PREV 31th Oct, 2018 NEXT

New RF & Microwave Products this Week

31 Oct, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 31 Oct, 2018
 
Sponsored by PCB Directory
 
 
 
New RF Products this Week
Vector Network Analyzer
2-Port Vector Network Analyzer from 10 MHz to 26.5 GHz

Vector Network Analyzer from Micran

The R4226 is a high performance Vector Network Analyzer from Micran that operates from 10 MHz to 26.5 GHz. This two port analyzer has a high dynamic range of 145 dB at 1 Hz IF Bandwidth and a wide power range from -90 to 15 dB. It uses a modular approach and can be controlled by a software program installed on a computer.
 
Download Datasheet | Product Details
 
RF Mixer
17 to 21 GHz I/Q MMIC Mixer

RF Mixer from Arralis

The LE-Ka1340301 from Arralis is an I/Q MMIC diode mixer with integrated quadrature coupler for single sideband (LO-IF/LO-RF) operation in either upconverter or downconverter modes. The mixer has an RF Frequency from 17 GHz to 21 GHz using a fixed LO at 24 GHz and varying the IF from 2 to 7 GHz or vice versa.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
4-Bit Silicon Digital Attenuator from 100 MHz to 40 GHz

RF Variable Attenuator from Analog Devices

The ADRF5731 from Analog Devices is a 4-Bit Silicon Digital Attenuator that operates from 100 MHz to 40 GHz. This attenuator has a 30 dB range with a step size of 2 dB. It has an insertion loss of less than 3.5 dB, and can handle up to 26 dBm of average power and 30 dBm of peak power. The ADRF5731 requires a dual supply voltage of +3.3 V and -3.3 V.
 
Download Datasheet | Product Details
 
RF Mixer
UltraCMOS Passive Mixer with Integrated LO Amplifier

RF Mixer from pSemi

The PE4151 from pSemi is an UltraCMOS passive mixer with an integrated LO amplifier that operates from 136 to 520 MHz. This ultra-high linearity quad metal-oxide-semiconductor field-effect transistor (MOSFET) mixer is designed for use in upconversion and downconversion applications and is ideal for highly magnetic environments such as medical applications.
 
Download Datasheet | Product Details
 
Bias Tee
Bias Tee from 30 kHz to 85 GHz

Bias Tee from Pulsar Microwave

The BT-55-401D from Pulsar Microwave is a Bias Tee that operates from 30 kHz to 85 GHz. It has an insertion loss of under 4 dB, an isolation of over 30 dB and a VSWR of 2.00:1. The Bias Tee can handle an input RF power of up to 1 watts and max DC levels of 25 VDC. It is available in a module that measures 1.42 x 0.60 x 0.50 inches with 1.85 mm connectors.
 
Download Datasheet | Product Details
 
Waveguide Combiner / Divider
4 Way Waveguide Power Divider from 26.5 to 35 GHz

Waveguide Combiner / Divider from SAGE Millimeter

The SWP-27335304-28-E1 from SAGE Millimeter is a 4 Way Waveguide Power Divider that operates from 26.5 to 35 GHz. This Ka-Band in-line waveguide power divider has a typical insertion loss of 0.5 dB at each output port and a typical isolation of 25 dB. The ports are well balanced and in phase for either power dividing or power combining applications across the specified frequency range.
 
Download Datasheet | Product Details
 
Front End Module
GNSS Front-End Module with Integrated Pre-Filter and Post-Filter

Front End Module from Skyworks Solutions

The SKY65933-11 is a front-end module for GNSS applications with an integrated low-noise amplifier (LNA), pre-filter, and post-filter. The pre-filter and post-filter provide low in-band insertion loss and excellent rejection for the cellular, PCS, and WLAN frequency bands. The FEM operates from 1559 to 1606 MHz and consumes only 2.9 mA of current from a 1.8 V.
 
Download Datasheet | Product Details
 
RF & Microwave Isolator
Ku-Band Space Qualified Isolator from 13.75 to 14.80 GHz

RF & Microwave Isolator from DiTom Microwave

The DS1011 from DiTom is a Ku Band Space Qualified Isolator that operates from 13.75 to 14.80 GHz. It has an isolation of over 20 dB, an insertion loss of under 0.4 dB and can handle up to 10 watts of forward power. The isolator is available in a module that measures 0.5 x 0.7 x 0.5 inches with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-7370 from RF Electronics is a Standalone Portable RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. This fully portable design is equipped with caster wheels for ease of movement. It has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz.
 
Download Datasheet | Product Details
 
OCXO
Low Phase Noise OCXO from 500 to 1300 MHz

OCXO from NEL Frequency Controls

The O-CEGM-0XXXXXX-X from NEL Frequency Controls is an OCXO that operates from 500 to 1300 MHz with a frequency stability of ±50 ppb. It provides an extremely low phase noise of -145 dBc/Hz at a 10 kHz offset with a 12 dBm sine-wave output. The OCXO requires a 5 V supply and has low G-sensitivity of 0.5 ppb/G.
 
