PREV 20th Aug, 2018 NEXT

Latest News & White Papers this Week

20 Aug, 2018 - everything RF Newsletter

RF & Microwave industry updates

 
everything RF
Date: 20 Aug, 2018
 
Sponsored by EDI CON USA
 
 
 
Latest News this Week
World’s First Monolithic, SOI Wi-Fi Front-end Module for 2.4 GHz Applications - pSemi
Boeing Develops Innovative Patch Antenna for UAVs - Boeing
World’s First Multi-Band, Multi-Satellite Electronically Steered Antenna Array System - ATLAS Space Operations
Quantenna Demonstrates 1 Gbps Throughput Using its Wi-Fi Access Point - Quantenna
NASA Explores the Use of GaN Crystals for Space Applications - NASA
Ericsson Planning on Increasing Investment in the US 5G Market to Accelerate Deployment - Ericsson
Samsung Launches First 5G Modem Fully Compliant with 3GPP Standards - Samsung Electronics
Latest Version (v14) of NI AWR Design Environment Software is Out Now - National Instruments
Wi-Fi Technology Can Now Check Your Bags for Suspicious Materials - Rutgers University
PowerSphyr and GaN Systems to Develop GaN-Based Wireless Power Systems for High Power Applications - GaN Systems
GNSS Receiver with Post Processing to Provide Accurate, Affordable Geo-Location for Drones - Rokubun
More News
New White Papers
Technical Reference Manual for RF Interconnects - MegaPhase
Overcoming Challenges of On-Wafer Load Pull Measurements for 5G Applications - Maury Microwave
Antenna Redundancy for SATCOM Applications - DEV Systemtechnik
24/7 RF - Reference Book for High Performance Products - Ampleon
Addressing Phase Noise Challenges in Radar and Communication Systems - Custom MMIC
More White Papers
Upcoming Event
Event Image
Mobile World Congress Americas 2018

Date: 12 to 14 September 2018

Location: Los Angeles, California

 
More Events
Sponsored by EDI CON USA
EDI CON
Registration Now Open! Register Now for Best Rates!
The Electronic Design Innovation Conference is an industry event that brings together RF, microwave, EMC/EMI, and high-speed digital design engineers and system integrators for networking, product demonstrations, training, and learning opportunities. Use code READMWJ20 to save 20% off Early Bird rates today! Click here to learn more.
 
 
 
Featured Products this Week
RF Amplifier
Solid State GaN Power Amplifier from 2 to 7 GHz

RF Amplifier from Exodus Advanced Communications

The AMP1150 from Exodus Advanced Communications is a solid state high power amplifier that operates from 2 to 7 GHz covering the C & S-Band. The Class AB GaN amplifier delivers an output power of more than 70 Watts with a gain of over 48 dB. It requires a supply voltage of 32 VDC and consumes up to 12 A of current.
 
Download Datasheet | Product Details
 
RF Amplifier
1 to 13 GHz Low Noise Amplifier for Military and Industrial Applications

RF Amplifier from Planar Monolithics Industries

The PE2-35-1G13G-2R5-10-12-SFF from PMI is a Low Noise Amplifier that operates from 1 to 13 GHz. It provides a gain of more than 35 dB with a noise figure of under 1.5 dB and a P1dB of 12 dBm. The amplifier is available in a module that measures 1.08 x 0.71 x 0.29 inches with removable SMA female connectors.
 
Download Datasheet | Product Details
 
RF Cable Assembly
50 GHz Rugged Test Cables for Bench Testing

RF Cable Assembly from MegaPhase

The RF Orange Test Cables from MegaPhase have been developed for standard bench testing. These cables can operate at frequencies up to 50 GHz with excellent phase and amplitude performance. These rugged test cables can be used in the lab, production environment or in ATE systems.
 
Download Datasheet | Product Details
 
RF Cable Assembly
N plug to N jack Super flexible Cable Assembly up to 18 GHz

RF Cable Assembly from Jyebao

The N30N80-63-18GXXX from Jyebao is an N plug to N jack super flexible cable assembly that operates up to 18 GHz. This test cable is available in different lengths and has a return loss of 18 dB. It can operate over a wide temperature range from -40 to 85 C.
 
Download Datasheet | Product Details
 
RF Switch
0.7 To 3.8 GHz SP4T High-Power Switch

RF Switch from Skyworks Solutions

The SKY13597-684LF from Skyworks is a SP4T RF Switch that operates from 0.7 to 3.8 GHz. It can handle up to 40 dBm of power, has a low insertion loss and high isolation of 23 dB at 2.7 GHz. Switching is controlled by two CMOS/TTL compatible control voltage inputs (VC1 and VC2). The SKY13597-684LF is available in a small size, 10-pin, 1.1 x 1.5 x 0.5 mm QFN package and is ideal for cellular systems, 2G/3G/4G LTE systems, pre-PA and post-PA switching applications.
 
