PREV 5th Nov, 2018 NEXT

Latest News & White Papers this Week

5 Nov, 2018 - everything RF Newsletter

RF & Microwave industry updates.

 
everything RF
Date: 5 Nov, 2018
 
Sponsored by Anokiwave
 
 
 
Latest News this Week
AT&T Conducts World’s First mm-Wave Mobile 5G Browsing Session on a 5G Mobile Device - AT&T
Military Drones Market Expected to be Worth USD 26.8 billion by 2025 - MarketsandMarkets
New Evaluation Board Makes Testing Standard Crystal Oscillators Easy - IQD Frequency Products
Fujitsu Introduces Ultra Low Power GNSS Receiver Module - Fujitsu
New Software Solution to Help Optimize the Battery Life of IoT Devices - Keysight Technologies
Rohde & Schwarz Revenue Surpasses 2 Billion Euros for the First Time - Rohde & Schwarz
Qorvo Beats Expectations with Strong Fiscal 2019 Second Quarter - Qorvo
New PIM Finder to Locate Sources of External PIM Outside Antenna Infrastructure - Kaelus
pSemi Starts Volume Production of its 55 GHz Digital Step Attenuator - pSemi
Terahertz Data Links May Not Be As Secure As Everyone Thought! - Brown University
Keysight EMI Receiver Solution to Accelerate EMC Compliance Testing - Keysight Technologies
R&S Updates its EMC Test Software to Fully Automate Electromagnetic Interference Testing - Rohde & Schwarz
II-VI & Sumitomo Collaborate to Develop 150 mm GaN on SiC HEMT Fabrication Platform - Sumitomo
More News
New White Papers
Specifying RF/Microwave Power Amplifiers for EMC Testing - AR RF/Microwave Instrumentation
Wireless Technology Evolution: Transition from 4G to 5G - 5G Americas
Millimeter-Wave Radio Transmission: An Application and Technology Primer - LightPointe
Designing a Top-Notch Dead Reckoning GNSS Navigation System - Telit Communications
7 Reasons You're Paying Too Much for Your Spectrum Analyzer - Signal Hound
More White Papers
Upcoming Event
Event Image
Electronica 2018

Date: 13 to 16 November, 2018

Location: Messe München, Germany

 
More Events
Sponsored by Anokiwave
Anokiwave
Imagine a new world where array calibration is not needed…It’s here.
5G antennas that leverage Anokiwave’s highly integrated silicon ZERO-CAL® ICs will see a drastic reduction in material and assembly costs by eliminating the need for array calibration. The continued reduction in antenna cost coupled with the ability to optimize and monitor technical performance in the field is paving the way for rapid deployment of 5G systems across the globe. Click here to learn more.
 
 
 
Featured Products this Week
Frequency Synthesizer
Low Cost YIG Frequency Synthesizer from 6 to 13 GHz

Frequency Synthesizer from Teledyne Microwave Solutions

The YIG Frequency Synthesizer from teledyne microwave operates from 6 to 13 GHz. The synthesizer can generate a signal with a power level of more than 11 dBm, which has harmonics of -20 dBc and spurious suppression of -60 dBc. The frequency synthesizer has low phase noise of less than -125 dHc/Hz @ 100 KHz and has a channel step size of 1 MHz.
 
Download Datasheet | Product Details
 
Bias Tee
50 GHz Bias Tee with High Isolation

Bias Tee from AtlanTecRF

The ABT Series of Bias Tees from AltanTecRF is a range of 3-port devices that operate up to 50 GHz. They can be used in transmission systems to deliver DC power and RF signal to amplifiers and frequency converters using only one coaxial cable. The Bias Tees have an insertion loss of under 4 dB, an isolation over 50 dB and a VSWR of 2.0:1.
 
Download Datasheet | Product Details
 
RF Cable
Low Loss Armored Test Cables for Compliance Measurements

RF Cable from MegaPhase

The EM Series from MegaPhase are Armored Test Cables that operate up to 40 GHz. These low loss, ultra-rugged cables are constructed using materials that meet electromagnetic compatibility testing standards. They provide excellent shielding effectiveness of -120 dBc and the benefits of crush resistant armoring.
 
Download Datasheet | Product Details
 
RF Variable Attenuator
4-Bit Digital Attenuator from DC to 31 GHz

RF Variable Attenuator from United Monolithic Semiconductors

The CHT3029-QEG from UMS is a 4-Bit Digital Attenuator that operates from DC to 31 GHz. This GaAs MMIC device has been manufactured on a pHEMT process with 0.25 um gate length. It has an attenuation range of 15 dB with a LSB (step size) of 1 dB. The attenuator has a return loss of 12 dB requires +/-5 V DC Bias. It is available in a QFN package that measures 4 x 5 mm.
 
Download Datasheet | Product Details
 
DLVA
SDLVA from 0.5 to 18 GHz with 70 dB Dynamic Range

DLVA from Planar Monolithics Industries

The SDLVA-0R5G18G-50R-30DBM from PMI RF is a SDLVA that operates from 0.5 GHz to 18 GHz. It has a TSS of -71 dBm and a log range from -70 to 0 dBm. It has a Video output range from 0 to 2.2 VDC and can handle up to 30 dBm of input CW power. The SDLVA has a pulse range of 50 ns CW. It is available in a module with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
4 W Power Amplifier from 1900 to 2000 MHz for Small Cell Base Stations

RF Amplifier from Skyworks Solutions

The SKY66299-11 is a high-efficiency 4 watt power amplifier that operates from 1900 MHz to 2000 MHz. This compact 5 x 5 mm PA is designed for FDD and TDD 2G/3G/4G LTE small cell base stations (3GPP bands covered include 2, 25, 33, 36, and 37). It has active biasing circuitry to compensate for PA performance over temperature, voltage, and process variations.
 
