PREV 29th Oct, 2018 NEXT

Latest News & White Papers this Week

29 Oct, 2018 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 29 Oct, 2018
 
Sponsored by PCB Directory
 
 
 
Latest News this Week
Qualcomm Unveils the Smallest 5G NR mmWave Antenna Module - Qualcomm
Breakthrough Resonator Technology to Enable High-Performance Filters for 5G Devices - Resonant Inc
European GNSS Agency Accepting Proposals for Development of Galileo-enabled Multi-frequency Antenna - European GNSS Agency
Researchers to Use beamed Microwave Energy for Launching Space Vehicles - AFOSR
First 3GPP-compliant 5G NR Sub-6 GHz Call Successfully Made with a Mobile Sized Test Device - Qualcomm
R&S to Exhibit Next-Gen T&M Solutions for 5G, Automotive and IoT at electronica 2018 - Rohde & Schwarz
Industry’s First CE Certified RF System-in-Package with Sigfox Connectivity - ON Semiconductor
RF Tunable Filter Market to be Worth $87 Million by 2023 - MarketsandMarkets
Researchers Develop Method to Detect Location in GPS-Challenged Environments - US Army Research Laboratory
Start-up Develops Battery Free Bluetooth 5.0 Devices for IoT - Atmosic Technologies
Engineers Develop Low Cost Navigation System for Unmanned Aerial Systems - ACORDE
NI Trend Watch 2019 Explores IoT, 5G Deployment and Autonomous Driving - National Instruments
Anritsu Releases 5G-NR Signal Generation Software for its Signal Analyzers - Anritsu
World's First 120-Kilowatt Wireless Charging System for Electrical Vehicles - Oak Ridge National Laboratory
More News
New White Papers
Choosing Blocking Capacitors – It’s More than Just Values - Dielectric Laboratories, Inc.
IQ, Image Reject & Single Sideband Mixer Primer - Marki Microwave
Millimeter-Wave Radio Transmission: Atmospheric Propogation, Link Budget and System Availability - LightPointe
Introduction to SAW Filter Theory & Design Techniques - API Technologies
Bust the Top Myth of 5G Adoption to Lead the Evolution of the Internet of Things - Telit Communications
More White Papers
Upcoming Event
Event Image
DC5G

Date: 12 & 13 November, 2018

Location: Washington D.C.

 
More Events
Featured Interview
Featured Interview
Interview with Jim Morgan from SemiGen, Inc.
everything RF Interviewed Jim Morgan, CEO & Founder at SemiGen, Inc., a full-service RF/microwave solutions company that provides the manufacturing services, components, and other products needed to fill the voids in your supply chain and manufacturing department. Click here to read the interview.
 
 
 
Featured Products this Week
RF Amplifier
Cryogenic Amplifier from 1 to 18 GHz

RF Amplifier from AmpliTech

The APTC4-01001800-1910-D4 from AmpliTech is a Cryogenic Amplifier that operates from 1 to 18 GHz. It provides an output power of 8 dBm and a gain of 23 dB with a noise figure of 2.5 dB. The amplifier is available in a drop-in package with SMA female connectors.
 
Download Datasheet | Product Details
 
Band Pass Filter
Low Cost Custom RF Filter from 300 MHz to 2.4 GHz

Band Pass Filter from NuWaves Engineering

The µFILTER from NuWaves is a low-cost miniature RF filter designed to allow the end user the capability to select a custom filter (Bandpass, Highpass, Low-Pass, or Band-Reject). The custom band-pass filter can be fine tuned to have any frequency requirement from 300 MHz to 2.4 GHz with 3 dB bandwidth from 1% to 40%. The filter is available in a module with standard SMA connectors.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure for Applications up to 6 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-1560-A from RF Electronics is a RF Shielded Test Enclosure that can be used to test devices operating up to 6 GHz. It has a thick RF absorbing foam that provides a reflection loss of over 18 dB at 2.4 GHz. The test enclosure has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
Power Divider
20 W, 6-Way Power Divider from 1.5 to 2.7 GHz

Power Divider from MECA

The 806-2-2.100 from MECA is a 6-way power divider that operates from 1.5 to 2.7 GHz. It can handle up to 20 watts of power, has an insertion loss of under 0.8 dB and isolation over 22 dB. The power divider is available in a module with SMA Female connectors.
 
Download Datasheet | Product Details
 
RF Connector
Quick-Disconnect Connectors Up to 18 GHz

RF Connector from MegaPhase

The ZMA Series from MegaPhase are Quick-Disconnect Connectors that operate up to 18 GHz. The bayonet-style coupling nut is easily mated and de-mated with a quarter turn, without the need for a torque wrench. These connectors are ideal for applications such as antenna systems, where it provides excellent mechanical stability and eliminates the need for lock wiring in high vibration environments where space is limited.
 
