Sponsored by Aeroflex / Inmet | |
|
 New RF & Microwave Products this Week |
|
|  | RF Amplifier from Northrop Grumman The APN228 is a GaN HEMT broadband amplifier from Northrop Grumman for use in SatCom Terminals and Point to Point digital radio applications. It operates from 27 to 31 GHz with a linear gain of 19.5 dB and a Psat of 41.2 dBm. The amplifier requires a 28 V DC supply and draws a 1.2 A current. It is available as a die which is 16 sq. mm in size and is fully passivated to ensure ruggedness. Both bond pad and backside metallization are Au-based that is compatible with epoxy and eutectic die attach methods. Download Datasheet | Product Details
|
| | |
|
|  | GPS/GNSS Antenna from Ethertronics The 1002462 is part of the EtherHelix series from Ethertronics whcih are isolated magnetic dipole GPS antennas. The EtherHelix series are the worlds smallest, stand-alone, circular polarized GPS antennas. This antenna operates at 1.575 GHz, is RHCP with a 120 degree beam width and 27% efficiency. It is matched to 50 ohms and can handle up to 2 watts of power. The EtherHelix series are ideal for GPS enabled cell phones, navigation equipment, and other mobile devices. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Guerrilla RF The GRF3502 from Guerrilla RF is a broadband low noise gain block amplifier for small cell and wireless infrastructure applications. It operates from 100 to 3800 MHz and requires a supply voltage of 1.8 to 5 V while drawing up to 90 mA of current. It has a noise figure of 0.8 dB and a gain of 16.5 dB at 2 GHz. The amplifier is available in a SOT-89 package and is internally matched to 50 Ohms. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Diamond Microwave The DM-K120-01 is a Ku Band pulsed gallium nitride amplifier. It has a centre frequency of 16.6 GHz with an 800 MHz 2 dB bandwidth. The amplifier has a peak out Psat of 120 watts and a power variation with case temperature of ±1.0 dB. It has a pulse width of 100 micro seconds, rise fall time of 60 ns and a 25% duty cycle. This ultra-compact high power solid-state power amplifiers are ideal for use in demanding defence, aerospace and communications applications. Download Datasheet | Product Details
|
| | |
|
| | RF Amplifier from Diamond Microwave The DM-SC50-01 is a compact Gallium Nitride (GaN) amplifier module that operates from 2 to 6 GHz. It can be used to amplifier both pulse and CW signals, with 50 dBm peak output power (Psat) and 47 dBm. It has a gain of 30 dB and requires a supply voltage of 40-50 V for operation. This ultra-compact high power solid-state power amplifiers are ideal for use in demanding defence, aerospace and communications applications. Download Datasheet | Product Details
|
| | |
|
Sponsored by Aeroflex / Inmet | |
|
|  | Power Sensor from LadyBug Technologies These USB Power Sensors from LadyBug are available in a number of configurations from DC - 8 GHz to DC - 40 GHz. They can perform high accuracy average power measurements and are used for General purpose, ATE systems, Calibration applications, manufacturing test, lab and field, unattended applications. All sensors use the LadyBug no-zero and no-cal patented technology which eliminates the need to switch the signal out to zero or calibrate the sensor or to wait for internal circuitry – All you need to do is connect and measure. Download Datasheet | Product Details
|
| | |
|
|  | In Series Coaxial Adapter from RF Industries The RFD-4195-1952 is a low PIM 4.1-9.5 (Mini) DIN Male to 4.1-9.5 Mini DIN Female right angle adapter. The 4.1/9.5 (Mini) DIN is essentially a compact version of the 7-16 DIN with similar electrical performance. Applications include wireless infrastructure sites, indoor/outdoor DAS (Distributed Antenna Systems) requiring low PIM (Passive Intermodulation) performance. The adapter features a radius internal design that provides constant 50 ohm impedance for optimum electrical performance to 7.5 GHz. Download Datasheet | Product Details
|
| | |
|
|  | In Series Coaxial Adapter from RF Industries The RFD-4195-1950 is a low PIM 4.1-9.5 (Mini) DIN Male to 4.1-9.5 Mini DIN Female adapter. The 4.1/9.5 (Mini) DIN is essentially a compact version of the 7-16 DIN with similar electrical performance. Applications include wireless infrastructure sites, indoor/outdoor DAS (Distributed Antenna Systems) requiring low PIM (Passive Intermodulation) performance. The adapter has an impedance of 50 Ohms and can operate up to 7.5 GHz. It is manufactured with a brass body in a durable non-tarnish tri-metal (white bronze) plating with a PIM rating of less than or equal to -160dBc using 2 tones at 20 watts. Download Datasheet | Product Details
|
| | |
|
|  | Signal Generator from Rohde & Schwarz The R&S®SGS100A is an RF source designed to meet the requirements of automated test systems. It is available as a CW source or as a vector signal generator with an integrated I/Q modulator. With its frequency range of up to 12.75 GHz, the vector signal generation version covers the essential digital signals. The CW version can be used as a flexible local oscillator as well as for interference testing against mobile radio standards. Download Datasheet | Product Details
|
| | |
|
