PREV 7th Nov,2018 NEXT

New RF & Microwave Products this Week

7 Nov, 2018 - everything RF Newsletter

RF & Microwave industry updates. View it in your browser

 
everything RF
Date: 7 Nov, 2018
 
Sponsored by Coilcraft
 
 
 
New RF & Microwave Products this Week
Power Divider
8 Way Power Divider from 6 to 26.5 GHz

Power Divider from Mini Circuits

The ZC8PD-06263-S+ from Mini Circuits is a 8-Way Power Divider that operates from 6 to 26.5 GHz. It can handle up to 20 watts and has a low insertion loss across the frequency band, minimizing power dissipation and delivering excellent signal power transmission from input to output. The wide frequency bandwidth makes it ideal for a wide range of applications including 5G, Ku-Band, K-Band, instrumentation and many more.
 
Download Datasheet | Product Details
 
Waveguide Mixer
E-Band Quadrature Mixer or Phase Detector from 60 to 90 GHz

Waveguide Mixer from SAGE Millimeter

The SFQ-60390315-1212SF-E1-M is an E Band quadrature mixer that operates from 60 to 90 GHz. The conversion loss of the quadrature mixer is 15 dB with an LO driving power of +10 dBm and the LO to RF port isolation is 40 dB. Since the IF port of the quadrature mixer is DC coupled, the mixer can be used as a phase detector. In addition, the mixer can be readily configured into an image rejection mixer or single sideband modulator by adding an IF quadrature coupler.
 
Download Datasheet | Product Details
 
GNSS Module
Multi-GNSS Low Power Receiver Module

GNSS Module from Fujitsu

The MSB1054 from Fijitsu is a Multi-GNSS module that supports GPS, GLONASS, QZSS, SBAS, BeiDou and Galileo constellations. This module provides extremely accurate positioning in a very small form factor with ultra-low power consumption and optimized for short cold start. It is equipped with a special algorithm for arm swing compensation, making it an ideal component for smart watches.
 
Download Datasheet | Product Details
 
RF Test Set
Small, Light and Economical Base Station Analyzer for 2G/3G/4G Applications

RF Test Set from Anritsu

The MT8212E Cell Master Base Station Analyzer from Anritsu is a small, light and economical solution for 2G/3G/4G, and WiMAX base station transmitter testing and ISDB-T and DVB-T/H digital broadcast field testing from 2 MHz to 4 GHz. It's ideal for installation and commissioning as well as for maintenance and troubleshooting.
 
Download Datasheet | Product Details
 
Diplexer
Diplexer from DC to 1 GHz (Tx) and 1.5 to 2 GHz (Rx)

Diplexer from Response Microwave Inc

The RMDU.0-25004310f from Response Microwave is a Diplexer that operates from DC to 1 GHz (Tx) and 1.5 to 2 GHz (Rx). It has an insertion loss of 0.5 dB with 35 dB of rejection over the band and a return loss of 14 dB. The Diplexer can handle up to 50 watts of power and has a PIM of -150 dBc. It is available in a module that measures 2.4 x 7.30 x 1.3 inches with 4.3/10 female connectors.
 
Product Details
 
Digital Phase Shifter
6-Bit Digital Phase Shifter from 18 to 26 GHz

Digital Phase Shifter from RF-Lambda

The RFPSHT1826N6 from RF-Lambda is a 6-Bit digital phase shifter that operates from 18 to 26 GHz. It has a 360-degree phase control range with a 5.625 degree phase step size and an insertion loss under 16 dB. It can handle up to 23 dBm and requires a 12 V supply. The phase shifter is available in a module with 2.92 mm connectors. It is available in a Hermetically sealed package that can operate up to 60,000 ft on request.
 
Download Datasheet | Product Details
 
Sponsored by Coilcraft
Coilcraft
High Q/Tight Tolerance Air Core Inductors – Free Samples!
Coilcraft’s tight tolerance “spring” inductors combine the exceptionally high Q of an air-wound coil with the convenience of surface mounting. Offered in a wide variety of sizes & configurations with Q factors as high as 230 and current ratings up to 5.7 amps. Free samples available!
 
 
 
RF Amplifier
100 W Solid State High Power Amplifier from 20 MHz to 6 GHz

RF Amplifier from Empower RF

The 2198 from Empower RF is a tri-band amplifier housed in a single chassis and is suitable for high bandwidth, high power CW, modulated, and pulse applications. The amplifier system consists of three amplifiers: One from 20 MHz to 1000 MHz that provides 100 watts of power, another operates from 1000 to 3000 MHz and provides 100 watts of power and the third from 2000 to 6000 MHz and provides 40 watts of power.
 
Download Datasheet | Product Details
 
RF Amplifier
18,000 W Pulsed Amplifier System from 1 to 2 GHz

RF Amplifier from AR RF/Microwave Instrumentation

The 18000SP1G2 is a self-contained, forced air cooled, broadband solid-state microwave amplifier system designed for pulse applications at low to moderate duty factors where instantaneous bandwidth and high gain are required. This amplifier system operates from 1 to 2 GHz and provides pulsed power over 18,000 Watts.
 