Download Datasheet | Product Details
 
Band Pass Filter
Low Cost Custom RF Filter from 300 MHz to 2.4 GHz

Band Pass Filter from NuWaves Engineering

The µFILTER from NuWaves is a low-cost miniature RF filter designed to allow the end user the capability to select a custom filter (Bandpass, Highpass, Low-Pass, or Band-Reject). The custom band-pass filter can be fine tuned to have any frequency requirement from 300 MHz to 2.4 GHz with 3 dB bandwidth from 1% to 40%.
 
Download Datasheet | Product Details
 
Switched Filter Bank
Five Channel Switched Filter Bank for C-Band Applications

Switched Filter Bank from TRAK Microwave Limited

The SWF002 from TRAK Microwave Limited is a 5 Channel Switched Filter Bank assembly that operates in the C band from 4 to 8 GHz. The module has a 500 MHz pass band with an insertion loss of under 10 dB, stop band rejection of 60 dB and a switching speed of up to 100 nsec. It is available in a module that measures 2.29 x 1.40 x 0.265 inches and is ideal for military and airborne applications.
 
Download Datasheet | Product Details
 
RF Mixer
X/Ku/K Band GaAs MMIC Triple Balanced Mixer

RF Mixer from Marki Microwave

The MM2-0530HSM from Marki is a passive GaAs MMIC triple-balanced mixer which has an LO/RF frequency from 5 to 30 GHz and IF frequency from 2 to 20 GHz. It provides a P1dB of 15 dBm and port-to-port isolation of 35 dB. The mixer's wide frequency band covers X/Ku/K bands and has excellent spurious suppression and unit-to-unit repeatability.
 
Download Datasheet | Product Details
 
RF Amplifier
50 W Hybrid Power Amplifier Module from 0.7 to 6 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 50HM1G6-47 from AR RF/Microwave Instrumentation is a compact, wideband, hybrid power amplifier module that operates from 0.7 to 6 GHz. It provides a small signal gain of 55 dB with excellent gain flatness, noise figure of 8.5 dB and low intermodulation distortion. When used with a sweep generator, it provides an RF power of more than 50 Watts while operating from a single DC supply voltage of 28V.
 
Download Datasheet | Product Details
 
RF Amplifier
50 W GaN Based Rack Mount Amplifier from 8 to 12 GHz

RF Amplifier from KeyLink Microwave

The KB80120S47A from Keylink Microwave is a rack-mountable amplifier that operates from 8 to 12 GHz. This GaN based amplifier subsystem provides excellent power density, high efficiency, low distortion and wide dynamic range. It provides an output power of 50 watts with a gain of 47 dB. The gain of the amplifier can be controlled from the front panel of the device.
 
Download Datasheet | Product Details
 
Digital Phase Shifter
12-Bit RF Digital Phase Shifter from 4 to 8 GHz

Digital Phase Shifter from Telemakus

TEP8000-6 is a laboratory quality RF Digital Phase Shifter that operates from 4 to 8 GHz. The device has a phase range of 360° with an insertion loss of 5 dB. This 12-bit phase shifter has a 0.25 dB resolution and can handle up to 20 dBm of power. It can be controlled and powered via a USB interface using any Windows XP or 7 PC using a easy to use GUI.
 
Download Datasheet | Product Details
 
RF Power Meter
EMC & RF Power Meters from 9 kHz to 18 GHz

RF Power Meter from DARE!! Instruments

The RadiPower® are RF power meters designed for CW power measurements during EMC testing. This series of power heads can measure RF power from 9 kHz to 18 GHz (two options available - 9 kHz to 6 GHz and 80 MHz to 18 GHz). These power meters can measure CW power with a power range from -55 dBm to 10 dBm and an accuracy of 0.2 dB.
 
Download Datasheet | Product Details
 
PIM Analyzer
Portable PIM Analyzers with Multiple Test Modes

PIM Analyzer from AWT Global

The PIM S1P Series from AWT Global are a range of portable PIM analyzers for telecommunication infrastructure. They are available in various frequency configurations covering GSM, LTE, PCS and many bands from 690 MHz to 2700 MHz. These are ruggedized analyzers are built to work under tough conditions and will perform reliably to provide constant CW Power in full conformance to PIM standard IEC 62037.
 
Download Datasheet | Product Details
 
Power Sensor
Portable USB Power Sensor from 50 MHz to 26.5 GHz

Power Sensor from Micran

The PLS26 from Micran is a portable USB Power Sensor that operates from 50 MHz to 26.5 GHz. It has a dynamic range of 70 dB and a power range from 10 nW to 100 mW (-50 to 20 dBm). The power sensor has a measurement speed of up to 25 readings/s and a settling time of less than 5 sec.
 
Download Datasheet | Product Details
 
Cellular Module
LTE/WCDMA Cellular Module with Global Certifications

Cellular Module from Fibocom

The L850-GL is a multi-mode LTE CAT9 M.2 module with GNSS, supporting the global LTE markets with 21 FDD LTE bands, 4 TDD LTE bands, and penta band WCDMA, powered by the Intel® XMM™ 7360 LTE modem. This module has 35+ regulatory certifications and 10 carrier+ certifications, and with field test efforts to 70+ carriers among more than 20 countries.
 
Download Datasheet | Product Details
 
Sponsored by EDI CON USA
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, new white papers and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]