Download Datasheet | Product Details
 
RF Cable Assembly
Affordable Super Flexible Armored Test Cables up to 6 GHz

RF Cable Assembly from RF Industries

The P2RFC-2746-39 from RF Industries is a 1 meter N male to N male super flexible armored test cable. The cable can operate up to 6 GHz and has a propagation velocity of 70% and an insertion loss less than 2.5 dB. The test cable features a robust strain relief to counter the primary failure mode of the connector to cable junction.
 
Download Datasheet | Product Details
 
RF Cable Assembly
50 GHz Rugged Test Cables for Bench Testing

RF Cable Assembly from MegaPhase

The RF Orange Test Cables from MegaPhase have been developed for standard bench testing. These cables can operate at frequencies up to 50 GHz with excellent phase and amplitude performance. These rugged test cables can be used in the lab, production environment or in ATE systems. They can be used with a wide range of connectors including 1.85 mm, 2.4 mm, 2.92 mm, 3.5 mm, BNC, N Type, SMA, TNC, ZMA, and 7/16 DIN.
 
Download Datasheet | Product Details
 
RF Amplifier
2000 W Pulsed Power Amplifier from 1.2 to 1.4 GHz

RF Amplifier from KeyLink Microwave

The KNP1300M63A from KeyLink Microwave is an L-band high power pulsed amplifier module that operates from 1.2 to 1.4 GHz. This amplifier provides a pulse width of up to 50 uS with a duty cycle of up to 10%. It delivers a peak output power of 2000 watts into a 50 ohm load, while operating over a 50 V supply.
 
Download Datasheet | Product Details
 
RF Amplifier
Low Noise GaN Amplifier MMIC from 2 to 26 GHz

RF Amplifier from Custom MMIC

The CMD290 from Custom MMIC is a wideband GaAs MMIC distributed low noise amplifier die which operates from 2 to 26 GHz. The amplifier provides 12.5 dB of gain with a corresponding noise figure of 2.3 dB and an output 1 dB compression point of +19 dBm at 13 GHz. The CMD290 features an RF input survivability of 2 Watts.
 
Download Datasheet | Product Details
 
RF Amplifier
Ultra Wide Band Low Noise Amplifier from 0.03 to 65 GHz

RF Amplifier from RF-Lambda

The RLNA00M65GC from RF-Lambda is an ultra-wideband low noise amplifier that operates from 0.03 to 65 GHz. It provides a gain of over 16 dB with a noise figure of 5 dB and a saturated output power of up to 24 dBm. The amplifier requires a 12 V supply voltage. It is available in a module with 1.85-female connectors.
 
Download Datasheet | Product Details
 
Sponsored by PCB Directory
 
 
 
Wireless Charging Receiver
Wireless Charging Receiver for Low-Power Wearable Applications

Wireless Charging Receiver from Semtech

The TS51223 is a fully-integrated wireless power receiver that supports Qi, PMA, A4WP and proprietary wireless charging standards. It can operate by itself as a single-chip wireless power receiver in proprietary applications. It is available in a 20 ball WCSP package and is ideal for low-power, wearable and augmented reality applications.
 
Download Datasheet | Product Details
 
RF Module
Wi-Fi 802.11b/g/n and Bluetooth Stand-Alone Modules

RF Module from u-blox AG

The NINA-W15 series of stand-alone multi-radio modules integrate Wi-Fi, Bluetooth BR/EDR and Bluetooth low energy in a compact form factor. The modules support simultaneous operation on Wi-Fi and Bluetooth dual-mode and can thus serve as a gateway between Bluetooth and Wi-Fi or Ethernet.
 
Download Datasheet | Product Details
 
GNSS Module
Multi-GNSS Module with Integrated Patch Antenna

GNSS Module from Sierra Wireless

The AirPrime® XA1110 from Sierra Wireless is a Multi-GNSS Module with an integrated Patch Antenna. It supports tracking of GPS + Glonass or GPS + Glonass + Galileo satellite system combinations to deliver superior positioning accuracy of <2.5m (with SBAS). The module measures 12.5 x 12.5 x 6.8 mm with an integrated patch antenna.
 
Download Datasheet | Product Details
 
Band Pass Filter
0.1 to 910 MHz & 1680 to 1820 MHz Band Pass Filter

Band Pass Filter from Mercury Systems

The L1953 from Mercury Syatems is a Band Pass Filter with a passband from 0.1 to 910 MHz & 1680 to 1820 MHz. The filter has an insertion loss of under 0.3 dB and an isolation of more than 50 dB. It can handle up to 50 watts of CW power and is available in a module that measures 1.5 x 1.63 x 14 inches with APC 7 mm connectors.
 
Download Datasheet | Product Details
 
Signal Generator
8 kHz to 1/3/6 GHz RF Signal Generator

Signal Generator from Rohde & Schwarz

The R&S SMB100B is a compact analog signal generator available in various frequency options from 8 kHz to 1 GHz, 3 GHz and 6 GHz. The generator can deliver up to 34 dBm of output power (at 1 GHz carrier frequency) without an external amplifier. It provides an outstanding single sideband (SSB) phase noise of < -134 dBc (meas.) at 1 GHz and an offset of 20 kHz.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with new RF & Microwave products every week. Our search tool enables engineers to identify products from the leading manufacturers based on their specification. You can download datasheets and request quotations on products that meet your requirement.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]