PREV 24th Sept, 2018 NEXT

Latest News & White Papers this Week

24 Sept, 2018 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 24 Sept, 2018
 
Sponsored by OEM Secrets
 
 
 
Latest News this Week
Lockheed Martin Receives GPS III Follow-on Contract from US Air Force - Lockheed Martin
Miniaturized Device on a User's Tooth Enables Hands-Free Radio Calls - Sonitus Technologies
World's First OTA Test System for Simultaneous 5G Sub-6 GHz - EMITE
R&S GNSS Simulator Now Equipped with GPS L5 & Galileo E5 Simulation Capabilities - Rohde & Schwarz
Cypress Introduces Bluetooth Audio Solution to Provide Better User Experience for Wireless Earbuds - Cypress Semiconductor
BAE Systems Receives AFRL Contract to Support GaN-Based Semiconductor Technology - BAE Systems
Researchers Develop New Approach to Improve the Accuracy of GPS on Smartphones - University of Otago
New EU Project Studying the Use of GaN for NextGen 5G Cellular Networks - Fraunhofer
R&S Introduces World's First Bluetooth LE Signaling Test Solution - Rohde & Schwarz
NXP to Showcase its Latest RF LDMOS Products at EuMW 2018 - NXP Semiconductors
Taoglas Introduces the World’s Smallest NB-IoT Antenna - Taoglas
Long-Range Wireless Power Technology to Remotely Charge Smart Devices - Wi-Charge
More News
New White Papers
7 Reasons You're Paying Too Much for Your Spectrum Analyzer - Signal Hound
Testing High Power GaN Amplifiers for Radar Signals Using Peak Power Meters - Boonton
What is Noise Figure and How to Improve it with a Low Noise Amplifier - NuWaves Engineering
Broadband Chokes for Bias Tee Applications - Coilcraft
Overcoming the RF Challenges of Full-Screen Smartphones - Qorvo
More White Papers
Upcoming Event
Event Image
European Microwave Week 2018

Date: 23 to 28 September 2018

Location: Madrid, Spain

 
More Events
Featured Products this Week
RF Amplifier
200 W Solid State GaN Power Amplifier from 6 to 18 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2065A is a solid state GaN power amplifier that operates from 6 to 18 GHz. It provides a saturated output power of more than 200 watts with a gain of over 53 dB. The amplifier has a wide instantaneous bandwidth and is suitable for all single channel modulation standards. It is available as a rack mount amplifier that measures 482 x 311 x 600 mm and weighs 150 lbs.
 
Download Datasheet | Product Details
 
RF & Microwave Isolator
20 W RF Isolator from 2 to 6 GHz

RF & Microwave Isolator from MECA

The IS-4.000 from MECA is a RF isolator that operates from 2 to 6 GHz. It has an insertion loss of 0.7 dB and provides an isolation of over 14 dB. The isolator can handle up to 20 watts of average power. It is available in a module with SMA female stainless steel connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
L-Band/S-Band Bidirectional Amplifier from 1.5 to 2.5 GHz

RF Amplifier from NuWaves Engineering

The NuPower XtenderTM 12B04A-07 from NuWaves is a bi-directional amplifier that operates from 1.5 to 2.5 GHz. This L-Band/S-Band amplifier provides 2.5 watts of linear power (5% EVM at 34 dBm). This compact and light weight bi-directional amplifier is ideal for extending the communication range of half duplex L or S-band transceivers running constant-envelope or near-constant-envelope waveforms.
 
Download Datasheet | Product Details
 
Signal Generator
10 MHz to 40 GHz, Phase Coherent, Multi-Channel RF Synthesizers

Signal Generator from Holzworth Instrumentation

The HSX Series are broadband, phase coherent frequency sources that are available in five frequency configurations from 10 MHz to 3 GHz, 6 GHz, 12 GHz, 24 GHz and 40 GHz. They exhibit industry leading phase noise and spectral purity performance coupled with a highly accurate dynamic range of +20 dBm to -110 dBm.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
90 Degree Hybrid Coupler from 0.698 to 2.7 GHz

90 Degree Hybrid Coupler from MegaPhase

The QH-7N-1.6G from MegaPhase is a 90 Degree Hybrid Coupler that operates from 0.698 to 2.7 GHz. It has an insertion loss of less than 0.3 dB and an isolation of over 25 dB across the band. This low PIM quadrature hybrid coupler can handle up to 200 watts of power. It is available in a module with N-type connectors and is ideal for DAS systems.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise Gain Block Amplifier from 10 to 2500 MHz

RF Amplifier from AmpliTech

The APTMP3-00010250-2015-D9 from Amplitech is a low noise gain block amplifier that operates from 10 to 2500 MHz. The amplifier provides an output power of 22 dBm with a gain of 25 dB and a noise figure of 0.75 dB. The amplifier is available in multiple configurations with different supply voltages +3V/5V/10V/12V/15V.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
Standalone RF Shielded Test Enclosure up to 75 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-24144 from RF Electronics is a standalone RF Shielded Test Enclosure that operates at frequencies up to 75 GHz (Higher frequency options also available). It is equipped with a thick RF absorbing foam that provides a reflection loss of more than -23 dB @ 60 GHz and higher frequencies. The shielded box measures 610 x 610 x 610 mm and is ideal for 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G Device Testing.
 
