PREV 19th Sept, 2018 NEXT

New RF & Microwave Products this Week

19 Sept, 2018 - everything RF Newsletter

RF & Microwave industry updates

 
everything RF
Date: 19 Sept, 2018
 
Sponsored by Copper Mountain Technologies
 
 
 
New RF & Microwave Products this Week
Frequency Synthesizer
Low Power Fractional RF Synthesizer from 34.375 to 4400 MHz

Frequency Synthesizer from Integrated Device Technology

The 8V97051 is a Wideband RF Synthesizer / PLL from IDT that is optimized for use as the local oscillator (LO) in Multi-Carrier, Multi-mode FDD & TDD Base Station radio cards. The integrated Voltage Controlled Oscillator (VCO) supports output frequencies from 34.375 to 4400 MHz and maintains excellent phase noise and spurious performance.
 
Download Datasheet | Product Details
 
RF Amplifier
X-band 200 W GaN Based Solid State Power Amplifier

RF Amplifier from Linwave

The LW10-793541 from Linwave is a GaN based Solid State Power Amplifier that operates from 8.5 to 9.5 GHz in the X-band. It provides peak pulsed power of more than 52 dBm while operating over a 28 V supply. The amplifier is designed for X-band pulsed power applications with up to 80% duty cycle. It provides excellent thermal stability through the use of a high thermal conductivity carrier.
 
Download Datasheet | Product Details
 
RF Amplifier
Solid State GaN Power Amplifier from 20 MHz to 6 GHz

RF Amplifier from Aethercomm

The SSPA 0.020-6.000-70 from Aethercomm is a GaN solid state power amplifier that operates from 20 MHz to 6 GHz. It provides a signal gain of 50 dB and an output power of 70 W while operating on a 28 Vdc power supply. This SSPA can be turned on and off in less than 25 uSec. It is available in a module that measures 5 x 5 x 2 inches with SMA female connectors and is ideal for commercial and military applications.
 
Download Datasheet | Product Details
 
Antenna
Trapezoidal Log Periodic Antenna from 0.7 to 7.5 GHz

Antenna from AR RF/Microwave Instrumentation

The ATT700M8G is a wideband trapezoidal log-periodic antenna that operates from 0.7 to 7.5 GHz. It provides high power handling of up to 1200 watts, nearly constant gain of 8 dBi, and wide beam widths, which are nearly equal in the E and H planes. The antenna measures 28 x 28 x 56 cm and is ideal for applications requiring large uniform field areas, such as IEC-61000-4-3, MIL-STD-461 RS103, ISO 11451-2, ISO 11452-2 and DO-160G Section 20.
 
Download Datasheet | Product Details
 
VCXO
Ultra-Low Phase Noise VCXOs from 60 to 128 MHz

VCXO from NEL Frequency Controls

The AN-X3AUXXX5-X Series of SMD VCXOs operate from 60 to 128 MHz. They provide extremely low phase noise of -171 dBc/Hz at 10 kHz with a sine-wave or CMOS output in a small surface mount FR4 based package. These VCXOs requires a 3.3/5 V supply and have low G-sensitivity of 0.2 ppb/G.
 
Download Datasheet | Product Details
 
Antenna
World's Smallest NB-IoT Antenna

Antenna from Taoglas

The NCP.5820 from Taoglas is the world smallest ceramic NB-IoT antenna that covers Bands 5 (824 - 894 MHz), Band 8 (880 - 960 MHz) and Band 20 (791-862 MHz) simultaneously with a single matching configuration. The antenna is specifically designed to provide device manufacturers cost-effective global reach and high efficiency in a small form factor as they develop NB-IoT solutions. It is available in a low profile (2 mm) and has a small footprint (14.1 x 8.3 mm).
 
