PREV 15th Aug, 2018 NEXT

New RF & Microwave Products this Week

15 Aug, 2018 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 15 Aug, 2018
 
Sponsored by Digi-Key
 
 
 
New RF & Microwave Products this Week
RF Spectrum Analyzer
DC to 6 GHz Real-time Spectrum Analyzer

RF Spectrum Analyzer from RIGOL Technologies

The RSA5000 from RIGOL is a Real Time Spectrum Analyzer. It is available in two frequency configurations 9 kHz to 3.2 GHz and 9 kHz to 6.5 GHz. The analyzer has a Real-Time Analysis Bandwidth of 25 MHz with 1 Hz Resolution Bandwidth and 7 Real-Time visualization modes. It has a 10.1” Capacitive touchscreen display with an intutive control interface.
 
Download Datasheet | Product Details
 
RF Test Set
Radio Test Set from 100 kHz to 3 GHz

RF Test Set from Rohde & Schwarz

The R&S CMA180 is a radio test set from Rohde & Schwarz that operates from 100 kHz to 3 GHz with a bandwidth of 20 MHz. The test set is equipped with a high-performance RF generator, RF analyzer, AF generator and AF analyzer and features advanced interfaces. It can handle up to 150 W of peak input power and up to 100 W of continuous input power.
 
Download Datasheet | Product Details
 
Power Divider
4 Way Wilkinson Power Divider from 0.5 to 32 GHz

Power Divider from Marki Microwave

The PD4-0R532 from Marki Microwave is a 4-Way Wilkinson Power Divider that operates from 0.5 to 32 GHz. This power divider can handle up to 1 watt of power, has a low insertion loss, high isolation, and excellent phase/amplitude balance. It is available in a module with 2.92 mm connectors (other connector options are available on request).
 
Download Datasheet | Product Details
 
Digital Phase Shifter
6 to 19 GHz Digital Phase Shifter

Digital Phase Shifter from RF-Lambda

The RFPSHT0618N6 from RF-Lambda is a 6-Bit Digital Phase Shifter that operates from 6 to 19 GHz. This phase shifter offers a total phase shift range of 360° and has a low insertion loss of under 12 dB. It can handle an input power of up to 30 dBm and has a VSWR of under 3.0:1. The RFPSHT0618N6 is available in a hermetically sealed package with 2.92 mm female connectors.
 
Download Datasheet | Product Details
 
GNSS Module
Quad-Band GNSS Module for IoT Applications

GNSS Module from Quectel

The MC90 from Quectel is a quad-band GSM/GPRS/GNSS/Wi-Fi module that supports hybrid positioning technologies including GNSS, Cell ID and Wi-Fi aided positioning. This module is based on MTK’s MT2503 platform and supports dual SIM single standby function. It integrates a multi-GNSS system, including GPS, GLONASS, Galileo and QZSS.
 
Download Datasheet | Product Details
 
RF Module
868 MHz Long Range (LoRa) Radio Module

RF Module from Wurth Elektronik

The AMB8826 from Wurth Elektronik is an 868 MHz Long Range (LoRa) Radio Module that supports three operating modes - Long Range mode, Flooding Mesh-Net, as well as a ready-to-go configuration. The module is based on the TI CC1310 System on Chip with a sub-GHz transceiver and has a 32-bit ARM Cortex-M3 CPU, 64 kB flash memory and an integrated PCB antenna.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
STEVAL-SMARTAG1 NFC Sensor Tag Evaluation Board
STMicroelectronics STEVAL-SMARTAG1 NFC Sensor Tag Evaluation Board and Software Library
STMicroelectronics' NFC tracker evaluation board includes a comprehensive software library and sample application to monitor and log sensor data from Android or iOS devices. The ultra-low-power sensor node board mounts an ST25DV NFC tag, STM32L0 Arm Cortex-M0+, and environment and motion sensors. Click here to learn more.
 
 
 
Front End Module
Dual-Band 802.11ac Front-End Module

Front End Module from Skyworks Solutions

The SKY85812-11 is a highly integrated, WiFi Dual-Band 802.11ac front-end module (FEM). It has integrated 5 GHz single-pole, double-throw (SPDT) transmit/receive (T/R) switch, low-noise amplifier (LNA) with bypass, and 2.4 GHz SP3T switch with Bluetooth port and LNA with bypass. The SKY85812-11 also has a 2 GHz LTE coexistence filter and diplexer.
 
Download Datasheet | Product Details
 
RF Transistor
125 W RF Power GaN Transistor from 30 to 2200 MHz

RF Transistor from NXP Semiconductors

The MMRF5017HS from NXP is a RF Power GaN Transistor that operates from 30 to 2200 MHz. It provides an output power of 125 W with an efficiency of 59.1% while operating over a 50 V supply. The transistor is available in a surface mount NI-400S-2S package and is ideal for radar, jammers, EMC testing, mobile radios and wireless cellular infrastructure applications.
 