Download Datasheet | Product Details
 
RF Amplifier
8,000 W Pulsed Power Amplifier from 1 to 2 GHz

RF Amplifier from Exodus Advanced Communications

The AMP2131-1P from Exodus Advanced Communications is a solid state pulsed power amplifier that operates from 1 to 2 GHz. The amplifier provides a pulsed output power of over 8000 watts with a gain of over 69 dB. This GaN amplifier is based on a class AB design and is ideal for high power L-Band long pulse applications.
 
Download Datasheet | Product Details
 
RF Amplifier
800 MHz to 4.3 GHz, 100 W Rack Mount SSPA

RF Amplifier from KeyLink Microwave

The KB0842S50A from Keylink Microwave is a rack-mountable power amplifier that operates from 0.8 to 4.2 GHz. This 100 watt SSPA provides a gain of over 50 dB and is based on GaN technology. It provides excellent power density, high efficiency, low distortion and a wide dynamic range. The unit incorporates a universal voltage power supply and a built-in forced air-cooling system.
 
Download Datasheet | Product Details
 
RF Shielded Test Enclosure
Benchtop RF Shield Box from 20 MHz to 6 GHz

RF Shielded Test Enclosure from RF Electronics

The HDRF-S860 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. The enclosure has a thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz. It has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
 
Download Datasheet | Product Details
 
Band Pass Filter
Digitally-Controlled Filtering System for Testing LTE/WiFi Applications

Band Pass Filter from K&L Microwave

The Digitally-Controlled Adjustable Bandwidth Tunable filter from KL Microwave has been developed for LTE and WiFi testing. Its passband can be tuned to any frequency range between 700 MHz and 6000 MHz. The system has a software interface for automated testing and can be accessed by a web-based user interface on devices such as smartphones, tablets and computers.
 
Download Datasheet | Product Details
 
Fixed Attenuator
100 W Attenuators from DC to 3 GHz

Fixed Attenuator from Innowave RF

The 311-3G-100 Series of RF Coaxial Attenuators from Innowave RF operate from DC to 3 GHz. These attenuators can handle up to 100 watts of power and are available in attenuation configurations of 6 dB, 10 dB, 15 dB, 20 dB and 30 dB. The attenuators have a VSWR of less than 1.2:1 and a PIM level of -120 dBc (2 Tone 43 dBm each).
 
Download Datasheet | Product Details
 
Base Station Antenna
8-Port Multi-Beam Base Station Antenna from 698–894 MHz (4 ports) and 1710-2180 MHz (4 Ports)

Base Station Antenna from CommScope

The 2UNPX206.12R2 from CommScope is a 8-port multi-beam antenna that operates from 698–894 MHz (4 ports) and 1710-2180 MHz (4 Ports). It has a 4x35° HPBW, 4x RET (Remote Electrical Tilt). The antenna provides a gain of over 14.9 dB across all bands and can handle up to 300 watts of power. It has 7-16 DIN Female connectors at each port and has been developed for outdoor use.
 
Download Datasheet | Product Details
 
Tower Mount Amplifier
1800/2600 MHz Twin Tower Mount Amplifiers

Tower Mount Amplifier from Amphenol Antenna Solutions

The TTA-DU1 Series of Amplifiers from Amphenol Antenna Solutions are 1800/2600 MHz Dual-Mode Twin Tower Mount Amplifiers. The amplifier operates from 1710 to 1785 MHz (uplink) / 1800 MHz in the downlink and 2500 to 2570 MHz (uplink) / 2600 MHz band in the downlink with a gain of 12 dB, noise figure of less than 2.6 dB and an OIP3 of 25 dBm.
 
Download Datasheet | Product Details
 
RF Tapper
30 dB (1000:1) RF Tapper from 350 MHz to 5.93 GHz

RF Tapper from Microlab

The DN-14FN series of Tapper from Microlab operate from 350 MHz to 5.93 GHz with a 1000:1 split ratio. The RF tapper has an insertion loss of 0.1 dB and can handle up to 500 watts of CW power and 3 kW of Peak Power. The tapper is available in a module with N Type Female connectors (4.3-10 connectors are available on request).
 
Download Datasheet | Product Details
 
RF Repeaters
5 W Digital Repeater for 700/800 MHz Public Safety Bands

RF Repeaters from Advanced RF Technologies

The PSR-78-9537 from ADRF Tech is a Channelized 5 Watt Digital Repeater designed for use in the 700 and 800 MHz bands which have been designated for use to firefighters and the police. It has been designed to protect the lives of first responders and building occupants by ensuring blanket connectivity, regardless of the building layout and type of emergency.
 
Download Datasheet | Product Details
 
Multicoupler
HF-Band High Dynamic Range Multicoupler

Multicoupler from Mu-Del Electronics

The MDP-0530C from Mu-Del is a high dynamic range Multicoupler that operates from 0.5 to 30 MHz. The Multi-Coupler has Up to 4 Input ports and up to 16 output ports. The number of input/output ports can be modified based on a customers requirement. It provides a gain of 1 + 2 dB and has a noise figure of less than 9 dB with excellent port to port isolation.
 
Download Datasheet | Product Details
 
Sponsored by Anokiwave
 
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. Our weekly newsletters cover the top news stories of the week, new product releases, new white papers and upcoming events.

To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]