Download Datasheet | Product Details
 
Sponsored by Copper Mountain Technologies
Copper Mountain Technologies
New frequency extender for 18-54 GHz
This product is an addition to the existing CobaltFx mmWave frequency extension system already used by many companies. With the launch of the new FET1854 extenders, the CobaltFx system will allow engineers to build a scalable and affordable 5G testing solution up to 110 GHz. Click here to learn more.
 
 
 
Cellular Module
Integrated Cat-M1 & NB1 IoT Chipset

Cellular Module from Altair Semiconductor

The ALT1250 from Altair Semiconductor is a narrowband cellular IoT chipset with integrated GNSS/GPS capability. The module supports both Release 13 standards - CAT-M1 and NB1, and includes a wideband RF front-end supporting a wide range of combinations of LTE bands within a single hardware design.
 
Download Datasheet | Product Details
 
Bias Tee
Broadband DC Bias Tee from 16 KHz to 18 GHz

Bias Tee from HYPERLABS Inc.

The HL9440M is an amplitude and phase-matched Broadband DC Bias Tee that operates from 16 KHz to 18 GHz. It is designed to minimize reflections of high-speed signals at the DC insertion point. The Bias Tee has an insertion loss of under 1 dB, return loss of 25 dB at 10 GHz and can handle a DC current of up to 500 mA while operating over a supply of 10 Vdc.
 
Download Datasheet | Product Details
 
Directional Coupler
10 dB Directional Coupler from 2 to 18 GHz

Directional Coupler from Mini Circuits

The ZUDC10-02183-S+ from Mini-Circuits is a directional coupler that operates from 2 to 8 GHz. It has a coupling value of 10 dB, directivity of over 15 dB and an insertion loss of 0.3 dB. The coupler can handle up to 20 watts of power. It is available in a module with SMA female connectors and is ideal for cellular, military and lab testing applications.
 
Download Datasheet | Product Details
 
Directional Coupler
10/20 dB Directional Couplers from 7.5 to 16 GHz

Directional Coupler from P1dB Inc.

The P1CP-SAF-0716 Series from P1dB are directional couplers that operate from 7.5 to 16 GHz. They have coupling values of 10 & 20 dB and can handle up to 50 Watts of average power. These couplers have an insertion loss of under 0.3 dB, directivity of over 17 dB and a VSWR of 1.30:1. They are available in an aluminium module with SMA female connectors and are ideal for signal sampling, such as in a production test system.
 
Download Datasheet | Product Details
 
RF Cable Assembly
40 GHz Flexible Cable Assembly with K Plug Connectors

RF Cable Assembly from Jyebao

The K30K30-52R-40GXXX from Jyebao is a flexible cable assembly that operates up to 40 GHz. This super flexible test cable is available in different length options with K/2.92 mm connectors on either end of the cable. It has a return loss of under 18 dB.
 
Download Datasheet | Product Details
 
Vector Network Analyzer Extender
4x VNA Frequency Extender from 110 to 170 GHz

Vector Network Analyzer Extender from SAGE Millimeter

The STE-KF406-00-S1 from Sage Millimeter is a D-Band 4x frequency extender that upconverts an input frequency of 27.5 to 42.5 GHz at 5 dBm along with harmonic generation and filtering to produce a 110 to 170 GHz RF signal at -3 dBm. The frequency extender requires a supply voltage of 12 V. It has been designed as a benchtop unit with adjustable legs to allow for an easy test set up.
 
Download Datasheet | Product Details
 
Sponsored by Copper Mountain Technologies
 
 
 
RF Mixer
5 to 10 GHz Image Reject Mixer

RF Mixer from Polyphase Microwave

The IRM50100B from Polyphase Microwave is an Image-Reject mixer with a RF/LO frequency from 5 to 10 GHz and IF frequency from 10 to 90 MHz. It achieves up to 32 dB of image rejection and delivers a high LO-RF isolation of 50 dB. The mixer is available in a module that measures 1.35 x 2 inches with SMA female connectors and is ideal for high-performance microwave down converters and receivers.
 
