1. everything RF
  2. RF Newsletters
more
PREV 9th May, 2018 NEXT

New RF & Microwave Products this Week

9 May, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 9 May, 2018
 
Sponsored by AR RF/Microwave Instrumentation
 
 
 
New RF & Microwave Products this Week
Band Pass Filter
Multilayer Organic Band Pass Filters from 620 to 5930 MHz

Band Pass Filter from AVX Corporation

The BP Series from AVX Corporation are Multilayer Organic Band-Pass Filters that support 18 pass bands from 620 to 5930 MHz and have an ultralow profile of less than 0.556 mm. The series exhibits a low insertion loss of below 2.41 dB, low parasitics, 50 Ohm impedance and excellent rejection of out-of-band frequencies. These filters are rated for 1W continuous RF power and are based on AVX’s patented and proven multilayer organic (MLO®) high-density interconnect technology.
 
Download Datasheet | Product Details
 
Bias Tee
1 W Bias Tee from 10 MHz to 6 GHz

Bias Tee from Lark Engineering

The BT Series from Lark Engineering are Bias Tees that operate from 10 MHz to 6 GHz. They can handle an RF power of up to 1 watt and an input current of up to 600 mA while operating over a supply of 5 - 28 V. They are available in connectorized or surface mount modules.
 
Download Datasheet | Product Details
 
Waveguide Circulator
58 to 64 GHz Waveguide Circulator

Waveguide Circulator from Micro Harmonics

The YC148 from Micro Harmonics is a WR-15 circulator that operates from 58 to 64 GHz. It has an insertion loss of less than 0.4 dB and isolation of greater than 20 dB. This circulator is ideal for point-to-point radio links, portal security systems, radio astronomy and scientific instrumentation, such as plasma diagnostics, chemical spectroscopy and biomaterial analysis.
 
Download Datasheet | Product Details
 
Phase Noise Analyzer
Real Time Phase Noise Analyzer from 10 MHz to 6 GHz

Phase Noise Analyzer from Holzworth Instrumentation

The HA7402C from Holzworth is a real time phase noise analyzer that operates from 10 MHz to 6 GHz. It is a high performance, low cost solution that has been developed to eliminate bottlenecks on manufacturing test lines. This analyzer combines traditional analog phase noise measurement front-ends (which are spur free) with cross correlation analysis.
 
Download Datasheet | Product Details
 
Power Divider
8-Way, Power Divider from 30 MHz to 6 GHz

Power Divider from Planar Monolithics Industries

The APD-8-30M6G-SFF from PMI RF is an 8-way power divider that operates from 30 MHz to 6 GHz. It provides a nominal insertion loss up to 8 dB, a reverse isolation of 36 dB, a noise figure of 6.5 dB and a VSWR of 2.0:1. The divider has an input 1 dB compression of -2.5 dBm and can handle up to 10 dBm of power.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Armored Test Cables Assemblies up to 50 GHz

RF Cable Assembly from MegaPhase

The SiteLine Series from MegaPhase are Armored Test Cables that operate up to 50 GHz. They provide maximum flexibility and are jacketed with a highly weather resistant outer cover. The cables are designed for severe environments, such as flightline, outdoor antenna testing, and on-site field testing using portable network analyzers.
 
Download Datasheet | Product Details
 
AR’s Hybrid Power Modules, Now to 100 Watts
700 MHz to 6 GHz Single Band Units
700 MHz to 6 GHz Single Band Units
Now you can have Class A designs when linearity is the driving force, as in EMC and wireless applications OR Class AB designs when increased power and efficiency is paramount for EW applications and reliability stress screening. Modular designs now provide up to 50 watts Class A and 100 watts Pout Class AB. Benchtop units can output up to 500 watts CW. Click here to learn more.
 
 
 
RF Amplifier
100 Watt Power Amplifier from 2.7 to 3.1 GHz

RF Amplifier from Elite RF

The M2.73.1G503948 from Elite RF is a power amplifier that operates from 2.7 to 3.1 GHz. It provides an output power of 100 watts and a gain of 39 dB while operating on a supply of 48 volts. The amplifier has been developed using advanced high power density LDMOS and GaN semiconductor devices that enable them to achieve high efficiency, high gain, and a wide dynamic range.
 
Download Datasheet | Product Details
 
RF Mixer
16 to 26 GHz (X, Ku, K Band) High IP3 Double Balanced Mixer

RF Mixer from Custom MMIC

The CMD255C3 from Custom MMIC is a general purpose double balanced mixer with a RF/LO frequency from 16 to 26 GHz. It has a low conversion loss of 6.5 dB, high LO to RF isolation of 40 dB, and a high input IP3 of 24 dBm across the bandwidth. The CMD255C3 can be used in both up/down converting systems and can be configured as an image reject mixer or single sideband modulator with external hybrids and power splitters.
 