Download Datasheet | Product Details
 
RF Switch
Reflective, SP6T PIN Diode Switch from 0.5 to 18 GHz

RF Switch from L3 Narda-MITEQ

The SS162DHTS from L3 Narda-MITEQ is a Reflective, SP6T PIN Diode Switch that operates from 0.5 to 18 GHz. It has an insertion loss of less than 3.6 dB with an isolation of over 60 dB and a switching speed of under 20 ns. The switch can handle an input power of up to 200 mW. This gold plated switch has removable SMA connectors for use in drop-in applications and is ideal for EW systems, automatic test equipment and simulators.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
USB Controlled Digital Attenuator from 10 MHz to 6 GHz

RF Variable Attenuator from DS Instruments

The DAT64 from DS Instruments is a digital programmable RF attenuator that operates from 10 MHz to 6 GHz. This USB-controlled step attenuator has an attenuation range of 0 to 63 dB with 0.5 dB steps. The attenuator has a low insertion loss and can handle an input power of up to 25 dBm. It is available in a compact benchtop module that measures 2.75 x 1.25 x 2.15 inches with SMA connectors.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
0.1 to 18 GHz Single Channel Benchtop Programmable Attenuator Assembly

RF Variable Attenuator from JFW Industries

The 50BA-030-31 from JFW Industries is a compact benchtop programmable attenuator assembly that operates from 100 MHz to 18 GHz. It has one solid-state attenuator with an attenuation range of 0 to 31 dB with 1 dB steps. The assembly can handle an input power of up to 25 dBm and has a switching speed of 1 microsecond.
 
Download Datasheet | Product Details
 
RF Detector
6 to 18 GHz Temperature Compensated Directional Power Detector

RF Detector from MACOM

The MACP-010572 is a Temperature Compensated Directional Power Detector that operates from 6 to 18 GHz. It can detect a minimum power of -16 dBm. This detector requires a small amount of bias for proper performance. The total bias current is less than 0.5 mA. The MACP-010572 is fabricated on a well established GaAs process featuring full passivation for performance and reliability.
 
Download Datasheet | Product Details
 
Sponsored by Digi-Key
 
 
 
Microwave Backhaul Radio Links
70 GHz E-Band Backhaul Radio with 1 Gbps Throughput

Microwave Backhaul Radio Links from Siklu

The EH-710TX from Siklu is a 70 GHz E-Band Backhaul Radio that provides interference-free gigabit Ethernet connectivity on the street and on rooftops for smart-city applications, Wi-Fi hotspots, security cameras, residential and business broadband. It delivers a throughput of up to 1000 Mbps.
 
Download Datasheet | Product Details
 
RF Amplifier
200 W Solid State Power Amplifier from 8 to 18 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2065-1 is a solid state GaN power amplifier from Exodus Advanced Communications that operates from 8 to 18 GHz. It provides a saturated output power of 200 watts with a gain of over 53 dB. The amplifier has a wide instantaneous bandwidth and is suitable for all single channel modulation standards. It is available in a 7U rack mount chassis with N-type female connectors and is ideal for EMI/RFI, lab, and general communication applications.
 
Download Datasheet | Product Details
 
RF Amplifier
40 W, 6 to 18 GHz Solid State Amplifier

RF Amplifier from AR RF/Microwave Instrumentation

The Model 40S6G18-L from AR RF/Microwave Instrumentation is a portable, self contained, liquid-cooled, solid-state amplifier that operates from 6 to 18 GHz. This class A amplifier provides an output power of 40 watts with a power gain of 46 dB. It is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier.
 
Download Datasheet | Product Details
 
RF Amplifier
10 W GaN Power Amplifier from 0.01 to 2.8 GHz

RF Amplifier from Analog Devices

The HMC8500PM5E is a GaN Power Amplifier that operates from 0.01 to 2.8 GHz. It provides 10 Watts (40 dBm) of power with a gain of 15 dB and 55% power added efficiency (PAE). The HMC8500PM5E is available in a 5 x 5 mm compact LFCSP package and is ideal for pulsed or continuous wave (CW) applications, such as wireless infrastructure, radars, public mobile radios, and general-purpose amplification.
 
Download Datasheet | Product Details
 
Antenna
51 dBi, Cassegrain Antenna from 43 to 50 GHz

Antenna from SAGE Millimeter

The SAY-4335035104-188-S1 is a Cassegrain antenna that operates from 43 to 50 GHz in the U-Band. It delivers a gain of up to 51 dBi and a half power beamwidth of 0.4 degrees across the band. This antenna has a 48-inch fiberglass main reflector and a corrugated horn, that is covered with an all-weather radome.
 
Download Datasheet | Product Details
 
OCXO
G-Compensated OCXOs from 5 to 130 MHz

OCXO from Bliley Technologies

The Poseidon Series are G-compensated OCXOs from Bliley Technologies that operate from 5 to 130 MHz. They have been specifically designed for high vibration environments where dynamic phase noise performance is of extreme importance. The active compensation and passive isolation provide up to 100x improvement in acceleration sensitivity over standard oscillators.
 
Download Datasheet | Product Details
 
RF Amplifier
50 kHz to 40 GHz Wideband Amplifier

RF Amplifier from Mini Circuits

The ZVA-403GX+ is a coaxial, ultra-wideband amplifier that operates from 50 kHz to 40 GHz. It provides a gain of 12 dB with a gain flatness of 1.5 dB and a noise figure of 6 dB. This model operates on a single 5V supply while consuming less than 100 mA of current, and is capable of delivering up to 20 mW output power at 1 dB compression.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest industry news, information on new product releases, white papers, upcoming events and a host of technical articles.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]