Download Datasheet | Product Details
 
RF Switch
Reflective SPDT Switch from 30 MHz to 4.2 GHz1

RF Switch from Qorvo

The QPC3025 is a Silicon on Insulator, reflective SPDT switch that operates from 30 to 4200 MHz. It offers low insertion loss in a symmetric topology with excellent linearity. The switch can handle upto 20 W CW and 30 W pulsed power with a 50 Ohm load. The switch is available in a RoHS-compliant, compact 5 x 5 mm surface-mount leadless package and is designed for use in 4G / 5G wireless infrastructure applications and other high performance communications systems.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing

RF Shielded Test Enclosure from RF Electronics

The HDRF-2124-T from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. It has a thick RF absorbing foam that provides an isolation of more than 90 dB. It has shielded power filters for providing power connection in the box while blocking all wireless signals. The HDRF-2124-T has a number of I/O connector options that include HDMI, RJ45, USB, DB9, VGA, DB25 and AC/DC.
 
Download Datasheet | Product Details
 
RF Module
Dual Band Wi-Fi/Bluetooth Low Energy 5.0 Module

RF Module from Telit Communications

The WE866E4-P is a fully integrated dual-band (2.4/5GHz) Wi-Fi / Bluetooth Low Energy 5.0 module for high bandwidth IoT applications. It has an integrated tri-core system-on-chip, with dedicated CPU’s for IoT application, Wi-Fi and BLE. The IoT application processor runs on ARM Cortex-M4F @128 MHz with 300 KB of dedicated SRAM.
 
Download Datasheet | Product Details
 
Power Divider
500 W, 2-Way Power Divider from 698 to 2700 MHz

Power Divider from RF Industries

The RFPS-2C-DF from RF Industries is a 2-way power divider that operates from 698 to 2700 MHz. The device has an insertion loss of under 0.1 dB, low PIM of -155 dBc (relative to carrier) and can handle an average input power of up to 500 watts. It is available in a module that measures 9.1 x 3.2 x 1.5 inches with 7-16 DIN female connectors.
 
Download Datasheet | Product Details
 
RFID Tag
Synthetic RFID Label for On-Metal Applications

RFID Tag from Omni-ID, Ltd

The IQ 350 from Omni-ID is EPC Class 1 Gen2v2 UHF RFID Label that operates from 866-868 MHz (EU) and 902-928 MHz (US). It has a read range of up to 3.5 m (Fixed reader) and up to 2 m (Handheld reader). The synthetic label measures 50 x 12.5 x 1.35 mm and weighs only 0.5 gm. The labels are ideal for on-metal applications such as IT, office, hospital and laboratory asset tracking.
 
Download Datasheet | Product Details
 
RF Amplifier
28.5 dBm Low Noise Amplifier from 0.05 to 6 GHz

RF Amplifier from Guerrilla RF

The GRF5010 from Guerrilla RF is a high linearity, high power, low noise amplifier that can be tuned from 0.05 to 6 GHz with fractional bandwidths greater than 30%. At 2.5 GHz, it provides a gain of 17 dB with a noise figure of 0.85 dB. The LNA delivers a P1dB of 28.5 dBm, OIP3 of 45 dBm while operating from an 8 volt supply, consuming 95 mA of current.
 
Download Datasheet | Product Details
 
Up Converter
2 and 3000 MHz Upconverter with 5 kHz Resolution

Up Converter from NuWaves Engineering

The RF2-3000UCV1 from NuWaves Engineering is a multi-octave RF upconverter that accepts an input signal from 2 MHz to 70 MHz and upconverts it to an output signal from 2 MHz and 3000 MHz with 5 kHz tuning resolution. It provides 50 dB of user-selectable attenuation control and has two IF bandwidth options of 4 MHz and 35 MHz.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, white papers, articles and interviews. We also have the largest searchable database of RF & Microwave components.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]