Download Datasheet | Product Details
 
Power Divider
16-way Power Divider from 0.8 to 3 GHz

Power Divider from MECA

The 816-S-1.900-M01 from MECA is a 16-way power divider that operates from 0.8 to 3 GHz. This power divider can handle up to 20 watts of power, has an insertion loss of 1.5 dB and isolation over 20 dB. It is available in a module with SMA-female connectors.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
Mitered 2.92mm Plug to 3.5mm Jack Between Series Adapter up to 34.5 GHz

Between Series RF Adapter from Jyebao

The ALS-K3PC8-1.25 from Jyebao is a Mitered 2.92 mm plug to 3.5 mm jack between series right angle adapter that operates up to 34.5 GHz. It has a VSWR of up to 1.25:1 and is matched to 50 ohms. The adapter has a BeCu center contact and retainer ring and has a stainless steel body.
 
Download Datasheet | Product Details
 
RF Amplifier
27 to 33 GHz Benchtop Power Amplifier for 5G mm-Wave Applications

RF Amplifier from MI-WAVE

The 955A from Millimeter Wave Products Inc. is a benchtop power amplifier that operates from 27 to 33 GHz. This power amplifier has been specifically developed for 5G mm-Wave applications. The amplifier provides a saturated output power of 36 dBm with a small signal gain of 40 dB. It requires 100-200 V AC Power to operate. The amplifier has waveguide input and output interfaces.
 
Download Datasheet | Product Details
 
PXI RF Multiplexer
6 Channel Single/Dual/Triple Bank PXI Multiplexers up to 50 GHz

PXI RF Multiplexer from Pickering Interfaces

The 40-785B PXI Microwave Multiplexers are single or dual 6-channel panel mounted multiplexer with relays mounted on the front panel. These are SP6T Microwave Multiplexers with 1, 2 or 3 independent banks. They are available in 2.5 GHz, 18 GHz, 26.5 GHz, 40 GHz and 50 GHz frequency options with excellent insertion loss and high isolation. The remote multiplexers are supplied complete with a 1.5m interface cable.
 
Download Datasheet | Product Details
 
Sponsored by AR RF/Microwave Instrumentation
 
 
 
RF Module
WiFi, Bluetooth 5 and 802.15.4 Compliant RF Module

RF Module from Redpine Signals

The RS9116 Modules based on Redpine Signals SoCs are multi-protocol wireless connectivity solutions supporting 802.11 a/b/g/n, 802.11j, dual-mode Bluetooth 5 and 802.15.4 (also capable of running Thread or ZigBee). These modules have integrated baseband processor with calibration memory, RF transceiver, high-power amplifier, balun, T/R switch and flash memory.
 
Download Datasheet | Product Details
 
Cellular Module
Single Compact LTE Cat M1/NB1 and EGPRS Modules for Global Coverage

Cellular Module from u-blox AG

The SARA-R410M-02B module from u-blox is a compact LTE Cat M1/NB1 and EGPRS module that can be used Globally. It supports up to 16 LTE bands making it a great solution for Global coverage. The module has flexible mode selection for LTE Cat M1, LTE Cat NB1 and EGPRS. The module has regulatory certification approvals in Taiwan (NCC) and EMEA (RED) broadening the global commercial reach.
 
Download Datasheet | Product Details
 
Wireless Charging Solution
High-Efficiency Transmitter Controller for Wireless Power Systems

Wireless Charging Solution from Semtech

The Semtech TS80002 is a high-efficiency transmitter controller for wireless power systems. It supports transmission of up to 5 watts of wireless power. The TS80002 performs the necessary coding of protocol to send commands to the transmitter to adjust the power level accordingly. It can be used in a wide array of low power wireless chargers for Smart Watches, Wearables, Toys, Portable Lighting and Medical Devices.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
2-Port USB Vector Network Analyzer from 100 kHz to 9 GHz

Vector Network Analyzer from Copper Mountain Technologies

The C2209 from Copper Mountain Technologies is a 2-port modular vector network analyzer that operates from 100 kHz to 9 GHz. The VNA can measure all S parameters S11, S21, S12, S44 and can be controlled using any Windows PC or laptop. It has a dynamic range of up to 162 dB (1Hz IF BW), directivity of 46 dB and sweep speeds of as low as 10 microseconds per point.
 
Download Datasheet | Product Details
 
Antenna
Multi-GNSS Antenna for UAVs

Antenna from Hemisphere

The HA32 from Hemisphere GNSS is a multi-GNSS, multi-frequency UAV antenna that supports GPS, GLONASS, Galileo and BeiDou. It is built on a proprietary 4-helix antenna technology that provides superior filtering and anti-jamming performance with LNA features such as low noise figure of 2.0 dB and up to 30 dB gain.
 
Download Datasheet | Product Details
 
Base Station Antenna
Multi-polararized Antenna for Base Station Ham Radios and Scanners

Base Station Antenna from MP Antenna

The 08-ANT-0863 from MP Antenna is a multi-polararized antenna for base station ham radios and scanners. It operates from 25 MHz to 1300 MHz while receiving and uses the 220 & 440 MHz Bands for transmitting. This Super-M Classic antenna cab be used on the receiver and transmitter to further reduce problematic dead zones and flutter.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, white papers, products, interviews and information on upcoming events.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]