PREV 26th Sept, 2018 NEXT

New RF & Microwave Products this Week

26 Sept, 2018 - everything RF Newsletter

 
everything RF
Date: 26 Sept, 2018
 
Sponsored by Signal Hound
 
 
 
New RF Products this Week
Front End Module
LTE-M / NB-IoT Front End Module for IoT Applications

Front End Module from Skyworks Solutions

The SKY68020-11 from Skyworks is Front-end Solution for IoT Applications. This hybrid multi-band, multi-chip module supports LTE-M / NB-IoT (half-duplex system) transceiver systems. The module contains the entire RF Front End required for an LTE multi-band radio operating at low-band and mid-band frequencies. It includes Rx-low pass filters, broadband PA with a bias controller, Tx low-pass harmonic filter, antenna switch and MIPI RFFE controller.
 
Download Datasheet | Product Details
 
RF Amplifier
20 W Solid State Amplifier from 6 to 26.5 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2059B from Exodus Advanced Communications is a high power solid state amplifier that operates from 6 to 26.5 GHz. It products provides up to 20 watts of power and 43 dB of gain with a flatness of 6 dB. This rack mounted amplifier requires a 100 to 240 V AC Supply. It can be used for most modulation standards and has built-in protection circuits making it ideal for high-reliability and rugged applications.
 
Download Datasheet | Product Details
 
RF Connector
Quick-Disconnect Connectors up to 18 GHz

RF Connector from MegaPhase

The ZMA Series from MegaPhase are Quick-Disconnect Connectors that operate up to 18 GHz. The bayonet-style coupling nut is easily mated and de-mated with a quarter turn, without the need for a torque wrench. These connectors are ideal for applications such as antenna systems, where it provides excellent mechanical stability and eliminates the need for lock wiring in high vibration environments where space is limited.
 
Download Datasheet | Product Details
 
Fixed Attenuator
100 W Low PIM Attenuators from 0.698 to 2.7 GHz

Fixed Attenuator from MECA

The LPA100-dB-17WWP series from MECA are Low PIM attenuators that operate from 0.698 to 2.7 GHz. These attenuators are available in attenuation configurations up to 30 dB and can handle up to 100 watts of average power. They have a PIM of -161 dBc with 2 x 20 Watt Tones Verified @1900 MHz. These attenuators are available in a module with 4.3/10 female connectors and are ideal for IDAS / ODAS, In-Building, base station, wireless infrastructure, 4G, and AWS applications.
 
Download Datasheet | Product Details
 
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer from Holzworth Instrumentation

The HA7062C from Holzworth is a real time fully integrated phase noise analysis system that operates from 10 MHz to 26 GHz. This analyzer offers extremely fast measurement speeds to reduce product development time and/or optimize ATE manufacturing throughput. It is available in a fully shielded, fan-less 1U chassis that completely eliminates ground loops and troublesome microphonics for uncompromised performance and repeatability.
 
Download Datasheet | Product Details
 
RF Amplifier
C & X-Band Low Noise Amplifier from 5 to 10 GHz

RF Amplifier from NuWaves Engineering

The HILNA-CX from NuWaves is a low noise amplifier that operates from 5 to 10 GHz. It delivers a gain of over 35 dB with a noise figure of 2.5 dB and OIP3 of 21 dBm. The amplifier requires a supply of 12 V and consumes up to 170 mA of current. It is available in a ruggedized COTS module that measures 1.77 x 1.52 x 0.45 inches with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
10 W Power Amplifier Module from 6 to 18 GHz

RF Amplifier from KeyLink Microwave

The KB60180M40A from KeyLink Microwave is a multi-octave high power amplifier that operates from 6 to 18 GHz. This GaN amplifier provides a saturated output power of 10 Watts with a gain of 40 dB. It is available in a module that measures 150 x 90 x 25 mm with SMA female connectors and is ideal for for jamming, EMC, test and measurement applications.
 
Download Datasheet | Product Details
 
Power Divider
Low PIM 3-Way Power Divider from 578 to 2700 MHz

Power Divider from Advanced RF Technologies

The ADRF-3WS-20W-4310 is a Low PIM 3-Way power divider that operates from 578 to 2700 MHz. The divider can handle up to 20 watts of average power and 200 watts of peak power. It provides a port to port isolation of over 20 dB and insertion loss of 5.5 dB. It has 161 dBc PIM @ 2 tone x 43 dBm. The power divider is available in a module with 4.3-10 Female connectors.
 
Download Datasheet | Product Details
 
RF Module
2.4 GHz Long Range Radio Module

RF Module from Wurth Elektronik

The AMB2220 is a compact high performance 2.4 GHz (half-duplex) long range wireless module. It can provide an output power of up to 10 dBm allowing a transmission range from 500 meters (line of sight) to 5 km (with an external antenna) based on the type of transmission. The module has an integrated microprocessor that controls data communication, handling packet and checksum generation, addressing, monitoring of channel access and re-transmission of lost packets.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise Gain Block Amplifier from 10 to 2500 MHz

RF Amplifier from AmpliTech

The APTMP3-00010250-2015-D9 from Amplitech is a low noise gain block amplifier that operates from 10 to 2500 MHz. The amplifier provides an output power of 22 dBm with a gain of 25 dB and a noise figure of 0.75 dB. The amplifier is available in multiple configurations with different supply voltages +3V/5V/10V/12V/15V.
 