Download Datasheet | Product Details
 
RF Amplifier
2000 W, Pulsed Power Amplifier from 1.2 to 1.4 GHz

RF Amplifier from KeyLink Microwave

The KNP1300M63A from KeyLink Microwave is an L-band high power pulsed amplifier module that operates from 1.2 to 1.4 GHz. This amplifier provides a pulse width of up to 50 uS with a duty cycle of up to 10%. It delivers a peak output power of 2000 watts into a 50 ohm load, while operating over a 50 V supply.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
3.5 mm NMD jack to N jack Between Series Adapter up to 18 GHz

Between Series RF Adapter from Jyebao

The ADS-VNAPC8N8 from Jyebao is a 3.5 mm NMD jack to N jack coaxial adapter that operates up to 18 GHz. It has a VSWR of up to 1.15:1 and is matched to 50 ohms. The adapter has a stainless steel body with a Beryllium Copper center contact.
 
Download Datasheet | Product Details
 
Vector Network Analyzer
4-Port Vector Network Analyzer from 100 kHz to 9 GHz

Vector Network Analyzer from Copper Mountain Technologies

The C2409 from Copper Mountain Technologies is a 4-port modular vector network analyzer that operates from 100 kHz to 9 GHz. The VNA can measure all S parameters S11, S12, S21, S22, S44 and can be controlled using any Windows PC or laptop. It has a dynamic range of up to 162 dB (1Hz IF BW), directivity of 46 dB and sweep speeds of as low as 10 microseconds per point.
 
Download Datasheet | Product Details
 
Wireless SoC
802.11ac Wave-2 SoC with MU-MIMO

Wireless SoC from Qualcomm

The QCA9994 from Qualcomm is a 802.11ac Wave-2 SoC with MU-MIMO and 160 MHz for Enterprise Networks. This SoC enables Wi-Fi access points to support more devices and more demanding applications in the enterprise and carrier hotspots. The dual-band, 4x4 solution delivers peak data rates up to 1.7 Gbps, and uses Multi-User MIMO to maintain faster connections on increasingly crowded networks.
 
Download Datasheet | Product Details
 
Block Up Converter
200 W Ku-Band Solid State Block Upconverter

Block Up Converter from Comtech Xicom Technology

The XTSLIN-200K-B1 from Xicomtech is a Solid State Block Up Converter that operates in the Ku-band with an input frequency from 950 MHz to 1700 MHz and an RF frequency from 13.75 to 14.5 GHz. It generates a linear power of over 200 Watts with a small signal gain of up to 70 dB.
 
Download Datasheet | Product Details
 
RF Amplifier
1000 W X-Band Solid State Pulse Amplifier

RF Amplifier from Advantech Wireless

The APRA-X5000A from Advantech Wireless is a X-Band Solid State Pulse Amplifier that operates from 8.9 to 9.5 GHz. It provides an output of more than 1000 W @ 15% duty cycle over the full band and operating temperature range. The amplifier has a fast pulse rise/fall times of under 50 ns. The in-built duty cycle monitor and pulse width monitor ensures trouble free operation.
 
Download Datasheet | Product Details
 
RF Spectrum Analyzer
High-Performance Signal & Spectrum Analyzers upto 85 GHz

RF Spectrum Analyzer from Rohde & Schwarz

The R&S FSW series of signal and spectrum analyzer are high performance analyzers that operate at frequencies up to 85 GHz (2 Hz to 85 GHz (8, 13.6, 26.5, 43.5, 50, 67 and 85 GHz). The analyzers have a wide analysis bandwidth of 160 MHz (below 26.5 GHz) and 2 GHz above 26.5 GHz. They have a straight forward and intuitive interface and can be controlled from an in-built, high resolution 12" touch screen.
 
Download Datasheet | Product Details
 
EMF Meter / Antenna
Electromagnetic Field Strength Meter from DC to 40 GHz

EMF Meter / Antenna from WaveControl

The SMP2 from Wave Control is an Electromagnetic Field Strength Meter. This 2-in-1 device has a field probe range from DC to 40 GHz using RMS/Isotropic Field probes and can be used industrial frequency spectrum analysis from DC to 400 kHs (Real-time FFT). It can be used to conduct high-quality measurements easily.
 
Download Datasheet | Product Details
 
PXI RF Switch
Dual 6x1 (SP6T) PXI RF Multiplexer Switch Module up to 40 GHz

PXI RF Switch from National Instruments

The PXI-2796 from National Instruments is a Dual 6x1 (SP6T) PXI RF Multiplexer Switch Module that operates up to 40 GHz. This 50 ohm switch module has a high-density, unterminated multiplexer with dual 6x1 multiplexer banks in the same module. It can handle an input power of up to 18 watts.
 
Download Datasheet | Product Details
 
Phase Locked Loop
23.5 MHZ to 6 GHz Fractional/Integer-N Synthesizer/VCO

Phase Locked Loop from Maxim Integrated

The MAX2870 from Maxim Integrated is a phase-locked loop (PLL) with integrated voltage controlled oscillators (VCOs) that operates in both integer-N and fractional-N modes. It is capable of synthesizing frequencies from 23.5 MHz to 6.0 GHz while maintaining superior phase noise and spurious performance, when combined with an external reference oscillator and loop filter.
 
Download Datasheet | Product Details
 
Sponsored by PCB Directory
 
 
 
About everything RF
everything RF keeps users up to date with the latest RF & Microwave Products. Use the parametric search tool to find RF & Microwave Products based on your requirements. We have listed over 200,000 Products from the leading manufacturers in the industry.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]