Meter for Measuring Electric and Magnetic Fields in Industrial Environments

EMF Meter / Antenna from Narda Safety Test Solutions

The NIM-511 is a device with dual sensor probes for measuring electric and magnetic fields in industrial environments from 300 KHz to 100 MHz. It provides the industrial plant manager and safety professional with an accurate and inexpensive solution for proving compliance with regulations that cover exposure to RF radiation.
 
Download Datasheet | Product Details
 
RF Module
Bluetooth 4.2 Classic (BR/EDR) and Low Energy (BLE) Module

RF Module from Microchip Technology

The BM78 from Microchip is a fully-certified Bluetooth Version 4.2 module that operates from 2.402 to 2.480 GHz and provides a receive sensitivity of -92 dBm. The module has an integrated antenna with a Bluetooth stack on-board and is certified for FCC, IC, MIC, KCC, and NCC radio regulations. It supports GAP, SDP, SPP, and GATT profiles.
 
Download Datasheet | Product Details
 
RF Test Set
High-Performance RF test set for WLAN & Bluetooth Devices

RF Test Set from LitePoint

The IQxel-80 connectivity test system is a One Box Tester (OBT) that enables testing for the full range of 802.11 WLAN, Bluetooth (1.0 to 5), ZigBee, Z-Wave, WiSUN and DECT devices. It exceeds the demanding bandwidth and Error Vector Magnitude (EVM) requirements of 802.11ac equipped devices. The IQxel covers the 80 MHz version of 802.11ac.
 
Download Datasheet | Product Details
 
Down Converter
RF Down-converter for 5G Signals from 27 to 30 GHz

Down Converter from ThinkRF

The D2030 from ThinkRF is a RF Downconverter that downconverts an input RF frequency from 27 to 30 GHz to an intermediate frequency (IF) from 3.55 GHz to 5.6 GHz. It has a real time bandwidth of 160 MHz with a tuning resolution of 100 kHz. The device consumes 6 W of power while operating at +12 VDC, that allows it to be powered by an external battery, vehicle power outlet or standard power supply with plug adaptor.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
100 Hz to 50 GHz Spectrum Analyzer

RF Spectrum Analyzer from Micran

The Micran SK4M-50 Spectrum Analyzer operates from 100 Hz to 50 GHz with a resolution bandwidth from 1 Hz to 10 MHz. The analyzer has a Third-order intercept (TOI) level up to +20 dBm, a DANL < -165 dBm/Hz and a low phase noise of -125 dBc/Hz at 1 GHz signal from 100 kHz offset. It has an in-built input attenuator, a thermostatic YIG-preselector and a low-noise amplifier.
 
Download Datasheet | Product Details
 
Signal Generator
Ultra Low Phase Noise USB Signal Generator from 0.039 to 22 GHz

Signal Generator from RF-Lambda

The RSGLP0120GA is an USB controlled signal generator that operates from 0.039 to 22 GHz. It has frequency step tuning step size of 0.001 Hz across the band. This signal generator uses advanced VCO and DDS based technology along with a temperature compensated crystal reference to offer ultra-low phase noise performance. It provides an output power range of -20 dBm to 10 dBm.
 
Download Datasheet | Product Details
 
RFID Antenna
Outdoor Panel Antenna for 2.4 GHz RFID Applications

RFID Antenna from GAO RFID

The 304020 from GAO RFID is an outdoor directional antenna that operates from 2.4 to 2.5 GHz. It has been developed for the SHF RFID frequency band and can delivers up to 14 dBi of gain. It has a 30 degree horizontal and vertical bandwidth and has linear/vertical polarization. The antenna uses an N-Type female connector which makes its compatibile with a wide range of wireless equipment such as access points, routers, bridges and network adapters.
 
Download Datasheet | Product Details
 
Sponsored by Rohde & Schwarz
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, upcoming events and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]