Download Datasheet | Product Details
 
Signal Generator
Ultra Low Noise Signal Generator up to 40 GHz

Signal Generator from AnaPico

The APULN40 from Anapico is an ultra low noise Microwave Signal Generator up to 40 GHz. This signal generator has fast switching speeds and high signal purity with a low phase noise. The output power range of this generator varies from -120 to 25 dBm. It supports pulse, AM, FM and PM modulation and can be remote controlled using Ethernet, USB, GPIB (SCPI v1999) interfaces.
 
Download Datasheet | Product Details
 
Signal Generator
Touch Screen Signal generator from 100 kHz to 3 or 6 GHz

Signal Generator from Rohde & Schwarz

The R&S SMW200A from Rohde and Schwarz is a touch screen vector signal generator that operates from 100 kHz to 3 or 6 GHz. It can provide up to 18 dBm of an output power, has a phase noise of -139 dBc/Hz and a setting time of 1 ms. The R&S SMW200A is ideal for generating complex, digitally modulated signals for the communication, aerospace and defense sectors.
 
Download Datasheet | Product Details
 
RF Switch
GaN SPDT Switch from DC to 12 GHz

RF Switch from United Monolithic Semiconductors

The CHS7012-99F is a reflective SPDT switch based on GaN Technology that operates from DC to 12 GHz. The switch can handle an input power of up to 40.5 dBm, has an insertion loss of under 1.4 dB and provides an isolation of 35 dB. It is developed on a robust 0.25µm gate length GaN/SiC pHEMT process and is available as bare die that measures 1.15 x 1.65 x 0.1 mm.
 
Download Datasheet | Product Details
 
RF Module
Bluetooth 5.0 Module for IoT Applications

RF Module from Silicon Labs

The Bluetooth Xpress BGX13S from Silicon Labs is a Bluetooth 5 SiP module that delivers a serial-to-Bluetooth 5 solution that requires no wireless firmware development for applications. It has integrated antenna, RF certifications, built-in cloud connectivity for secure updates through the Xpress framework for iOS and Android development.
 
Download Datasheet | Product Details
 
RF Amplifier
Dual-Chanel MIMO Bi-Directional Amplifier from 1350 to 1390 MHz

RF Amplifier from Triad RF Systems

The TTRM1081D from Triad RF Systems is a dual-channel MIMO Bi-Directional Amplifier that operates from 1350 to 1390 MHz. The amplifier provides 44 dBm of output power (per channel) when transmitting with a gain of 25 dB. On the receive side, it provides a gain of 11 dB and a noise figure of 2 dB. This class AB LDMOS module is designed for both military and commercial applications.
 
Download Datasheet | Product Details
 
Sponsored by Signal Hound
Signal Hound
7 Reasons You’re Paying Too Much for Your Spectrum Analyzer
With PC-based spectrum analyzers becoming mainstream, maintaining the status quo begs the question: why let big, expensive spectrum analyzers of the past limit your test capabilities and capacity? Signal Hound spectrum analyzers offer unrivaled value by providing the best price/performance ratio on the market. Download our latest Tech Brief – 7 Reasons You’re Paying Too Much for Your Spectrum Analyzer – to learn more.
 
 
 
Antenna
Chip Antenna for 5G Automotive Applications

Antenna from INPAQ

The VGAP-CLC-AS-A1 from INPAQ is a chip antenna developed for automotive applications that operates from 5000 to 6000 MHz. It delivers a gain of up to 4.4 dBi with an efficiency of 87 %. The antenna is available in a surface mount package that measures 5.2 x 3.7 x 0.7 mm and is ideal for 5G automotive applications.
 
Download Datasheet | Product Details
 
Antenna
High Efficiency, SMT Antenna for LTE/Cellular Applications

Antenna from Taoglas

The PCS.26.A from Taoglas is a low profile, SMT, penta-band antenna for LTE/Cellular applications (600 to 2300 MHz). This antenna can be directly mounted on a PCB to give high efficiency in a very small form factor - measuring just 54.6 x 13.3 mm. Its small size and rectangular shape make it very easy to integrate.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
Dual Channel (2 x 93 dB) Variable Attenuator from 380 MHz to 6 GHz

RF Variable Attenuator from Hytem

The 03.02.510 from Hytem is a dual channel variable attenuator that operates from 380 to 6000 MHz. The module has an LCD display with push buttons to control the attenuation level. The attenuation can also be controlled via USB interface from a computer. This dual channel attenuator has an attenuation range of 2 x 93 dB with a 0.5 dB step size and an attenuation change speed of 100 ns.
 
Download Datasheet | Product Details
 
Power Divider
2-Way Power Divider from 700 MHz to 6 GHz

Power Divider from Innovative Power Products

The IPP-1272 from Innovative Power Products is a 2-way power divider that operates from 700 to 6000 MHz. It has an insertion loss of less than 0.9 dB with an isolation of more than 8 dB. The divider can handle up to 125 watts of power and has a VSWR of under 1.35:1. It is available in a module that measures 3 x 5.20 inches with SMA female connectors.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
90-degree Quadrature Hybrid Coupler from 2 to 4 GHz

90 Degree Hybrid Coupler from Werbel Microwave

The WMQH-2-4-S from Werbel Microwave is a 90-degree Quadrature Hybrid Coupler that operates from 2 to 4 GHz. It can handle up to 50 watts of power and has a phase unbalance of +/- 2 degrees, an isolation of over 25 dB and a VSWR of 1.2:1. The hybrid coupler is available in a module with SMA-Female connectors.
 
Download Datasheet | Product Details
 
Sponsored by Signal Hound
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave industry. Our weekly newsletters tell users about new and interesting products, the latest news stories, white papers and much more.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]