|  | Up Converter from Rohde & Schwarz The SGU100A is a modular frequency upconverter that extends the R&S®SGS100A signal generators (Product Above) range from 12 GHz to 20 GHz. The R&S SGS100A and R&S SGU100A act as a single unit with one I/Q input and one RF output. This combined unit can also be controlled remotely or manually just like a single instrument. Depending on the configuration, it takes up two height units at ½ 19" width or one height unit at 19" width. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Hittite The KHPA-0811W is an X-Band High Power Pulsed Amplifier available in 500 W, 1000 W and 2000 W configurations. It operates from 8 to 11 GHz, requires a 48 V DC supply and has a 22.5% efficiency. The amplifier has a pulse width from 0.05 to 100 usec, duty cycle of 20% and a rise fall time of 200 ns. It has an out of band spurious of -70 dBc and a 2nd Harmonic of -40 dBc. The KHPA-0811W is available in a compact Al or Cu chassis with SMA Female (Input) and N Type (Output) connectors. It can operate at temperatures from -20 to 70 Degrees C. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Hittite The KHPA-0618WR is a high power rack mounted microwave amplifier that operates from 6 to 18 GHz. It provides an output of 100 watts with a gain of 60 dB and a noise figure of 5 dB. The amplifier is matched to 50 Ohms and is ideal for commercial radar, military radar, electronic warfare and test & measurement applications. TTL local/remote switching is provided as an option. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Mini Circuits The AVM-273HP+ is a three stage balanced wideband amplifier that operates from 13 to 26.5 GHz. It delivers up to 0.5 Watts of power and has an excellent isolation which enables the amplifier to be used as a wideband isolation amplifier or buffer amplifier. The AVM-273HP+ is ideal for use in a number of microwave systems including point to point, military EW, Radar, DBS and VSAT. The amplifier is unconditionally stable, matched to 50 ohms and available in a compact surface mount package. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Skyworks The SKY67153-396LF is a 0.7 to 3.8 GHz low noise amplifier for wireless communication, L band, s band receivers, Cellular repeaters and high temperature applications. It has a noise figure less than 0.7 dB through the band with an IP3 greater than 34 dBm. The amplifier has a flexible bias voltage from 3 to 5 V and consumes between 30 and 100 mA of current. It is available in a compact 2 x 2 mm 8 pin dual flat no lead package. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from MACOM The MAAL-011111 is a 22 to 28 GHz Low Noise Amplifier with a gain of 19 dB and noise figure of 2.5 dB. This compact surface mount amplifier (3 mm 16 lead PQFN package) requires a 3.3 V supply and is ideal for use in receiver applications which require broadband performance with simple bias requirements. The amplifier is RoHS compliant and 260°C Reflow Compatible. Download Datasheet | Product Details
|
| | |
|
|  | Vector Network Analyzer from Anritsu The MS46322A is a series of Economy ShockLine™ Vector Network Analyzers with a frequency range from 1 MHz to 4/8/14/20/30/40 GHz. They are 2-port VNAs packaged in a compact and rugged 2U chassis. The entire series has 220 microseconds per point sweep speed, and better than 100 dB dynamic range to 40 GHz, making it suitable for testing passive devices in engineering, manufacturing and cost-sensitive education applications. Download Datasheet | Product Details
|
| | |
|
|  | Band Pass Filter from Triquint The 885070 is a 2437 MHz BAW Filter for WLAN Access Points and small cell applications. It has a 69 MHz bandwidth and enables the coexistence of 4G (LTE/TD-LTE) & Wifi signals. It can also be used for ISM band applications and mobile hotspots. The filter has a high rejection and is available in a compact 1.70 x 1.30 x 0.46 mm ceramic package that is hermetically sealed. The filter can handle up to 1 Watt of power. Download Datasheet | Product Details
|
| | |
|
|  | RF Switch from Triquint he TQC0015 is a high isolation absorptive SPDT switch that operates from 100 MHz to 6 GHz. The switch requires a DC supply voltage from 3 to 5 V and has a 1.8 V CMOS logic. It has a low insertion loss of under 0.9 dB and an IP3 of 56 dBm. The output ports are matched to 50 ohms and the switch is available in a 4 x 4 mm QFN package. It is ideal for WLAN, Cellular Infrastructure, Test & Measurement, Smart Energy and UHF/VHF applications. Download Datasheet | Product Details
|
| | |
|
|  | RF Switch from MACOM The MASW-011052 is a HMIC Silicon PIN Diode SPDT Switch with Integrated Bias Network that operates from 2 to 18 GHz. It has a low insertion loss and high isolation. The switch has a switching speed of 50 ns and can handle up to 44.6 dBm of power (IP3). Large bond pads facilitate the use of low facilitate the use of low inductance ribbon bonds, while gold backside metallization allows for manual or automatic chip bonding. The switch is available as a Die in gel pack or in waffle pack. Download Datasheet | Product Details
|
| | |
|
| | RF Switch from MACOM The MASW-011053 is a HMIC Silicon PIN Diode SP3T Switch with Integrated Bias Network that operates from 2 to 18 GHz. It has a low insertion loss and high isolation. The switch has a switching speed of 50 ns and can handle up to 50 dBm of power (IP3). Large bond pads facilitate the use of low facilitate the use of low inductance ribbon bonds, while gold backside metallization allows for manual or automatic chip bonding. The switch is available as a Die in gel pack or in waffle pack. Download Datasheet | Product Details
|
| | |
|
