PREV 22nd Aug, 2018 NEXT

New RF & Microwave Products this Week

22 Aug, 2018 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 22 Aug, 2018
 
Sponsored by Pasternack
 
 
 
New RF & Microwave Products this Week
Front End Module
2.4 GHz Silicon-On-Insulator Wi-Fi Front-end Module

Front End Module from pSemi

The PE561221 from pSemi is a 2.4 GHz SOI Wi-Fi front-end module that is based on pSemi's UltraCMOS technology. This is the first FEM to be made on a Silicon on Insulator process. It integrates a low-noise amplifier (LNA), a power amplifier (PA) and two RF switches (SP4T, SP3T) on a single die.
 
Download Datasheet | Product Details
 
Signal Generator
RF Signal Generator from 100 kHz to 40 GHz

Signal Generator from Berkeley Nucleonics Corporation

The 865 Series of RF / Microwave Signal Generators from Berkeley Nucleonics operate from 100 kHz up to 40 GHz with 0.001 Hz resolution. They provide excellent signal purity with an ultra-low phase noise of -145 dBc/Hz at 20 kHz offset and low spurious. These devices have a dynamic range of -90 to 27 dBm and a switching time down to 10 µs.
 
Download Datasheet | Product Details
 
Signal Generator
8 kHz to 1 GHz, 3 GHz or 6 GHz RF Signal Generator

Signal Generator from Rohde & Schwarz

The R&S SMB100B is a compact analog signal generator available in various frequency options from 8 kHz to 1 GHz, 3 GHz or 6 GHz. The generator can deliver up to 34 dBm of output power (at 1 GHz carrier frequency) without an external amplifier. It provides an outstanding single sideband (SSB) phase noise of < -134 dBc (meas.) at 1 GHz and an offset of 20 kHz.
 
Download Datasheet | Product Details
 
RF Amplifier
1 to 2.5 GHz L- & S-Band Bi-directional Amplifier

RF Amplifier from NuWaves Engineering

The NW-BA-12C04A from NuWaves Engineering is a bi-directional amplifier that operates from 1 to 2.5 GHz. This L-Band/S-Band Bidirectional amplifier provides 15 watts of output power at the Tx port. This compact and light weight bi-directional amplifier is ideal for extending the communication range of half duplex L or S-band transceivers with constant-envelope waveforms or near-constant-envelope waveforms.
 
Download Datasheet | Product Details
 
RF Amplifier
500 W Ka Band Outdoor High Power Amplifier

RF Amplifier from Polarity

The POL500Ka is a Ka band high power amplifier that operates from 32 to 36 GHz. It delivers an output power of 500 watts with a gain of 70 dB. This amplifier is specifically designed to meet multicarrier operation in demanding outdoor satellite communication applications for antenna mount operation. It is available in a module that measures 10.25 x 9.5 x 22 inches with WR-28 waveguide interface.
 
Download Datasheet | Product Details
 
RF Amplifier
Power Amplifier Module from 2 to 4 GHz

RF Amplifier from ERZIA

The ERZ-HPA-0200-0400-24 from ERZIA is a Power Amplifier that operates from 2 to 4 GHz. It provides an output power of up to 25 dBm with a small signal gain of 22 dB. The amplifier requires a supply voltage of 12 V. It is available in a compact gold plated aluminium housing with SMA female connectors. The compact size and modularity makes it ideal for a wide range of applications including satcom, telecom, space, aerospace and industrial.
 
Download Datasheet | Product Details
 
Sponsored by Pasternack
Pasternack
Over 45,000 RF, Microwave and Millimeter Wave Products Ship Same-Day
Pasternack supplies a very wide selection of over 45,000 quality RF, microwave and millimeter wave components from inventory or cable assembly builds. Products, including built-to-order custom cable assemblies (over 250,000 configurations possible), will ship the same-day. Click here to learn more.
 
 
 
RF Amplifier
K-Band WR-42 Waveguide Amplifier from 18 to 26.5 GHz

RF Amplifier from AmpliTech

The APTW4-18002650-214K10-42-S is a K-Band high gain, low noise waveguide amplifier that operates from 18 to 26.5 GHz. It provides a gain of 40 dB with a noise figure 2.40 dB and an output power of 18 dBm. The amplifier has a very low output return loss and a very smooth Gain curve of ±0.7 dB. It has been designed mainly for receiving systems for radar, SATCOM and other wireless applications.
 
Download Datasheet | Product Details
 
DLVA
18 to 40 GHz DLVA with 42 dB Logging Range

DLVA from Planar Monolithics Industries

The DLVA-18G40G-42-50-CD-1 from PMI is a DLVA that operates from 18 to 40 GHz. The DLVA has a dynamic range from -32 to 10 dBm and TSS of -34 dBm. It is available in a module that measures 1.86 x 1.69 x 0.40 inches with 2.92 mm female connector at the RF & SMA female at the video port.
 