Download Datasheet | Product Details
 
RF Switch
0.6 to 6.0 GHz 4xSPST Antenna Tuning Switch

RF Switch from Skyworks Solutions

The SKY5-9256-701LF is a 4x SPST switch designed for antenna tuning applications that operate from 600 MHz to 6 GHz. This 16-state antenna aperture tuner has reliable linear operation and extremely low Ron (1.1 ohm) and Coff (145fF) to deliver superior antenna performance, allowing system designers to recover the 1.5 to 3 dB gain degradation caused by shrinking antenna sizes.
 
Download Datasheet | Product Details
 
RF Amplifier
100 W GaN Amplifier Module from 0.5 to 2.7 GHz

RF Amplifier from KeyLink Microwave

The KB0527M50A from KeyLink Microwave is a multi-octave high power amplifier that operates from 0.5 to 2.7 GHz. This GaN amplifier provides a saturated output power of 100 Watts with a gain of 51 dB. It is available in a module that measures 180 x 90 x 25 mm with SMA female connectors and is ideal for jamming, EMC, test and measurement applications.
 
Download Datasheet | Product Details
 
RF Amplifier
90 W Hybrid Power Amplifier from 1 to 6 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 100HM1G6AB-50 from AR RF/Microwave Instrumentation is a compact hybrid amplifier that operates from 1 to 6 GHz. The amplifier provides an output power of 90 watts with a small signal gain of 64 dB and excellent flatness, noise figure and intermodulation distortion over the band. This power amplifier can be used by both military and commercial industries.
 
Download Datasheet | Product Details
 
OCXO
5 to 40 MHz SMD OCXOs

OCXO from Dynamic Engineers

The OCXO1490S series of OCXOs from Dynamic Engineers provide an oscillation frequency from 5 to 40 MHz. These SMD OCXOs have a phase noise of -140 dBc/Hz at 1 kHz and a stability of ±30 ppb over a temperature range of -40 to 85°C. They require a supply voltage of 3.3/5V and provide a HCMOS waveform output.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Right Angle SMA-Plug to SMA-Jack Flexible Cable Assembly

RF Cable Assembly from Jyebao

The A39A85-52L-18GXXX from Jyebao is a SMA plug right angle to SMA jack flexible cable assembly that operates up to 18 GHz. This test cable is available in different lengths and has a return loss of 16.5 dB.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Real-Time Modular Benchtop Spectrum Analyzer from 9 kHz to 20 GHz

RF Spectrum Analyzer from Aaronia AG

The Spectran V5 Real Time Spectrum Analyzer from Aaronia is available as a benchtop device in four frequency configurations: 9 kHz to 6 GHz, 12 GHz, 16 GHz and 20 GHz. This analyzer has a real time analysis bandwidth that varies from 44 MHz in the 6 GHz model to 175 MHz in the 20 GHz model.
 
Download Datasheet | Product Details
 
RF Amplifier
High Power Amplifier from 6 to 18 GHz

RF Amplifier from ERZIA

The ERZ-HPA-0600-1800-32 from ERZIA is a high power amplifier that operates from 6 to 18 GHz. The amplifier produces a saturated output power of 32 dBm with a gain of 23 dB. It is available in a module with SMA female connectors. Hi-reliability and dedicated screening/environmental tests are available on request.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
100 MHz to 18 GHz Mini Benchtop Programmable Attenuator Assembly

RF Variable Attenuator from JFW Industries

The 50BA-031-31 from JFW Industries is a compact benchtop programmable attenuator assembly that operates from 100 MHz to 18 GHz. It has two solid-state attenuators, each with an attenuation range of 0 to 31 dB with 1 dB steps. The assembly can handle an input power of up to 25 dBm and has switching speed of 1 microsecond.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
Low Cost, High Performance Real Time Spectrum Analyzer from 100 kHz to 20 GHz

RF Spectrum Analyzer from Signal Hound

The SM200A from Signal Hound is a high-performance RF spectrum analyzer and monitoring receiver that operates from 100 kHz to 20 GHz. This realtime analyzer has been designed for fast and accurate data analysis at a low cost possible. It sweeps at 1 THz/sec with a 30 kHz RBW and has 160 MHz of instantaneous bandwidth with a dynamic range of 110 dB.
 
Download Datasheet | Product Details
 
Sponsored by OEM Secrets
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news stories, white papers, technical articles, interviews, information on new product releases, interviews and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]