Download Datasheet | Product Details
 
RF Amplifier
Cryogenic Amplifier from 0.001 to 0.5 GHz

RF Amplifier from AmpliTech

The APTC3-1M500M-1000-D6-V from AmpliTech is a Cryogenic Amplifier that operates from 1 to 500 MHz. It provides an output power of 0 dBm and gain of 20 dB with a noise figure of 1 dB. The amplifier requires a supply of 10 Vdc while consuming 31 mA of current. It is available in a drop-in package with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Cable
Low Loss RF Cables up to 50 GHz

RF Cable from MegaPhase

The GrooveTube from MegaPhase are low loss cables that operate up to 50 GHz. The cables provide high shielding effectiveness and can be used to make cable assemblies with 1.85 mm, 2.4 mm, 2.92 mm, 3.5 mm, Type-N, TNC, SMA and several other connectors. These cables are ideal for phased array radars, electronic warfare radar systems, and high reliability interconnects applications.
 
Download Datasheet | Product Details
 
Power Divider
20 Watt, 6-Way Power Divider from 1.5 to 2.7 GHz

Power Divider from MECA

The 806-2-2.100 from MECA is a 6-way power divider that operates from 1.5 to 2.7 GHz. It can handle up to 20 watts of power, has an insertion loss of under 0.8 dB and isolation over 22 dB. The power divider is available in a module with SMA Female connectors.
 
Download Datasheet | Product Details
 
Wireless SoC
Ultra-Low-Power Multi-protocol Bluetooth 5 System-on-Chip

Wireless SoC from ON Semiconductor

The RSL10 from ON Semiconductor is an ultra-low-power, multi-protocol Bluetooth 5 certified SoC for IoT and "connected" health and wellness devices. It has been specifically designed for applications using 1.2 and 1.5 V batteries, with a voltage supply range between 1.1 and 3.6 V without a required DC/DC converter.
 
Download Datasheet | Product Details
 
Sponsored by Coilcraft
 
 
 
RF Spectrum Analyzer
9 kHz to 1.5 GHz Spectrum Analyzer

RF Spectrum Analyzer from SIGLENT

The SVA1015X from Siglent is a Spectrum Analyzer that operates from 9 kHz to 1.5 GHz. The analyzer has a resolution bandwidth from 1 Hz to 1 MHz and a phase noise below -99 dBc/Hz @ 1 GHz with a 10 kHz offset. The base model is a swept super-heterodyne spectrum analyzer and optional functions include a vector network analyzer, a Frequency Domain Reflectometer based distance-to-fault locator, and a modulation analyzer.
 
Download Datasheet | Product Details
 
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer from Holzworth Instrumentation

The HA7062D from Holzworth is a real time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. The HA7062D has a high speed digital processor for speed, but the proven accuracy and speed starts with the analog front end. A key component of the analog front end is a pair of Holzworth HSX Series RF Synthesizers as the test system’s internal LOs.
 
Download Datasheet | Product Details
 
Up Converter
4 MHz/35 MHz Multi-Octave RF Upconverter

Up Converter from NuWaves Engineering

The RF2-3000UCV1 from NuWaves Engineering is a multi-octave RF upconverter that accepts an input signal from 2 MHz to 70 MHz and upconverts it to an output signal from 2 MHz and 3000 MHz with 5 kHz tuning resolution. It provides 50 dB of user-selectable attenuation control and has two IF bandwidth options of 4 MHz and 35 MHz.
 
Download Datasheet | Product Details
 
Wireless SoC
Bluetooth 5 Compliant IC for Automotive Applications

Wireless SoC from Toshiba

The TC35681IFTG-002 from Toshiba is a Bluetooth Low Energy IC developed for automotive applications. This device has been developed to operate in demanding automotive environments, as it delivers a wide operating temperature range, high RF transmission power and high RF reception sensitivity (a link budget of 113 dB @125 kbps at long range transmission).
 
Download Datasheet | Product Details
 
Directional Coupler
10/20 dB Directional Coupler from 500 MHz to 18 GHz

Directional Coupler from JFW Industries

The 50C-070-XX is a directional coupler from JFW Industries that operates from 500 MHz to 18 GHz. It is available with a coupling value of 10 dB or 20 dB and can handle up to 50 watts of RF input power. The coupler is available in a module with SMA connectors.
 
Download Datasheet | Product Details
 
Between Series RF Adapter
2.4mm NMD jack to 3.5mm jack Adapter up to 34.5 GHz

Between Series RF Adapter from Jyebao

The ADS-VNA2.4/8PC8 from Jyebao is a 2.4mm NMD jack to 3.5mm jack adapter that operates up to 34.5 GHz. It has a VSWR of up to 1.20:1 and is matched to 50 ohms. The adapter has a stainless steel body with a Beryllium Copper contact pin.
 
Download Datasheet | Product Details
 
Power Divider
4-Way SMT Power Divider from 500 to 7 GHz

Power Divider from BBTLine

The BBTLine_4Way_SMT from BBTLine is a 4-Way SMT Power Divider that operates from 500 to 7 GHz. It can handle up to 20 watts of power and has an Amplitude Balance of ± 0.15 dB and Phase Balance of ± 2.5 Degree. The divider has a port to port isolation of over 11 dB across the band. It is available in a compact surface mount package.
 
Download Datasheet | Product Details
 
RF Inductor
Common Mode Chokes with 11 µH to 100 µH Inductance

RF Inductor from Coilcraft

The 1812CAN Series from Coilcraft are Common Mode Chokes with inductance values from 11 µH to 100 µH. These common mode chokes provide noise suppression on CAN (1 Mbps) or CAN FD (5 Mbps) data lines in automotive and industrial automation applications. CAN Common Mode Chokes are the most commonly-used filter component to attenuate common mode noise at the CAN bus (Controller Area Network) transceiver’s output.
 
Download Datasheet | Product Details
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, white papers, technical articles, interviews and information on new product releases.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]