Download Datasheet | Product Details
 
RF Transceiver
Wideband Microwave Transceiver from 2 to 18 GHz

RF Transceiver from Norden Millimeter

The NUDC2-18/1.3-2.3 from Norden Millimeter is a dual conversion Transceiver that operates from 2 to 18 GHz based on the OpenVPX architecture. It includes internal LOs which provide an instantaneous IF bandwidth of 1 GHz and exceptional Noise Figure of less than 15 dB. The transceiver is available in a low-SWaP 3U module and is digitally controlled by RS-485. Both the RF and IF paths include variable attenuation.
 
Product Details
 
Power Divider
8-Way Power Divider from 28 to 40 GHz

Power Divider from Pulsar Microwave

The The PS8-51-454/4S from Pulsar Microwave is a 8 Way power divider that operates from 28 to 40 GHz. It can handle a power of up to 30 Watts with an isolation of over 12 dB and insertion loss of under 2.3 dB. The power divider has an amplitude balance of 0.8 dB and phase balance of 12 degrees. It is available in a module that measures 4.0 X 2.0 X 0.40 inches with 2.92 mm female connectors.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
90 Degree Hybrid Coupler from 0.698 to 2.7 GHz

90 Degree Hybrid Coupler from MegaPhase

The QH-7N-1.6G from MegaPhase is a 90 Degree Hybrid Coupler that operates from 0.698 to 2.7 GHz. It has an insertion loss of less than 0.3 dB and an isolation of over 25 dB across the band. This low PIM quadrature hybrid coupler can handle up to 200 watts of power. It is available in a module with N-type connectors and is ideal for DAS systems.
 
Download Datasheet | Product Details
 
Power Divider
2 Way Resistive Power Divider from DC to 26.5 GHz

Power Divider from MECA

The 802-3-13.250 from MECA is a 2-way resistive power divider that operates from DC to 26.5 GHz covering all bands from VHS thru X and the Ku band. It can handle up to 1 watt of power, has an insertion loss of under 8.5 dB and a VSWR of 1.40:1. The power divider is available in a module with 2.92mm connectors.
 
Download Datasheet | Product Details
 
Sponsored by Pasternack
 
 
 
Phase Noise Analyzer
Real Time Phase Noise Analyzer from 10 MHz to 6 GHz

Phase Noise Analyzer from Holzworth Instrumentation

The HA7402C from Holzworth is a real time phase noise analyzer that operates from 10 MHz to 6 GHz. It is a high performance, low cost solution that has been developed to eliminate bottlenecks on manufacturing test lines. This analyzer combines traditional analog phase noise measurement front-ends (which are spur free) with cross correlation analysis.
 
Download Datasheet | Product Details
 
RF Transistor
240 W LDMOS FET from 1930 to 1995 MHz

RF Transistor from Wolfspeed, A Cree Company

The PXAC192908FV-V1 from Wolfspeed is an RF LDMOS FET that operates from 1930 to 1995 MHz. It provides a peak output power of 240 Watts with a gain of 14 dB and drain efficiency of 54%, while operating at 1990 MHz. The device is available in a thermally-enhanced package with earless flanges and is ideal for use in multi-standard cellular power amplifier applications.
 
Download Datasheet | Product Details
 
Frequency Synthesizer
SMT Programmable Frequency Synthesizer 0.05 to 6 GHz

Frequency Synthesizer from EM Research

The SLX Series from EM Research are programmable frequency synthesizers that operate from 0.05 to 6 GHz. The synthesizers provide an output power of up to 7 dBm and require an external reference from 5 to 100 MHz. The synthesized signal has a low phase noise with harmonics less than -15 dBc and spurious less than -50 dBc.
 
Download Datasheet | Product Details
 
RF Switch
75 Ohm SP6T SOI Switch from 5 to 2000 MHz

RF Switch from Qorvo

The QPC6762 is a 75 Ohm Silicon on Insulator (SOI) SP6T switch that operates from 5 to 2000 MHz. It has an insertion loss of 0.40 dB, an isolation of 34 dB at 800 MHz and an IP3 of 75 dBm at 850 MHz. The switch offers a high isolation symmetric topology with excellent linearity and power handling capabilities.
 
Download Datasheet | Product Details
 
RF Switch
GaAs MMIC SPDT Non-Reflective Switch from DC to 12 GHz

RF Switch from Analog Devices

The HMC232A is an absorptive SPDT Switch that operates from DC to 12 GHz. The switch has a low insertion loss of 1.5 dB and provides a high port to port isolation of 57 dB at 6 GHz. It can handle an input power of up to 30 dBm. The switch operates using complementary negative control voltage logic lines of -5/0V and requires no bias supply.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is the largest online database of RF & Microwave products. We list over 200,000 products from 1000+ manufacturers and enable users to search for the products by specification.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]